XDS510 USB JTAG EMULATOR - SPECTRUM DIGITAL

Driver CD ROM

System Hardware and Software Requirements

These operating platform requirements are necessary to

install the Code Composer Studio (CCS) int egrated

Development Environment and sup port the XDS510-USB

emulator. The requirements for the operating platform are:

Minimum Configuration

• 500 MHz. or faster Pentium or compatible

• 600MB of free hard disk space

• SVGA (640x480) color display

• Local CD-ROM Drive

DS510 USB JTAG Emulator

Set-up Instruction

The XDS510 USB contains:

USB Cable

XDS510 USB

Recommended

• 500MB of RAM

• SVGA (1024 x 768) color display

• 2GHz. or faster Pentium or compatible

Supported Operating System CCS 3.x

• Windows 2000 Service Pack 4

• Windows XP Pro Service Pac k 1&2

• Windows XP Home Service Pack 1&2

Supported Operating System CCS 2.2x

• Same as CCS 3.x, plus

• Windows 98SE/ME (not recommended)

506186-4001B Page 1 of 4

12502 Exchange Dr., Ste 440, Stafford, TX. 77477 T:281.494.4505, F:281.494.5310 www.spectrumdigital.com

Note: For Windows 2000 and XP you must install Code

Composer Studio using Administrator privileges. To run CCS on

these systems requires write permission on the registry.

The install CD contains emulation drivers for both CCS 2.2x and

CCS 3.1x environments along with legacy driver support,

SDFlash algos for C2000, and assorted manuals. To install any of

the legacy support you must browse the CD and install by

selecting the appropriate install program.

The CCS 2.2x and CCS 3.1x driver install supports all Spectrum

Digital emulators. Emulation drivers are updated on a regular

basis so check the Spectrum Digital web site at

support.spectrumdigital.com.

Installing Emulation Drivers

1. Insert the installation CD into the CD-ROM Drive. An

install screen should appear; if not, go to Windows

Explorer and run launch.exe from the CD-ROM.

2. Select the CCStudio product version and then the

processor of interest. For CCS 2.2x drivers you have

the choice of C2000, C6000 a nd

OMAP(C54/C55/ARM). For CCS 3.1x platinum there

is only one choice and it includes all processors in

one install. When installing e m ulation drivers the

default install should be changed to same directory as

you targeted CCStudio install. For CCS 2.2x this is

normally “c:\ti” and for CCS 3.1x this is normally

“c:\CCStudio_v3.1”.

3. Plug the supplied USB cable into an available port on

your PC or HUB. Use of a USB HUB is

recommended as it provides added isolation between

your debug environment and PC.

4. Plug the XDS510-USB emulator into the other end of

the supplied USB cable. Windows will recognize a

new USB device and pop-up the new hardware found

wizard. Follow the instructions and let Windows find

the USB drivers located on the install CD

(sdusbem.sys and sd510u2.inf). If properly installed

Windows will create a new device class named “SD

USB Based Debug Tools”. The XDS510-USB device

will show up as a “Spectrum Digital XDS510 USB”

under this class. You can view this information under

Windows Device Manager.

Setting Up Code Composer

1. Select the Code Composer Setup icon from the

desktop.

2. From CC Setup you can either import a new

configuration or select from an existing one. From the

filters pane select the platform “xds510usb”. This will

give you a list of predefined configurations for the

XDS510USB emulator. If one of these configurations

does not exactly match your target then s ele ct the

closet configuration. You can then modify thi s

configuration to meet your ne eds. Setup between

CCS 2.2x and 3.x has changed dramatically so see

your CCStudio docs for more details.

3. If you want to change the configuration of your setup

simply right mouse click on the configuration under

System Configuration then select Properties. You

can modify the individual pr operties for your setup.

The I/O Port under Board Properties should be set to

0x510 for the XDS510-USB emulator.

4. Save your configuration a nd exit CC Setup.

Running Code Composer

You can now start Code Composer b y dou ble-clicking on

the appropriate CCS icon. When CCS starts the XDS510-

USB application loader will download the emulation driver

application. Once the emulation application is loaded, the

XDS510-USB emulator will enumerate and CCS will start.

If there is a problem during the load or enumerate phase

then the loader app will display an error/status message.

If you are running CCS 3.1, once CCS has started select

Debug->Connect from the menu bar. Target

Connect/Disconnect is a new feature in CCS 3.1, for

more details go to your CCS online help.

506186-4001B Page 2 of 4

12502 Exchange Dr., Ste 440, Stafford, TX. 77477 T:281.494.4505, F:281.494.5310 www.spectrumdigital.com

Support

1. Always check the Spectrum Digital web site at

support.spectrumdigital.com for latest drivers,

release notes, and tech supp ort. If you are using

CCS 3.1 then you can also go directly to the CCS 3.1

page at support.spectrumdigital.com/ccs31. The

CCS 3.1 page contains CC setup configurations for

many popular Spectrum Digital target boards along

with CCS 3.1 specific support information.

Trouble Shooting XDS510USB

1. Windows install message that there is not enough

power for the XDS510-USB. This may occur if you

are using an unpowered USB HUB. Solution is to use

powered USB HUB.

2. The XDS510-USB application loader will repo r t

error/status messages. Check these messages to

resolve setup or connection is sues.

3. CCS will not start. XDS510-USB drivers will create a

diagnostic file in the CCS drivers’ directory named

“Pid1_Xds510UsbLog.txt”. Open this file and check

the error messages. The “Pidx_” prefix identifies the

internal processor id. There i s one log per processor.

You can disable logs by deleti ng or renaming the file

“SdDoUsbLog”.

506186-4001B Page 3 of 4

12502 Exchange Dr., Ste 440, Stafford, TX. 77477 T:281.494.4505, F:281.494.5310 www.spectrumdigital.com

XDS510USB Hard ware Revision B

Spectrum Digital will migrate the XDS510USB emulator to

revision B in July of 2005. Revision B is an emulation

processor upgrade. As a side effect users must upgrade

to CCS emulation driver release 2.21.00 or higher with

revision B XDS510USB to ensure full compatibility.

Emulation driver version 2.21.00 and higher full y support

both revision A and B of the XDS510USB emulator.

XDS510USB revision B is easily identified by (B) in the

lower left corner of the product label.

If you cannot visually determine if you have a Rev A or

Rev B XDS510USB emulator then you can use the

SdConfig utility to determine the version.

In SdConfig do: "Configuration->Ports Available-

>Printer,USB"

Results for Rev A XDS510USB

** Checking for available USB ports

$$ XDS510USB connected on:

$$ EmuPortAddr=0x510

$$ EmuSerialNumber=S071537725020422

The last 4 digits of "0422" indicate a Rev A emulation

processor.

Results for Rev B XDS510USB

** Checking for available USB ports

$$ XDS510USB connected on:

$$ EmuPortAddr=0x510

$$ EmuSerialNumber=S064407522112522

The last 4 digits of "2522" indicate a Rev B emulation

processor.

There is a possibility that you have an emulation driver

release between 2.20.00 and 2.21.00 that supports the

XDS510USB revision B emulator. In that case you can

continue using yo ur emulation driver with the XDS510USB

revision B. If your emulation driver does NOT support

XDS510USB revision B then when you start CCS you

should get an error dialog similar to the scr een below.

This indicates that the emulation driver software is

unaware of the underlying emulation controller version. If

this occurs and you have verified your emulator is a

revision B then you will have t o upgrade your emulation

drivers to 2.21.00 or higher.

506186-4001B Page 4 of 4

12502 Exchange Dr., Ste 440, Stafford, TX. 77477 T:281.494.4505, F:281.494.5310 www.spectrumdigital.com