70010006180 - 3M - Product.Network

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ MetPak™ 2-FB Inverse Header

2 mm 5-Row, Right Angle, Solder Tail MP2 Series

• Three levels of early mate, late break (EMLB)

• sequencing or selective loading options

• Footprint compatible with standard Futurebus+®

• Solder tail with true-position wafer

• Ideal for hot swapping applications

• End-to-end stackable

• Right angle male for daughter card

• Mates with MP2-R for backplane applications and

MP2-SXXXG for coplanar applications

• RoHS Compliant. See the Regulatory Information

Appendix (RIA) in the “RoHS compliance” section

of www.3Mconnectors.com for compliance

information (RIA E1 & C1 apply)

Date Modiﬁed: September 17, 2013 TS-1122-C

Sheet 1 of 4

Physical

Insulation:

Material: High Temp LCP

Flammability: UL 94V-0

Color: Beige

Contact:

Material: Copper Alloy

Plating:

Underplating: 50 µ" [1.27 µm] Nickel

Wiping Area: See Ordering Information

Solder Tails: See Ordering Information

Electrical

Current Rating: Signal: 1.5 A – All contacts simultaneously

Insulation Resistance: 103 MΩ

Withstanding Voltage: 1000 V

Environmental

Temperature Rating: -55°C to +125°C

Process Temperature Rating: 260°C (Proﬁle per J-STD-020C)

Moisture Sensitivity Level: 1 (per J-STD-020C)

UL File No.: E68080 MetPak is a trademark of 3M Company.

Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ MetPak™ 2-FB Inverse Header

2 mm 5-Row, Right Angle, Solder Tail MP2 Series

TS-1122-C

Sheet 2 of 4

Ordering Information

MP2 - PXXX - 5XM1 - XXXXX

Rows

5 = 5 Rows

P = Right Angle Header

Inversed

Loading Pattern and Tail

Length (See Table 2)

Plating Options

(See Table 3)

Pin Count

(See Table 1)

Termination Style

M = Solder Tail

Notes:

1. Refer to IEC 61076-4-104 Futurebus+® global standard.

2. For special pin arrangements, contact 3M.

[inch]

Tolerance Unless Noted

0 0.0 0.00

mm ±3 ±0.3 ±0.13

[ ] Dimensions for Reference

Only

1.50

.059

17.80

.701

2.00

.079

MATING LENGTH

7.00

.276

16.80

.662

3.86

.152

4.00

.157 8.00

.315

2.00

.079 4X

13.90

.547

3.75

.148

TAIL LENGTH "B"

2.00

.079 TYP.

MATED WITH MP2-RXXX-5XXX-XXXX

"A"

2.00

.079 TYP.

13.00

.512

17.00

.669

ROW

POSITION X

POSITION 2

POSITION 1

C D

E A

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ MetPak™ 2-FB Inverse Header

2 mm 5-Row, Right Angle, Solder Tail MP2 Series

TS-1122-C

Sheet 3 of 4

Table 2 - Mate & Tail Lengths, mm vs. Loading Pattern

Pattern

Code

Description

Mate

Length

Row A

Mate

Length

Row B

Mate

Length

Row C

Mate

Length

Row D

Mate

Length

Row E

Tail

Length

Row A

Tail

Length

Row B

Tail

Length

Row C

Tail

Length

Row D

Tail

Length

Row E

1All Positions Filled 5.00 5.00 5.00 5.00 5.00 3.30 3.30 3.30 3.30 3.30

2All Positions Filled 4.25 5.00 5.00 5.00 5.00 4.05 3.30 3.30 3.30 3.30

3All Positions Filled 3.50 4.25 4.25 5.00 5.00 4.80 4.05 4.05 3.30 3.30

4All Positions Filled 4.25 5.00 4.25 4.25 4.25 4.05 3.30 4.05 4.05 4.05

5Rows A, B, C and D Filled 5.00 5.00 5.00 5.00 NA 3.30 3.30 3.30 3.30 NA

6Rows A, B, C and D Filled 5.00 4.25 4.25 5.00 NA 3.30 4.05 4.05 3.30 NA

7All Positions Filled 4.25 5.00 4.25 5.00 4.25 4.05 3.30 4.05 3.30 4.05

8All Positions Filled 4.25 4.25 4.25 4.25 4.25 4.05 4.05 4.05 4.05 4.05

9All Positions Filled 5.00 3.50 3.50 3.50 4.25 3.30 4.80 4.80 4.80 4.05

AAll Positions Filled 3.75 4.50 5.25 4.50 3.75 4.55 3.80 3.05 3.80 4.55

BAll Positions Filled 3.75 4.50 3.75 4.50 3.75 4.55 3.80 4.55 3.80 4.55

CAll Positions Filled 5.75 5.75 5.75 5.75 5.75 2.55 2.55 2.55 2.55 2.55

DAll Positions Filled 4.25 5.00 5.75 5.00 4.25 4.05. 3.30 2.55 3.30 4.05

EAll Positions Filled 5.00 5.75 5.75 5.75 5.00 4.05 4.05 4.05 4.05 4.05

GRows A, B, C and D Filled 5.00 4.25 4.25 5.00 NA 3.30 4.05 4.05 3.30 NA

Table 3 - Plating

Plating Sufﬁx Plating Composition

(RIA E1 & C1 apply)

0.76 µm [30 µ”] Min. Au Contact Area

2.54 µm [100 µ”] Min. Matt Whisker Mitigating Sn Tail Area

1.27 µm [50 µ”] Min. Ni all over

(RIA E1 & C1 apply)

0.08 µm [3 µ”] Min. Au Contact Area

0.67 µm [27 µ”] Min. PdNi Contact Area

2.54 µm [100 µ”] Min. Matt Whisker Mitigating Sn Tail Area

1.27 µm [50 µ”] Min. Ni all over

Table 1 - Connector & Row Lengths

Pin Count Dim. “A” mm

[inch]

Dim “B” mm

[inch] Rows

030 11.95 [0.471] 10.00 [0.394] 5

060 23.95 [0.943] 22.00 [0.866] 5

090 35.95 [1.415] 34.00 [1.339] 5

120 47.95 [1.889] 46.00 [1.811] 5

150 59.95 [2.36] 58.00 [2.283] 5

180 71.95 [2.833] 70.00 [2.756] 5

210 83.95 [3.305] 82.00 [3.228] 5

240 95.95 [3.778] 94.00 [3.701] 5

270 107.95 [4.251] 106.00 [4.173] 5

300 119.95 [4.722] 118.00 [4.646] 5

420 167.95 [6.612] 166.00 [6.535] 5

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ MetPak™ 2-FB Inverse Header

2 mm 5-Row, Right Angle, Solder Tail MP2 Series

TS-1122-C

Sheet 4 of 4

Table 4 - HOLE PLATING FINISHES

HOLE Finished Dia.

MM [in]

Cu Thickness [mm

[in]

Immersion Matte

Sn Thickness

microns [µ”]

Electrolytic Au

Thickness

microns [µ"]

OSP ENTEK

Thickness

microns [µ”]

Drilled Hole

Dia. mm [in]

“D” 0.700-0.800

[.0276-.0315]

0.025-0.045

[0.001-0.002]

0.5 - 2.5

[20 - 100]

0.1 - 0.5

[4 - 20]

0.2 - 0.5

[8 - 20]

0.830-0.860 [.0330-

.0340] or 0.85 mm

[#66] TWIST DRILL

4.00

.157

"B"

2.00

.079TYP.

2.00

.0794X

8.00

.315

4.00

.157

1.00

.039

12.00

.472

"D" PLATED THRU HOLE

2.05 +.05

-.00

.081 +.002

-.000

TYP. UNPLATED THRU HOLE

1.50 +.10

-.00

.059+.004

-.000

TYP. UNPLATED THRU HOLE

3.00

.118

.10

INCLINATION TOLERANCES

1.25

.049 INITIAL

OFFSET ALLOWABLE 1.00

.039 INITIAL

OFFSET ALLOWABLE

1.5° 1°

RECOMMENDED PCB HOLE MOUNTING PATTERN

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,

but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for

your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are

not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect

unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES

NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s

option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will

not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of

the legal theory asserted.

3M Electronics Solutions Division

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373

www.3Mconnectors.com

Please recycle. Printed in USA.

RIA-2217B-E

3M is a trademark of 3M Company.