MIL-PRF (CWR Style) Established Reliability T409 Series CWR09 Style MIL-PRF-55365/4 Overview The KEMET T409 series is approved to MIL-PRF-55365/4 (CWR09), with Weibull failure rates of B level (0.1% failures per 1000 hours), C level (0.01% failures per 1000 hours), or D level (0.001% failures per 1000 hours). This CWR09 product is a precision-molded device, with compliant terminations and indelible laser marking. Tape and reeling per EIA 481-1 is standard. Benefits * * * * * * * * * * Established reliability options Taped and reeled per EIA 481-1 Symmetrical, compliant terminations Laser-marked case 100% surge current test available on all case sizes Qualified to MIL-PRF-55365/4, Style CWR09 Termination options B, C, H, K Weibull failure options B, C, and D Voltage rating of 4-50 VDC Operating temperature range of -55C to +125C Applications Typical applications include decoupling and filtering in Military and aerospace applications requiring CWR09 devices. Environmental Compliance RoHS Compliant (6/6)* according to Directive 2002/95/EC *When ordered with 100% Sn Solder SPICE For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One WORLD One Brand One Strategy One Focus One Team (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com One KEMET TC105-1 ** 5/19/2011 T2001-1 5/19/2011 19 Tantalum (CWR MIL-PRF Surface Style) Mount Established CapacitorsReliability - MIL-PRF - T409 (CWR Series Series) CWR09 Style MIL-PRF-55365/4 Ordering Information - T409 Series CWR09 Style MIL-PRF 55365/4 T 409 G 225 K 004 A H 4252 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material Surge T= CWR 09 A = 1005 First two digits Tantalum Established B = 1505 represent significant Reliability C = 2005 figures. Third digit D = 1510 specifies number of E = 2010 zeros. F = 2214 G = 2711 H = 2915 J = 5% K = 10% M = 20% 004 = 4V 006 = 6.3V 010 = 10V 015 = 15V 020 = 20V 025 = 25V 035 = 35V 050 = 50V A = N/A C = Hot Solder Dipped 4250= 25C after Weibull B = 0.1%/1000 hrs H = Standard Solder 4251 = -55C and 85C C = .01%/1000 hrs Coated (SnPb 5% Pb after Weibull D=.001%/1000 hrs minimum) 4252 = -55C and 85C B = Gold Plated before Weibull K = Solder Fused Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 0.1F - 100F @ 120 Hz/25C J Tolerance (5%), K Tolerance (10%), M Tolerance (20%) 4V - 50V DF(120Hz) Refer to Part Number Electrical Specification Table ESR (100kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01CV (A) at Rated Voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com TC105-1 ** 5/19/2011 T2001-1 5/19/2011 102 Tantalum (CWR MIL-PRF Surface Style) Mount Established CapacitorsReliability - MIL-PRF - T409 (CWR Series Series) CWR09 Style MIL-PRF-55365/4 Qualification Qualifi cation - T409 Series CWR09 Style MIL-PRF 55365/4 Test Condition Characteristics C/C Endurance Storage Life Thermal Shock Temperature Stability 85C @ Rated Voltage, 2000 Hours. 125C @ 2/3 Rated Voltage, 2000 Hours. 125C @ 0 Volts, 2000 Hours. MIL-Std-202, Method 107, Condition B, mounted, -55C to 125C, 1000 cycles. Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C. DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +125C C/C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL C/C Surge Voltage Mechanical Shock/Vibration Within 10% of initial value 25C and 85 C, 1.32 x Rated Voltage 1000 cycles (125C, 1.2 x Rated Voltage). MIL-Std-202, Meth. 213, Cond. I, 100G Peak. MIL-Std-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G Peak. Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial Limit Certification MIL-PRF-55365/4 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com TC105-1 ** 5/19/2011 T2001-1 5/19/2011 113 Tantalum (CWR MIL-PRF Surface Style) Mount Established CapacitorsReliability - MIL-PRF - T409 (CWR Series Series) CWR09 Style MIL-PRF-55365/4 Electrical Characteristics - T409 Series CWR09 Style MIL-PRF 55365/4 Capacitance vs. Frequency ESR vs. Frequency 100 1000 100 T409F156/010 T409F156/010_IMP T409H476/010 Capacitance (F) Impedance, ESR (Ohms) T409D475/010 T409D475/010_IMP T409H476/010_IMP T409D475/010_ESR T409F156/010_ESR T409F476/010_ESR 10 10 1 1 0.1 0.1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 Frequency (Hz) 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Case Size Component KEMET L* +/- 0.38 (.015) W* +/- 0.38 (.015) H* +/- 0.38 (.015) P +.025(.010), -0.13(.005) W2 A B C D E F G H 2.54 (.100) 3.81 (.150) 5.08 (.200) 3.81 (.150) 5.08 (.200) 5.59 (.220) 6.73 (.265) 7.24 (.285) 1.27 (.050) 1.27 (.050) 1.27 (.050) 2.54 (.100) 2.54 (.100) 3.43 (.135) 2.79 (.110) 3.81 (.150) 1.27 (.050) 1.27 (.050) 1.27 (.050) 1.27 (.050) 1.27 (.050) 1.78 (.070) 2.79 (.110) 2.79 (.110) 0.76 (.030) 0.76 (.030) 0.76 (.030) 0.76 (.030) 0.76 (.030) 0.76 (.030) 1.27 (.050) 1.27 (.050) 1.27 +/- 0.13 (.050 +/- .005) 1.27 +/- 0.13 (.050 +/- .005) 1.27 +/- 0.13 (.050 +/- .005) 2.41 +.13, -.25 (.095 +.005, -.010) 2.41 +.13, -.25 (.095 +.005, -.010) 3.30 +/- 0.13 (.130 +/- .005) 2.67 +/- 0.13 (.105 +/- .005) 3.68 +.013, -0.51 (.145 + .005, - .020) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com TC105-1 ** 5/19/2011 T2001-1 5/19/2011 124 Tantalum Surface Mount Capacitors - MIL-PRF (CWR Series) Table 1 - T409 Series CWR09 Style MIL-PRF 55365/4, Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity 85C VDC 4 4 4 4 4 4 4 4 120Hz F 2.2 4.7 6.8 10 15 33 68 100 KEMET/EIA A/1005 B/1505 C/2005 D/1510 E/2010 F/2214 G/2711 H/2915 (See below for part options) T409A225(1)004(2)(3)(4) T409B475(1)004(2)(3)(4) T409C685(1)004(2)(3)(4) T409D106(1)004(2)(3)(4) T409E156(1)004(2)(3)(4) T409F336(1)004(2)(3)(4) T409G686(1)004(2)(3)(4) T409H107(1)004(2)(3)(4) (See below for part options) CWR09C(3)225(1)(2)(5) CWR09C(3)475(1)(2)(5) CWR09C(3)685(1)(2)(5) CWR09C(3)106(1)(2)(5) CWR09C(3)156(1)(2)(5) CWR09C(3)336(1)(2)(5) CWR09C(3)686(1)(2)(5) CWR09C(3)107(1)(2)(5) Amps +20C max/5min 0.1 0.2 0.3 0.4 0.6 1.3 2.7 4.0 +20C 120Hz % Max 6.0 6.0 6.0 8.0 8.0 8.0 10.0 10.0 +20C 100kHz Ohms 8.0 8.0 5.5 4.0 3.5 2.2 1.1 0.9 Temp260C J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 1.5 3.3 4.7 6.8 10 22 47 68 A/1005 B/1505 C/2005 D/1510 E/2010 F/2214 G/2711 H/2915 T409A155(1)006(2)(3)(4) T409B335(1)006(2)(3)(4) T409C475(1)006(2)(3)(4) T409D685(1)006(2)(3)(4) T409E106(1)006(2)(3)(4) T409F226(1)006(2)(3)(4) T409G476(1)006(2)(3)(4) T409H686(1)006(2)(3)(4) CWR09D(3)155(1)(2)(5) CWR09D(3)335(1)(2)(5) CWR09D(3)475(1)(2)(5) CWR09D(3)685(1)(2)(5) CWR09D(3)106(1)(2)(5) CWR09D(3)226(1)(2)(5) CWR09D(3)476(1)(2)(5) CWR09D(3)686(1)(2)(5) 0.1 0.2 0.3 0.4 0.6 1.4 3.0 4.3 6.0 6.0 6.0 6.0 8.0 8.0 10.0 10.0 8.0 8.0 5.5 4.5 3.5 2.2 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 10 10 10 10 10 10 10 10 1 2.2 3.3 4.7 6.8 15 33 47 A/1005 B/1505 C/2005 D/1510 E/2010 F/2214 G/2711 H/2915 T409A105(1)010(2)(3)(4) T409B225(1)010(2)(3)(4) T409C335(1)010(2)(3)(4) T409D475(1)010(2)(3)(4) T409E685(1)010(2)(3)(4) T409F156(1)010(2)(3)(4) T409G336(1)010(2)(3)(4) T409H476(1)010(2)(3)(4) CWR09F(3)105(1)(2)(5) CWR09F(3)225(1)(2)(5) CWR09F(3)335(1)(2)(5) CWR09F(3)475(1)(2)(5) CWR09F(3)685(1)(2)(5) CWR09F(3)156(1)(2)(5) CWR09F(3)336(1)(2)(5) CWR09F(3)476(1)(2)(5) 0.1 0.2 0.3 0.5 0.7 1.5 3.3 4.7 6.0 6.0 6.0 6.0 6.0 8.0 10.0 10.0 10.0 8.0 5.5 4.5 3.5 2.5 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 15 15 15 15 15 15 15 15 0.68 1.5 2.2 3.3 4.7 10 22 33 A/1005 B/1505 C/2005 D/1510 E/2010 F/2214 G/2711 H/2915 T409A684(1)015(2)(3)(4) T409B155(1)015(2)(3)(4) T409C225(1)015(2)(3)(4) T409D335(1)015(2)(3)(4) T409E475(1)015(2)(3)(4) T409F106(1)015(2)(3)(4) T409G226(1)015(2)(3)(4) T409H336(1)015(2)(3)(4) CWR09H(3)684(1)(2)(5) CWR09H(3)155(1)(2)(5) CWR09H(3)225(1)(2)(5) CWR09H(3)335(1)(2)(5) CWR09H(3)475(1)(2)(5) CWR09H(3)106(1)(2)(5) CWR09H(3)226(1)(2)(5) CWR09H(3)336(1)(2)(5) 0.1 0.2 0.3 0.5 0.7 1.5 3.3 5.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 12.0 8.0 5.5 5.0 4.0 2.5 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 20 20 20 20 20 20 20 20 20 0.47 0.68 1 1.5 2.2 3.3 6.8 15 22 A/1005 B/1505 B/1505 C/2005 D/1510 E/2010 F/2214 G/2711 H/2915 T409A474(1)020(2)(3)(4) T409B684(1)020(2)(3)(4) T409B105(1)020(2)(3)(4) T409C155(1)020(2)(3)(4) T409D225(1)020(2)(3)(4) T409E335(1)020(2)(3)(4) T409F685(1)020(2)(3)(4) T409G156(1)020(2)(3)(4) T409H226(1)020(2)(3)(4) CWR09J(3)474(1)(2)(5) CWR09J(3)684(1)(2)(5) CWR09J(3)105(1)(2)(5) CWR09J(3)155(1)(2)(5) CWR09J(3)225(1)(2)(5) CWR09J(3)335(1)(2)(5) CWR09J(3)685(1)(2)(5) CWR09J(3)156(1)(2)(5) CWR09J(3)226(1)(2)(5) 0.1 0.1 0.2 0.3 0.4 0.7 1.4 3.0 4.4 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 14.0 10.0 12.0 6.0 5.0 4.0 2.4 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 25 25 25 VDC 85C 0.33 0.68 1 F 120Hz A/1005 B/1505 C/2005 KEMET/EIA T409A334(1)025(2)(3)(4) T409B684(1)025(2)(3)(4) T409C105(1)025(2)(3)(4) (see below for part options) CWR09K(3)334(1)(2)(5) CWR09K(3)684(1)(2)(5) CWR09K(3)105(1)(2)(5) (See below for part options) 0.1 0.2 0.3 max/5min Amps +20C 6.0 6.0 6.0 % Max +20C 120Hz 15.0 7.5 6.5 Ohms +20C 100kHz 1.0 1.0 1.0 J-STD-020D Temp260C Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity (1) To complete KEMET/CWR part number, insert M for 20%, K for 10%, or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/CWR part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs), D (0.001%/1000Hrs) or A = N/A. Designates Reliability Level. (3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish. (4) To complete KEMET part number, insert 4250 = +25C after Weibull, 4251 = -55C +85C after Weibull, or 4252 = -55C +85C before Weibull. Designates Surge current option. (5) To complete CWR part number, insert A = +25C after Weibull, B = -55C +85C after Weibull, or C = -55C +85C before Weibull. Designates Surge current option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. TC105-1 * 5/19/2011 13 Tantalum Surface Mount Capacitors - MIL-PRF (CWR Series) Table 1 - T409 Series CWR09 Style MIL-PRF 55365/4, Ratings & Part Number Reference con't Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity 85C VDC 25 25 25 25 25 25 120Hz F 1.5 2.2 4.7 6.8 10 15 KEMET/EIA D/1510 E/2010 F/2214 G/2711 G/2711 H/2915 (See below for part options) T409D155(1)025(2)(3)(4) T409E225(1)025(2)(3)(4) T409F475(1)025(2)(3)(4) T409G685(1)025(2)(3)(4) T409G106(1)025(2)(3)(4) T409H156(1)025(2)(3)(4) (See below for part options) CWR09K(3)155(1)(2)(5) CWR09K(3)225(1)(2)(5) CWR09K(3)475(1)(2)(5) CWR09K(3)685(1)(2)(5) CWR09K(3)106(1)(2)(5) CWR09K(3)156(1)(2)(5) Amps +20C max/5min 0.4 0.6 1.2 1.7 2.5 3.8 +20C 120Hz % Max 6.0 6.0 6.0 6.0 6.0 6.0 +20C 100kHz Ohms 6.5 3.5 2.5 1.2 1.4 1.0 Temp260C J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 35 35 35 35 35 35 35 35 0.22 0.47 0.68 1 1.5 3.3 4.7 6.8 A/1005 B/1505 C/2005 D/1510 E/2010 F/2214 G/2711 H/2915 T409A224(1)035(2)(3)(4) T409B474(1)035(2)(3)(4) T409C684(1)035(2)(3)(4) T409D105(1)035(2)(3)(4) T409E155(1)035(2)(3)(4) T409F335(1)035(2)(3)(4) T409G475(1)035(2)(3)(4) T409H685(1)035(2)(3)(4) CWR09M(3)224(1)(2)(5) CWR09M(3)474(1)(2)(5) CWR09M(3)684(1)(2)(5) CWR09M(3)105(1)(2)(5) CWR09M(3)155(1)(2)(5) CWR09M(3)335(1)(2)(5) CWR09M(3)475(1)(2)(5) CWR09M(3)685(1)(2)(5) 0.1 0.2 0.2 0.4 0.5 1.2 1.6 2.4 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 18.0 10.0 8.0 6.5 4.5 2.5 1.5 1.3 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50 50 50 50 50 50 50 50 50 50 50 VDC 85C 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 F 120Hz A/1005 A/1005 B/1505 B/1505 C/2005 D/1510 E/2010 F/2214 F/2214 G/2711 H/2915 KEMET/EIA T409A104(1)050(2)(3)(4) T409A154(1)050(2)(3)(4) T409B224(1)050(2)(3)(4) T409B334(1)050(2)(3)(4) T409C474(1)050(2)(3)(4) T409D684(1)050(2)(3)(4) T409E105(1)050(2)(3)(4) T409F155(1)050(2)(3)(4) T409F225(1)050(2)(3)(4) T409G335(1)050(2)(3)(4) T409H475(1)050(2)(3)(4) (see below for part options) CWR09N(3)104(1)(2)(5) CWR09N(3)154(1)(2)(5) CWR09N(3)224(1)(2)(5) CWR09N(3)334(1)(2)(5) CWR09N(3)474(1)(2)(5) CWR09N(3)684(1)(2)(5) CWR09N(3)105(1)(2)(5) CWR09N(3)155(1)(2)(5) CWR09N(3)225(1)(2)(5) CWR09N(3)335(1)(2)(5) CWR09N(3)475(1)(2)(5) (See below for part options) 0.1 0.1 0.1 0.2 0.2 0.3 0.5 0.8 1.1 1.7 2.4 max/5min Amps +20C 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % Max +20C 120Hz 22.0 17.0 14.0 12.0 8.0 7.0 6.0 4.0 2.5 2.0 1.5 Ohms +20C 100kHz 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 J-STD-020D Temp260C Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number MIL-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity (1) To complete KEMET/CWR part number, insert M for 20%, K for 10%, or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/CWR part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs), D (0.001%/1000Hrs) or A = N/A. Designates Reliability Level. (3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish. (4) To complete KEMET part number, insert 4250 = +25C after Weibull, 4251 = -55C +85C after Weibull, or 4252 = -55C +85C before Weibull. Designates Surge current option. (5) To complete CWR part number, insert A = +25C after Weibull, B = -55C +85C after Weibull, or C = -55C +85C before Weibull. Designates Surge current option. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. TC105-1 * 5/19/2011 14 Tantalum (CWR MIL-PRF Surface Style) Mount Established CapacitorsReliability - MIL-PRF - T409 (CWR Series Series) CWR09 Style MIL-PRF-55365/4 Recommended Voltage Derating Guidelines 120% % Working Voltage 100% 80% % Change in Working DC Voltage with Temperature 60% 40% Recommended Maximum Application Voltage (As % of Rated Voltage) 20% 0% 67% -55 25 33% 85 Temperature (C) 125 Ripple Current/Ripple Voltage Case Code KEMET A B C D E EIA 1005 1505 2005 1510 2010 F G H 2214 2711 2915 Maximum Power Dissipation (Pmax) mWatts @ 25C w/+20C Rise 50 70 75 80 90 100 125 150 Temperature Compensation Multipliers for Maximum Power Dissipation 25C 85C 1.00 0.90 T= Environmental Temperature 125C 0.40 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = P max*R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation(watts) R = ESR at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com TC105-1 ** 5/19/2011 T2001-1 5/19/2011 157 Tantalum (CWR MIL-PRF Surface Style) Mount Established CapacitorsReliability - MIL-PRF - T409 (CWR Series Series) CWR09 Style MIL-PRF-55365/4 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2 A 1005 1.45 2.15 1.20 5.60 2.70 1.35 1.85 1.05 4.50 2.20 1.25 1.55 0.90 3.60 1.90 B 1505 1.45 2.30 1.75 6.80 2.70 1.35 1.90 1.65 5.70 2.20 1.25 1.55 1.55 4.90 1.92 C 2005 1.45 2.30 2.40 8.10 2.70 1.35 1.90 2.30 7.00 2.20 1.25 1.55 2.15 6.10 1.90 D 1510 2.60 2.30 1.75 6.80 4.00 2.45 1.90 1.65 5.70 3.50 2.35 1.55 1.55 4.90 3.20 E 2010 2.60 2.30 2.40 8.10 4.00 2.45 1.90 2.30 7.00 3.50 2.35 1.55 2.15 6.10 3.20 F 2214 3.50 2.30 2.65 8.60 4.90 3.35 1.90 2.55 7.50 4.40 3.25 1.55 2.45 6.70 4.10 G 2711 2.85 2.80 2.95 9.70 4.20 2.75 2.40 2.85 8.60 3.70 2.65 2.05 2.75 7.80 3.40 H 2915 3.85 2.80 3.20 10.20 5.20 3.75 2.40 3.10 9.10 4.70 3.65 2.05 3.00 8.30 4.40 Density Level A: For low-density Product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). 1 Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com TC105-1 ** 5/19/2011 T2001-1 5/19/2011 168 Tantalum (CWR MIL-PRF Surface Style) Mount Established CapacitorsReliability - MIL-PRF - T409 (CWR Series Series) CWR09 Style MIL-PRF-55365/4 Soldering Process Note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurred, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and is not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Min (TSmin) 100C 150C Temperature Max (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60-120 sec 60-120 sec Ramp-up Rate (TL to TP) 3C/sec max 3C/sec max Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60-150 sec 220C* 235C** 60-150 sec 250C* 260C** Peak Temperature (TP) Time within 5C of Max Peak Temperature (tP) 20 sec max 30 sec max Ramp-down Rate (TP to TL) 6C/sec max 6C/sec max Time 25C to Peak Temperature 6 minutes max 8 minutes max Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z TP Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. TL tP Max Ramp Up Rate = 3 C/sec Max Ramp Down Rate = 6 C/sec tL Tsmax Tsmin 25 tS 25 C to Peak Time Construction MNO2 /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com TC105-1 ** 5/19/2011 T2001-1 5/19/2011 179 Tantalum (CWR MIL-PRF Surface Style) Mount Established CapacitorsReliability - MIL-PRF - T409 (CWR Series Series) CWR09 Style MIL-PRF-55365/4 Capacitor Marking KEMET CWR 09 Style Rated Voltage J 156 25 K 030 Polarity Indicator (+) Picofarad Code KEMET ID PWC* * 030 = 30th week of 2010 Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp, and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C, and maximum storage humidity not exceed 60% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com TC105-1 ** 5/19/2011 T2001-1 5/19/2011 18 10