Speed and accuracy for test optimization
– Small, compact size for bench and system use
– Fast, low-noise outputs
– Dual-range, precision low current measurement
– Built-in measurements and advanced
programmable features
– Protection features to ensure DUT safety
Data Sheet
Keysight Technologies
6610C Series Single-Output,
40-50 W GPIB Power Supplies
02 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet
This series of linear-regulated 40-50 W DC power supplies is designed to maximize the
throughput of DUTs through the manufacturing test process with fast programming and
measurement, and also active downprogramming. It offers many advanced programmable
features including stored states and status reporting. Programming is done using industry
standard SCPI commands via the GPIB or RS-232. Test system integration is further
simplified by using the VXIplug&play drivers. The optional relays simplify system design
and troubleshooting.
The half-rack size of the 6610C series makes it a convenient DC power supply for the
R&D lab bench. The built-in microamp measurement system helps the engineer to easily
and accurately monitor the output voltage and current without a complicated test setup.
03 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet
Supplemental Characteristics
(Non-warranted characteristics determined by design
and useful in applying the product)
6611C
6612C
6613C
6614C
6611C-J05
Special order
option
Average programming resolution
Voltage
Current
2 mV
1.25 mA
5 mV
0.5 mA
12.5 mV
0.25 mA
25 mV
0.125 mA
3 mV
1.25 mA
Sink current 3 A 1.2 A 0.6 A 0.3 A 3 A
Specifications
(at 0 ° to 55 ° unless otherwise specified) 6611C 6612C 6613C 6614C
6611C-J05
Special Order
Option
Number of outputs 1 1 1 1 1
GPIB Yes Yes Yes Yes Yes
Output ratings
Voltage
Current
0 to 8 V
0 to 5 A
0 to 20 V
0 to 2 A
0 to 50 V
0 to 1 A
0 to 100 V
0 to 0.5 A
0 to 10 V
0 to 5 A
Programming accuracy at 25 °C ± 5 °C
Voltage
Current 0.05% +
5 mV
2 mA
10 mV
1 mA
20 mV
0.75 mA
50 mV
0.5 mA
5 mV
2 mA
Ripple and noise
20 Hz to 20 MHz;with outputs ungrounded
or with either terminal grounded
Voltage rms
peak-to-peak
Normal mode rms
0.5 mV
3 mV
2 mA
0.5 mV
3 mV
1 mA
0.5 mV
4 mV
1 mA
0.5 mV
5 mV
1 mA
0.5 mV
3 mV
2 mA
DC measurement accuracy
via GPIB or front-panel meters with respect
to actual output at 25 °C ± 5 °C
Voltage 0.03% +
Low current range
–20 mA to + 20 mA 0.1% +
High current range
+20 mA to + rated I 0.2% +
–20 mA to – rated I 0.2% +
2 mV
2.5 µA
0.5 mA
1.1 mA
3 mV
2.5 µA
0.25 mA
0.85 mA
6 mV
2.5 µA
0.2 mA
0.8 mA
1
2 mV
2.5 µA
0.1 mA
0.7 mA
2 mV
2.5 µA
0.5 mA
1.1 mA
Load regulation
Voltage
Current
2 mV
1 mA
2.5 mV
0.5 mA
1 mV
2 mA
2.5 mV
1 mA
2 mV
1 mA
Line regulation
Voltage
Current
0.5 mV
0.5 mA
0.5 mV
0.5 mA
1 mV
0.25 mA
1 mV
0.25 mA
0.5 mV
0.5 mA
Transient response time
Less than 100 µs for the output to recover to its previous level (within 0.1% of the voltage rating of the supply or 20 mV, whichever is greater) following any step
change in load current of up to 50% of the output current rating of the supply
04 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet
Keysight Models: 6611C, 6612C, 6613C, 6614C, 6611C-J05
Top
Side
Rear
368.3 mm
14.5"
368.3 mm
14.5"
212.8 mm
8.4"
88.1 mm
3.5"
Supplemental characteristics
for all model numbers
DC floating voltage: Output terminals can be floated up to ± 240
VDC maximum from chassis ground
Remote sensing: Up to two volts dropped in each load lead. Add 2
mV to the voltage load regulation specification for each one volt
change in the positive output lead due to load current change.
Command processing time: Average time required for the output
voltage to begin to change following receipt of digital date is 4 ms
for the power supplies connected directly to the GPIB.
Output programming response time: The rise and fall time
(10/90% and 90/10%) of the output voltage is less than 2 ms.
The output voltage change settles within 1 LSB (0.025% x rated
voltage) of final value in less than 6 ms.
GPIB interface capabilities: IEEE-488.2, SCPI command set, and
6610A/B Series programming compatibility
Input power: (full load): 1.6 A, 100 W (6611C: 2.2 A, 120 W)
Regulatory compliance: Complies with EMC directive 89/336/EEC
(ISM 1B).
Software driver: VXIplug&play
Size: 212.8 mm W x 88.1 mm H x 368.3 mm D (8.4 in x 3.5 in x 14.5 in)
Weight: 8.2 kg (18.16 lb) net; 10.6 kg (23.5 lb) shipping
05 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet
Ordering information
Opt 100 87 to 106 VAC, 47 to 63 Hz
Opt 120 104 to 127 VAC, 47 to 63 Hz
Opt 220 191 to 233 VAC, 47 to 63 Hz
Opt 230 207 to 253 VAC, 47 to 63 Hz
Opt 760 Isolation and reversal relays
Opt 87J Removes feet for use in rack system
Opt 0L1 Full documentation on CD-ROM, and printed
standard documentation package. CD-ROM
includes User’s Guide, Programming Guide,
Service Manual and Quick Start Guide
Opt 0B3 Printed service manual
Accessories
p/n 1494-0015 Rack slide kit
E3663AC* Support rails for Keysight rack cabinets
1CM002A* Rack mount flange kit 88.1 mm H (2U), 1.5 inch
hole space for side by side mounting of two
units. Requires lock link kit (and support rails)
5061-9694 Lock link kit
1CM024A* Rack mount flange kit 88.1 mm H (2U), one
bracket, one half-module bracket, and filler
panel
Application notes
10 Practical Tips You Need to Know About Your Power
Products, 5965-8239E
10 Hints for Using Your Power Supply to Decrease Test
Time, 5968-6359E
Understanding Linear Power Supply Operation (AN1554),
5989-2291EN
*Support rails required
06 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet
This information is subject to change without notice.
© Keysight Technologies, 2012 - 2014
Published in USA, August 2, 2014
5990-9301EN
www.keysight.com
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to five years of protection and no budgetary surprises to ensure your
instruments are operating to specification so you can rely on accurate
measurements.
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada (877) 894 4414
Brazil 55 11 3351 7010
Mexico 001 800 254 2440
United States (800) 829 4444
Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
India 1 800 112 929
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan 0800 047 866
Other AP Countries (65) 6375 8100
Europe & Middle East
Austria 0800 001122
Belgium 0800 58580
Finland 0800 523252
France 0805 980333
Germany 0800 6270999
Ireland 1800 832700
Israel 1 809 343051
Italy 800 599100
Luxembourg +32 800 58580
Netherlands 0800 0233200
Russia 8800 5009286
Spain 800 000154
Sweden 0200 882255
Switzerland 0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
United Kingdom 0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-09-23-14)
www.keysight.com/find/6610
