Keysight Technologies 6610C Series Single-Output, 40-50 W GPIB Power Supplies Speed and accuracy for test optimization - - - - Small, compact size for bench and system use Fast, low-noise outputs Dual-range, precision low current measurement Built-in measurements and advanced programmable features - Protection features to ensure DUT safety Data Sheet 02 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet This series of linear-regulated 40-50 W DC power supplies is designed to maximize the throughput of DUTs through the manufacturing test process with fast programming and measurement, and also active downprogramming. It offers many advanced programmable features including stored states and status reporting. Programming is done using industry standard SCPI commands via the GPIB or RS-232. Test system integration is further simplified by using the VXIplug&play drivers. The optional relays simplify system design and troubleshooting. The half-rack size of the 6610C series makes it a convenient DC power supply for the R&D lab bench. The built-in microamp measurement system helps the engineer to easily and accurately monitor the output voltage and current without a complicated test setup. 03 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet Speciications Specifications (at 0 to 55 unless otherwise specified) 6611C 6612C 6613C 6614C 6611C-J05 Special Order Option Number of outputs 1 1 1 1 1 GPIB Yes Yes Yes Yes Yes Output ratings Voltage Current 0 to 8 V 0 to 5 A 0 to 20 V 0 to 2 A 0 to 50 V 0 to 1 A 0 to 100 V 0 to 0.5 A 0 to 10 V 0 to 5 A Programming accuracy at 25 C 5 C Voltage Current 0.05% + 5 mV 2 mA 10 mV 1 mA 20 mV 0.75 mA 50 mV 0.5 mA 5 mV 2 mA Ripple and noise 20 Hz to 20 MHz;with outputs ungrounded or with either terminal grounded Voltage rms peak-to-peak Normal mode rms 0.5 mV 3 mV 2 mA 0.5 mV 3 mV 1 mA 0.5 mV 4 mV 1 mA 0.5 mV 5 mV 1 mA 0.5 mV 3 mV 2 mA 2 mV 3 mV 6 mV 12 mV 2 mV 2.5 A 2.5 A 2.5 A 2.5 A 2.5 A 0.5 mA 1.1 mA 0.25 mA 0.85 mA 0.2 mA 0.8 mA 0.1 mA 0.7 mA 0.5 mA 1.1 mA Load regulation Voltage Current 2 mV 1 mA 2.5 mV 0.5 mA 1 mV 2 mA 2.5 mV 1 mA 2 mV 1 mA Line regulation Voltage Current 0.5 mV 0.5 mA 0.5 mV 0.5 mA 1 mV 0.25 mA 1 mV 0.25 mA 0.5 mV 0.5 mA DC measurement accuracy via GPIB or front-panel meters with respect to actual output at 25 C 5 C Voltage 0.03% + Low current range -20 mA to + 20 mA 0.1% + High current range +20 mA to + rated I 0.2% + -20 mA to - rated I 0.2% + Transient response time Less than 100 s for the output to recover to its previous level (within 0.1% of the voltage rating of the supply or 20 mV, whichever is greater) following any step change in load current of up to 50% of the output current rating of the supply 6611C 6612C 6613C 6614C 6611C-J05 Special order option Average programming resolution Voltage Current 2 mV 1.25 mA 5 mV 0.5 mA 12.5 mV 0.25 mA 25 mV 0.125 mA 3 mV 1.25 mA Sink current 3A 1.2 A 0.6 A 0.3 A 3A Supplemental Characteristics (Non-warranted characteristics determined by design and useful in applying the product) 04 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet Supplemental characteristics for all model numbers GPIB interface capabilities: IEEE-488.2, SCPI command set, and 6610A/B Series programming compatibility DC floating voltage: Output terminals can be floated up to 240 VDC maximum from chassis ground Input power: (full load): 1.6 A, 100 W (6611C: 2.2 A, 120 W) Remote sensing: Up to two volts dropped in each load lead. Add 2 mV to the voltage load regulation specification for each one volt change in the positive output lead due to load current change. Command processing time: Average time required for the output voltage to begin to change following receipt of digital date is 4 ms for the power supplies connected directly to the GPIB. Regulatory compliance: Complies with EMC directive 89/336/EEC (ISM 1B). Software driver: VXIplug&play Size: 212.8 mm W x 88.1 mm H x 368.3 mm D (8.4 in x 3.5 in x 14.5 in) Weight: 8.2 kg (18.16 lb) net; 10.6 kg (23.5 lb) shipping Output programming response time: The rise and fall time (10/90% and 90/10%) of the output voltage is less than 2 ms. The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 6 ms. Keysight Models: 6611C, 6612C, 6613C, 6614C, 6611C-J05 Top 368.3 mm 14.5" 212.8 mm 8.4" 88.1 mm 3.5" 368.3 mm 14.5" Side Rear 05 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet Ordering information Opt 100 Opt 120 Opt 220 Opt 230 Opt 760 Opt 87J 87 to 106 VAC, 47 to 63 Hz 104 to 127 VAC, 47 to 63 Hz 191 to 233 VAC, 47 to 63 Hz 207 to 253 VAC, 47 to 63 Hz Isolation and reversal relays Removes feet for use in rack system Opt 0L1 Full documentation on CD-ROM, and printed standard documentation package. CD-ROM includes User's Guide, Programming Guide, Service Manual and Quick Start Guide Printed service manual Opt 0B3 Accessories p/n 1494-0015 Rack slide kit E3663AC* Support rails for Keysight rack cabinets 1CM002A* Rack mount flange kit 88.1 mm H (2U), 1.5 inch hole space for side by side mounting of two units. Requires lock link kit (and support rails) 5061-9694 Lock link kit 1CM024A* Rack mount flange kit 88.1 mm H (2U), one bracket, one half-module bracket, and filler panel Application notes 10 Practical Tips You Need to Know About Your Power Products, 5965-8239E 10 Hints for Using Your Power Supply to Decrease Test Time, 5968-6359E Understanding Linear Power Supply Operation (AN1554), 5989-2291EN *Support rails required 06 | Keysight | 6610C Series Single-Output, 40-50 W GPIB Power Supplies - Data Sheet myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight's measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/6610 For more information on Keysight Technologies' products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Paciic Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-09-23-14) This information is subject to change without notice. (c) Keysight Technologies, 2012 - 2014 Published in USA, August 2, 2014 5990-9301EN www.keysight.com