ECO-PACTM 1 Single Phase Full Controlled PSBT 25 IdAV = 32 A VRRM Rectifier Bridge = 600-1200V Preliminary Data Sheet VRSM VRRM Type VDSM VDRM (V) (V) 700 600 PSBT 25/06 900 800 PSBT 25/08 1300 1200 PSBT 25/12 Symbol Test Conditions I*dAV ITRMS ITAVM ITSM TC = 85 C, i2 dt (di/dt)cr Maximum Ratings (per module) TVJ = TVJM 32 A - A 16 A TC = 85 C, 180 sine, per thyristor TVJ = 45 C t = 10 ms (50 Hz), sine 200 A VR = 0 t = 8.3 ms (60 Hz), sine 210 A TVJ = TVJM t = 10 ms 180 A VR = 0 t = 8.3 ms (60 Hz), sine 190 A TVJ = 45 C t = 10 ms (50 Hz), sine 200 As VR = 0 t = 8.3 ms (60 Hz), sine 150 As TVJ = TVJM t = 10 ms (50 Hz), sine 160 As VR = 0 t = 8.3 ms (60 Hz), sine 150 As TVJ = TVJM repetitive, IT = 20 A 100 A/s (50 Hz), sine f=50Hz, tP=200s VD=2/3VDRM IG=0.15 A non repetitive,IT = ITAVM 500 A/s 500 V/s diG/dt=0.15A/s (dv/dt)cr TVJ = TVJM VD=2/3VDRM RGK= , method 1 (linear voltage rise) PGM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = TVJM tP=30s 5 W IT = ITAVM tP=300s 2.5 W 0.5 W 10 V -40... + 125 125 C C -40... + 125 C 2500 V 50/60 Hz, RMS t = 1 min IISOL 1 mA Md Mounting torque Weight typ. t=1s (M4) 3000 V 1.5 - 1.8 14 - 16 16 Nm lb.in. g Features * * * * * Package with DCB ceramic base plate * UL registered, E 148688 Isolation voltage 3000 V Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications * * * * Supplies for DC power equipment Imput rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages * * * * * Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated *for resistive load at bridge output 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 Symbol Test Conditions ID,IR VT VTO rT VGT TVJ = TVJM, VR = VRRM, VD=VDRM IT = 20 A, IGT VGD IGD IL TVJ = 25 C Characteristic Value For power-loss calculations only (TVJ = TVJM) 5 mA 1.6 V 0.85 V 27 m TVJ = 25C 1.5 V TVJ =-40C 2.5 V TVJ = 25C 25 mA TVJ =-40C 50 mA TVJ= 125C VD=2/3VDRM 0.2 V TVJ= 125C VD=2/3VDRM 3 mA 75 mA TVJ= 25C, VD=6V, RGK= 50 mA TVJ= 25C, VD=1/2VDRM 2 s per thyristor; DC per module per thyristor; DC 1.3 0.33 1.8 K/W K/W K/W per module 0.45 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 5.0 50 mm mm m/s VD = 6V VD = 6V TVJ= 25C, tP=10s IG=0.1A, diG/dt=0.1A/s IH tgd IG=0.1A, diG/dt=0.1A/s RthJC RthJK ds dA a Package style and outline Dimensions in mm (1mm = 0.0394") 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20