C4D02120A VRRM = 1200 V Silicon Carbide Schottky Diode IF (TC=135C) = 5 A Z-Rec Rectifier (R) Qc Features * * * * * 11 nC Package 1.2kV Schottky Rectifier Zero Reverse Recovery Current High-Frequency Operation Temperature-Independent Switching Extremely Fast Switching Benefits * * * * * = TO-220-2 Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 CASE PIN 2 Applications * * * Switch Mode Power Supplies Power Factor Correction Motor Drives Part Number Package Marking C4D02120A TO-220-2 C4D02120 Maximum Ratings (TC=25C unless otherwise specified) Symbol Parameter Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 1200 V VRSM Surge Peak Reverse Voltage 1300 V VR DC Peak Reverse Voltage 1200 V IF Continuous Forward Current 10 5 2 A TC=25C TC=135C TC=165C IFRM Repetitive Peak Forward Surge Current 13 8.4 A TC=25C, tP=10 ms, Half Sine Pulse TC=110C, tP=10 ms, Half Sine Pulse IFSM Non-Repetitive Forward Surge Current 19 16.5 A TC=25C, tP=10 ms, Half Sine Pulse TC=110C, tP=10 ms, Half Sine Pulse IF,Max Non-Repetitive Peak Forward Current 200 160 A TC=25C, tP=10 ms, Pulse TC=110C, tP=10 ms, Pulse 60 26 W TC=25C TC=110C Ptot Power Dissipation TJ Operating Junction Range -55 to +175 C Tstg Storage Temperature Range -55 to +135 C 1 8.8 Nm lbf-in TO-220 Mounting Torque 1 Value C4D02120A Rev. C M3 Screw 6-32 Screw Note Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.4 1.9 1.8 3 V IF = 2 A TJ=25C IF = 2 A TJ=175C IR Reverse Current 10 40 50 150 A VR = 1200 V TJ=25C VR = 1200 V TJ=175C QC Total Capacitive Charge 11 nC VR = 800 V, IF = 2A di/dt = 200 A/s TJ = 25C C Total Capacitance 167 11 8 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz VR = 800 V, TJ = 25C, f = 1 MHz Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. RJC Thermal Resistance from Junction to Case 2.5 Max. Unit Test Conditions Note C/W Typical Performance 4 1 3 IR (mA) IR Reverse Current (mA) IF (A) Current (A) IF Forward 0.9 TJ=-55C TJ= 25C TJ= 75C TJ =125C TJ =175C 3.5 2.5 2 1.5 1 0.7 0.6 0.5 0.4 0.2 0.1 0 0 0.5 1 1.5 2 2.5 VF (V) VF Forward Voltage Figure 1. Forward Characteristics C4D02120A Rev. C 3 3.5 TJ=-55C TJ= 25C TJ= 75C TJ =125C TJ =175C 0.3 0.5 0 2 0.8 0 500 1000 1500 VR (V) VR Reverse Voltage (V) Figure 2. Reverse Characteristics Typical Performance 35 35 70 70.0 30 30 60 60.0 IF(peak) (A) 20 20 Duty Duty Duty Duty Duty 15 15 50 50.0 40 40.0 PTot (W) 10% 20% 30% 50% 70% DC 25 25 30 30.0 10 10 20 20.0 55 10 10.0 00 25 50 75 100 125 150 175 25 50 75 100 125 150 175 0.00 25 50 75 100 125 150 175 25 TC (C) 50 75 100 TC (C) 125 150 175 Figure 4. Power Derating Figure 3. Current Derating 14 14 180 180 12 12 160 160 140 140 120 120 88 100 100 C (pF) Qrr (nC) QC Capacitive Charge (nC) 10 10 66 44 80 80 60 60 40 40 22 20 20 00 0 200 400 600 800 1000 0 200 400 600 800 1000 VR Reverse Voltage (V) VR (V) Figure 5. Recovery Charge vs. Reverse Voltage 3 C4D02120A Rev. C 0 0 0.1 1 10 100 1000 0.1 1 10 100 VR (V) Figure 6. Capacitance vs. Reverse Voltage 1000 Typical Performance 6.06 1000 1000 4.04 (A) IFSMIFSM (A) E (mJ) C EC Capacitive Energy (uJ) 5.05 3.03 2.02 100 100 TJ = 25C TJ = 110C 1.01 0.00 0 200 400 600 800 1000 0 200 400 600 800 1000 10 10 1E-05 1E-04 1E-03 1E-02 1.E-05 1.E-04 1.E-03 1.E-02 tptp(s) (s) VR Reverse Voltage (V) V (V) R Figure 7. Typical Capacitance Stored Energy Figure 8. Non-repetitive peak forward surge current versus pulse duration (sinusoidal waveform) 0.5 Thermal Resistance (C/W) 1 0.3 0.1 0.05 100E-3 0.02 SinglePulse 0.01 10E-3 1E-3 1E-6 10E-6 100E-6 1E-3 T (Sec) 10E-3 Figure 9. Transient Thermal Impedance 4 C4D02120A Rev. C 100E-3 1 Package Dimensions A Q X Y 1 2 G T Z Min Max A .381 .410 9.677 10.414 B .235 .255 5.969 6.477 A E B S E Max D B D U H L M PIN 1 PIN 2 W N CASE Inc hes .100 .120M illim eters 2.540 M in M ax M in M ax .223 .337 5.664 .395 .410 10.033 10.414 .590 .255 .615 14.986 .235 5.969 6.477 F C .143 .102 G D E H F J G L H .337 8.560 1.105 .337 1.147 .590 .610 14.986 .500 .550 .149 .153 3.785 R 0.197 1.127 1.147 28.626 .025 .550 .036 .530 13.462 M J N L R 0.010 .045 .028 .195 .036 .045 .055 .165 .195 .205 .048 .180 .170 P V Millimeters Min C P OS P F J C Inches POS Package TO-220-2 M N Q P S Q .0483 T S T U U V V W W 33 3 3 3 .094 .100 .014 .014 X X Y Y 33 .395 .385 z Z .130 .130 .112 .054 .153 2.591 61.219 6 3 5 3 6 5 3 .110 .110 2.54 .021 .025 .356 .410 .150 5.53 10.033 .410 3.302 .150 3.886 1.397 5.207 4.699 1.372 3 1.371 6 5 3 5 3 5 2.388 2.794 .356 .533 6 5 3 10.414 9.779 3.810 3.302 6 2.794 .635 5.5 10.414 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish Recommended Solder Pad Layout TO-220-2 Part Number Package Marking C4D02120A TO-220-2 C4D02120 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering 5 8.560 15.621 8.560 28.067 29.134 15.494 12.700 13.970 3.886 R 0.197 29.134 .635 .914 13.970 .055 R 0.2541.143 .711 .914 .205 4.953 1.143 1.397 .185 4.191 4.953 5.207 .054 1.219 4.318 4.572 5 5 3.632 2.845 3.048 C4D02120A Rev. C Diode Model Diode Model CSD04060 VfVTfT== VTV+T+If*R If*RT T -3 -3 V VTT==0.965 + (Tj * -1.3*10 ) 0.9592+(T J* -1.20*10 ) -3 -3 RTT==0.096 + (Tj * 1.06*10 ) 0.1673+(T J* 2.10*10 ) Note: TJ = Diode Junction Temperature In Degrees Celsius VT RT Notes * RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. * REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. * This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Copyright (c) 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C4D02120A Rev. C Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: C4D02120A