TPL0401A TPL0401B TPL0401C www.ti.com SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 128 TAPS Single Channel Digital Potentiometer with I2C Interface Check for Samples: TPL0401A, TPL0401B, TPL0401C FEATURES 1 * * * The TPL0401A/B have the Low Terminal internal and connected to GND. The TPL0401C has the High Terminal internal and floating. SC-70 DCK PACKAGE (TOP VIEW) APPLICATIONS * * * Low Power DDR3 Voltage Reference Adjustable Power Supplies Adjustable Gain Amplifiers and Offset Trimming Precision Calibration of Set Point Thresholds Sensor Trimming and Calibration Mechanical Potentiometer Replacement * * * VDD 1 6 H GND 2 5 W SCL 3 4 SDA L TPL0401A/B VDD 1 GND 2 SCL 6 L 5 W H 4 SDA W * The TPL0401 is a single channel, linear-taper digital potentiometer with 128 wiper positions. The TPL0401A/B have the low terminal internal and connected to GND. The position of the wiper can be adjusted using an I2C interface. The TPL0401 is available in a 6-pin SC-70 package with a specified temperature range of -40C to 125C. The part has a 10k end-to-end resistance and can operate with a supply voltage range of 2.7V to 5.5V. This kind of product is widely used in setting the voltage reference for low power DDR3 memory. IE * DESCRIPTION EV Single Channel, 128-Position Resolution 10 k End-to-End Resistance Options Low Temperature Coefficient: 35 ppm/C I2C Serial Interface 2.7 V to 5.5 V Single-Supply Operation 20% Resistance Tolerance 'A' and 'B' Versions Have Different I2C Addresses 'L' Terminal of 'A' and 'B' version is internal and connected To GND `H' Terminal of `C' Version is Internal and Floating Operating Temperature -40C to 125C Available in Industry Standard SC70 Packages ESD Performance Tested per JESD 22 - 2000 V Human Body Model (A114-B, Class II) PR * * * * * * * 3 TPL0401C ORDERING INFORMATION TA -40C to 125C (1) PACKAGE (1) SC70 - DCK Tape and Reel ORDERABLE PART NUMBER END-TO-END RESISTANCE I2C ADDRESS TOP-SIDE MARKING TPL0401A-10DCKR 10-k 0101110 7TV TPL0401B-10DCKR 10-k 0111110 7UV TPL0401C-50DCKR 50-k 0101110 TBD Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2011-2012, Texas Instruments Incorporated TPL0401A TPL0401B TPL0401C SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. PIN FUNCTIONS PIN NUMBER PIN NAME TYPE DESCRIPTION 1 VDD Power Positive Supply Voltage 2 GND Ground Ground 3 SCL Input I2C Clock 4 SDA I/O I2C Data 5 W I/O Wiper terminal 6 H I/O High terminal - L I/O Low terminal FUNCTIONAL BLOCK DIAGRAM H VDD TPL0401A/B SCL WIPER REGISTER I 2C INTERFACE SDA W GND L VDD TPL0401C SCL WIPER REGISTER I 2C INTERFACE SDA W H GND 2 Submit Documentation Feedback Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C TPL0401A TPL0401B TPL0401C www.ti.com SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 DIGITAL POTENTIOMETER CONFIGURATIONS VOLTAGE DIVIDER MODE VH VHW VHW = (VH - VL) x (1 - (D/128)) W VH - VL VWL VWL = (VH - VL) x D/128 Where D = Decimal Value of Wiper Code VL RHEOSTAT MODE A H H (Floating) RTOT W RWL = RTOT x D/128 OR RTOT W Where D = Decimal Value of Wiper Code RWL RWL L L RHEOSTAT MODE B H H RHW RTOT RHW W OR RTOT L RHW = RTOT x (1 - (D/128)) W Where D = Decimal Value of Wiper Code L (Floating) Figure 1. DPOT Configurations Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C Submit Documentation Feedback 3 TPL0401A TPL0401B TPL0401C SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 www.ti.com ABSOLUTE MAXIMUM RATINGS (1) (2) (3) over operating free-air temperature range (unless otherwise noted) VDD to GND All other pins to GND Supply voltage range IH IL IW Pulse current VI Digital input voltage range -0.3 7 V -0.3 VDD+0.3 V TPL0401C-50 Package thermal impedance Tstg Storage temperature range (2) (3) (4) MAX -0.3 (4) UNIT 20 mA 5 mA 1.3 mA TPL0401A/B-10 Continuous current JA (1) MIN VDD+ 0.3 DCK package -65 V 259 C/W 150 C Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All voltages are with respect to ground, unless otherwise specified. The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS DESCRIPTION MIN MAX Unit VDD Supply Voltage 2.7 5.5 V VW,VH Terminal Voltage 0 VDD V VIH Voltage Input High ( SCLK, SDA ) 0.7 VDD VIL Voltage Input Low ( SCLK, SDA) 0.3 VDD V IW Wiper Current 2 mA TA Ambient Operating temperature 128 C 4 Submit Documentation Feedback V -40 Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C TPL0401A TPL0401B TPL0401C www.ti.com SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 ANALOG SPECIFICATIONS Typical values are specified at 25oC and Vdd=3.3V PARAMETER CONDITIONS RTOTAL End-to-end resistance (between H TPL0401A/B-10 and L terminals) TPL0401C-50 VH Terminal voltage range RH Terminal resistance RW CH MIN TYP MAX 8 10 12 k 40 50 60 k VDD V 35 100 Wiper resistance 35 100 Terminal capacitance 10 pF CW Wiper capacitance 11 pF ILKG Terminal leakage current TCR 0 UNIT 0.1 Resistance temperature coefficient TPL0401A/B-10 TPL0401C-50 1 A 22 ppm/C TBD ppm/C VOLTAGE DIVIDER MODE (TPL0401A, TPL0401B, VH = VDD, VW = Not Loaded) INL Integral non-linearity DNL Differential non-linearity ZSERROR Zero-scale error FSERROR Full-scale error TCV Ratiometric temperature coefficient Wiper set at mid-scale 4 BW Bandwidth Wiper set at mid-scale, , CLOAD = 10 pF 2862 kHz TSW Wiper settling time 0.152 S THD Total harmonic distortion VH = 1 VRMS at 1 kHz, VL = VDD/2, Measurement at W -0.5 0.5 LSB -0.25 0.25 LSB 0 0.75 1.5 LSB -1.5 -0.75 0 LSB ppm/C 0.03 % RHEOSTAT MODE (TPL0401C) RINL Integral non-linearity TBD LSB RDNL Differential non-linearity TBD LSB ROFFSET Offset TBD LSB RBW Bandwidth TBD kHz Code=0x00h, L Floating, Input applied to W, 10pF on H Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C Submit Documentation Feedback 5 TPL0401A TPL0401B TPL0401C SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 www.ti.com OPERATING SPECIFICATIONS Typical values are specified at 25oC and Vdd=3.3V (1) PARAMETER IDD(STBY) VDD Standby current IIN-DIG Digital Pins Leakage Current (SCL, SDA Inputs) CONDITION S MIN TYP MAX UNIT -40 to 85oC 0.5 uA -40 to 125oC 1.5 uA 1 uA 0.7 x VDD 5.5 V 0 0.3 x VDD V 0.4 V -1 SERIAL INTERFACE SPECS (SDA, SCL) VIH Input high voltage VIL Input low voltage VOL Output low voltage SDA Pin, IOL = 4 mA CIN Pin capacitance SCL, SDA Inputs 7 pF 2 I C INTERFACE TIMING REQUIREMENTS STANDARD MODE I2C BUS I2C Clock frequency fSCL 2 tSCH I C Clock high time tSCL I2C Clock low time tsp I2C Spike time tSDS I C Serial data setup time tSDH I2C Serial data hold time tICR I2C Input rise time UNITS MIN MAX MIN MAX 0 100 0 400 4 0.6 4.7 1.3 0 2 FAST MODE I2C BUS 50 0 250 100 0 0 2 kHz s s 50 ns ns ns 1000 20 + 0.1Cb 300 ns ns tICF I C Input fall time 300 20 + 0.1Cb 300 tICF I2C Output fall time, 10 pF to 400 pF bus 300 20 + 0.1Cb 300 tBUF I2C Bus free time between stop and start 4.7 1.3 s tSTS I2C Start or repeater start condition setup time 4.7 1.3 s s 2 ns tSTH I C Start or repeater start condition hold time 4 0.6 tSPS I2C Stop condition setup time 4 0.6 tVD(DATA) Valid data time, SCL low to SDA output valid 1 1 s tVD(DATA) Valid data time of ACK condition, ACK signal from SCL low to SDA (out) low 1 1 s (1) 6 s Parameters with Min and Max limits are 100% tested at +25C, unless otherwise specified. Temperature limits established by characterization and are not production tested Submit Documentation Feedback Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C TPL0401A TPL0401B TPL0401C www.ti.com SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 TYPICAL CHARACTERISTICS INL vs TAP POSITION (Potentiometer Mode) DNL vs TAP POSITION (Potentiometer Mode) 0.15 0.15 5.5V 5.5V 3.3V 3.3V 2.7V 0.10 0.05 0.05 DNL Error (LSB) INL Error (LSB) 2.7V 0.10 0.00 0.00 -0.05 -0.05 -0.10 -0.10 -0.15 -0.15 0 18 36 54 72 90 108 126 0 18 36 54 72 90 108 Digital Code Digital Code Figure 2. Figure 3. INL vs TAP POSITION (Rheostat Mode) DNL vs TAP POSITION (Rheostat Mode) 126 0.15 1.00 5.5V 5.5V 3.3V 3.3V 2.7V 2.7V 0.10 RDNL Error (LSB) RINL Error (LSB) 0.50 0.00 0.05 0.00 -0.05 -0.50 -0.10 -1.00 -0.15 0 16 32 48 64 80 96 112 0 128 16 32 48 64 80 96 Digital Code Digital Code Figure 4. Figure 5. ZERO SCALE ERROR vs TEMPERATURE FULL SCALE ERROR vs TEMPERATURE 1.00 112 0.00 5.5V 5.5V 3.3V 0.90 3.3V -0.10 2.7V 2.7V 0.80 -0.20 0.70 -0.30 FS Error (LSB) ZS Error (LSB) 128 0.60 0.50 0.40 -0.40 -0.50 -0.60 0.30 -0.70 0.20 -0.80 0.10 -0.90 0.00 -1.00 -40 -20 0 20 40 60 80 100 120 -40 -20 0 Temperature (C) 20 40 60 80 100 120 Temperature (C) Figure 6. Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C Figure 7. Submit Documentation Feedback 7 TPL0401A TPL0401B TPL0401C SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 www.ti.com TYPICAL CHARACTERISTICS (continued) END-TO-END RTOTAL% CHANGE vs TEMPERATURE TEMPERATURE COEFFICIENT vs TAP POSITION (Potentiometer Mode) 300.00 1.00 5.5V 5.5V 270.00 3.3V 3.3V 2.7V 2.7V 0.50 210.00 TC (ppm/C) Resistance Change (%) 240.00 0.00 180.00 150.00 120.00 90.00 -0.50 60.00 30.00 0.00 -1.00 -40 -10 20 50 80 0 110 16 32 Temperature (C) 48 64 80 96 112 128 Digital Code Figure 8. Figure 9. TEMPERATURE COEFFICIENT vs TAP POSITION (Rheostat Mode) FREQUENCY RESPONSE Code 40 Code 20 300.00 0.00 Code 10 5.5V 270.00 3.3V -6.00 Code 08 240.00 -12.00 210.00 -18.00 Magnitude (dB) TC (ppm/C) 2.7V 180.00 150.00 120.00 -24.00 -30.00 -36.00 90.00 -42.00 60.00 -48.00 30.00 -54.00 0.00 0 16 32 48 64 80 96 112 128 -60.00 1.00E+03 1.00E+04 Digital Code Figure 10. 8 Submit Documentation Feedback 1.00E+05 1.00E+06 1.00E+07 Frequency (Hz) Figure 11. Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C TPL0401A TPL0401B TPL0401C www.ti.com SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 SLAVE ADDRESS TPL0401A, TPL0401C BIT 7 (MSB) 0 BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 1 0 1 1 1 0 BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 1 1 1 1 1 0 BIT 0 (LSB) R/W TPL0401B BIT 7 (MSB) 0 BIT 0 (LSB) R/W WRITE AND READ PROTOCOL From Processor to DPOT From DPOT to Processor I2C Write to A Register Start Address (01_1110) Data Ack 0 Ack Command (00000000) Ack Stop I2C Read From A Register Start Address (01_1110) 0 Ack Command (00000000) Ack reStart Address (01_1110) 1 Ack Data Byte noAck Stop Standard I2C Interface Details The bidirectional I2C bus consists of the serial clock (SCL) and serial data (SDA) lines. Both lines must be connected to a positive supply via a pullup resistor when connected to the output stages of a device. Data transfer may be initiated only when the bus is not busy. I2C communication with this device is initiated by the master sending a start condition, a high-to-low transition on the SDA input/output while the SCL input is high (see Figure 13). After the start condition, the device address byte is sent, MSB first, including the data direction bit (R/W). This device does not respond to the general call address. After receiving the valid address byte, this device responds with an ACK, a low on the SDA input/output during the high of the ACK-related clock pulse. SDA SCL S P Start Condition Stop Condition Figure 12. Definition of Start and Stop Conditions Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C Submit Documentation Feedback 9 TPL0401A TPL0401B TPL0401C SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 www.ti.com The data byte follows the address ACK. The R/W bit is kept low for transfer from the master to the slave. The data byte is followed by an ACK sent from this device. Data are output only if complete bytes are received and acknowledged. The output data is valid at time (tpv) after the low-to-high transition of SCL, during the clock cycle for the ACK. On the I2C bus, only one data bit is transferred during each clock pulse. The data on the SDA line must remain stable during the high pulse of the clock period, as changes in the data line at this time are interpreted as control commands (start or stop) (see Figure 13). SDA SCL Data Line Stable Data Valid Change of Data Allowed Figure 13. Bit Transfer A stop condition, a low-to-high transition on the SDA input/output while the SCL input is high, is sent by the master (see Figure 13). The number of data bytes transferred between the start and the stop conditions from transmitter to receiver is not limited. Each byte of eight bits is followed by one ACK bit. The transmitter must release the SDA line before the receiver can send an ACK bit. A slave receiver that is addressed must generate an ACK after the reception of each byte. The device that acknowledges has to pull down the SDA line during the ACK clock pulse so that the SDA line is stable low during the high pulse of the ACK-related clock period (see Figure 14). Setup and hold times must be taken into account. Data Output by Transmitter NACK Data Output by Receiver ACK SCL from Master 1 2 8 9 S Start Condition Clock Pulse for Acknowledgment Figure 14. Acknowledgement on the I2C Bus 10 Submit Documentation Feedback Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C TPL0401A TPL0401B TPL0401C www.ti.com SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 TYPICAL APPLICATION 1.5 V + 1 kW VREF1 DDR3 DIMM1 _ 1 kW DPOT TPL0401A/B OP-AMP LMV321 Figure 15. DDR3 Voltage Reference Adjustment Below table shows Ideal values of resistance for a 10k DPOT. The absolute values can vary significantly, but the ratio (Rhw/Rwl) is extremely accurate. Table 1. Resistance Values Table Step Binary 0 0 0.00 Rwl (k) 10.00 Rhw (k) 0.00 1 1 0.08 9.92 0.01 2 10 0.16 9.84 0.02 3 11 0.23 9.77 0.02 4 100 0.31 9.69 0.03 5 101 0.39 9.61 0.04 6 110 0.47 9.53 0.05 7 111 0.55 9.45 0.06 8 1000 0.63 9.38 0.07 9 1001 0.70 9.30 0.08 10 1010 0.78 9.22 0.08 11 1011 0.86 9.14 0.09 12 1100 0.94 9.06 0.10 13 1101 1.02 8.98 0.11 14 1110 1.09 8.91 0.12 15 1111 1.17 8.83 0.13 16 10000 1.25 8.75 0.14 17 10001 1.33 8.67 0.15 18 10010 1.41 8.59 0.16 19 10011 1.48 8.52 0.17 20 10100 1.56 8.44 0.19 21 10101 1.64 8.36 0.20 22 10110 1.72 8.28 0.21 23 10111 1.80 8.20 0.22 24 11000 1.88 8.13 0.23 25 11001 1.95 8.05 0.24 26 11010 2.03 7.97 0.25 27 11011 2.11 7.89 0.27 28 11100 2.19 7.81 0.28 29 11101 2.27 7.73 0.29 30 11110 2.34 7.66 0.31 31 11111 2.42 7.58 0.32 Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C Rhw/Rwl Submit Documentation Feedback 11 TPL0401A TPL0401B TPL0401C SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 www.ti.com Table 1. Resistance Values Table (continued) 12 Step Binary 32 100000 2.50 7.50 0.33 33 100001 2.58 7.42 0.35 34 100010 2.66 7.34 0.36 35 100011 2.73 7.27 0.38 36 100100 2.81 7.19 0.39 37 100101 2.89 7.11 0.41 38 100110 2.97 7.03 0.42 39 100111 3.05 6.95 0.44 40 101000 3.13 6.88 0.45 41 101001 3.20 6.80 0.47 42 101010 3.28 6.72 0.49 43 101011 3.36 6.64 0.51 44 101100 3.44 6.56 0.52 45 101101 3.52 6.48 0.54 46 101110 3.59 6.41 0.56 47 101111 3.67 6.33 0.58 48 110000 3.75 6.25 0.60 49 110001 3.83 6.17 0.62 50 110010 3.91 6.09 0.64 51 110011 3.98 6.02 0.66 52 110100 4.06 5.94 0.68 53 110101 4.14 5.86 0.71 54 110110 4.22 5.78 0.73 55 110111 4.30 5.70 0.75 56 111000 4.38 5.63 0.78 57 111001 4.45 5.55 0.80 58 111010 4.53 5.47 0.83 59 111011 4.61 5.39 0.86 60 111100 4.69 5.31 0.88 61 111101 4.77 5.23 0.91 62 111110 4.84 5.16 0.94 63 111111 4.92 5.08 0.97 64 1000000 5.00 5.00 1.00 65 1000001 5.08 4.92 1.03 66 1000010 5.16 4.84 1.06 67 1000011 5.23 4.77 1.10 68 1000100 5.31 4.69 1.13 69 1000101 5.39 4.61 1.17 70 1000110 5.47 4.53 1.21 71 1000111 5.55 4.45 1.25 72 1001000 5.63 4.38 1.29 73 1001001 5.70 4.30 1.33 74 1001010 5.78 4.22 1.37 75 1001011 5.86 4.14 1.42 76 1001100 5.94 4.06 1.46 77 1001101 6.02 3.98 1.51 78 1001110 6.09 3.91 1.56 Submit Documentation Feedback Rwl (k) Rhw (k) Rhw/Rwl Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C TPL0401A TPL0401B TPL0401C www.ti.com SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 Table 1. Resistance Values Table (continued) Step Binary 79 1001111 6.17 Rwl (k) 3.83 Rhw (k) 1.61 80 1010000 6.25 3.75 1.67 81 1010001 6.33 3.67 1.72 82 1010010 6.41 3.59 1.78 83 1010011 6.48 3.52 1.84 84 1010100 6.56 3.44 1.91 85 1010101 6.64 3.36 1.98 86 1010110 6.72 3.28 2.05 87 1010111 6.80 3.20 2.12 88 1011000 6.88 3.13 2.20 89 1011001 6.95 3.05 2.28 90 1011010 7.03 2.97 2.37 91 1011011 7.11 2.89 2.46 92 1011100 7.19 2.81 2.56 93 1011101 7.27 2.73 2.66 94 1011110 7.34 2.66 2.76 95 1011111 7.42 2.58 2.88 96 1100000 7.50 2.50 3.00 97 1100001 7.58 2.42 3.13 98 1100010 7.66 2.34 3.27 99 1100011 7.73 2.27 3.41 100 1100100 7.81 2.19 3.57 101 1100101 7.89 2.11 3.74 102 1100110 7.97 2.03 3.92 103 1100111 8.05 1.95 4.12 104 1101000 8.13 1.88 4.33 105 1101001 8.20 1.80 4.57 106 1101010 8.28 1.72 4.82 107 1101011 8.36 1.64 5.10 108 1101100 8.44 1.56 5.40 109 1101101 8.52 1.48 5.74 110 1101110 8.59 1.41 6.11 111 1101111 8.67 1.33 6.53 112 1110000 8.75 1.25 7.00 113 1110001 8.83 1.17 7.53 114 1110010 8.91 1.09 8.14 115 1110011 8.98 1.02 8.85 116 1110100 9.06 0.94 9.67 117 1110101 9.14 0.86 10.64 118 1110110 9.22 0.78 11.80 119 1110111 9.30 0.70 13.22 120 1111000 9.38 0.63 15.00 121 1111001 9.45 0.55 17.29 122 1111010 9.53 0.47 20.33 123 1111011 9.61 0.39 24.60 124 1111100 9.69 0.31 31.00 125 1111101 9.77 0.23 41.67 Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C Rhw/Rwl Submit Documentation Feedback 13 TPL0401A TPL0401B TPL0401C SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 www.ti.com Table 1. Resistance Values Table (continued) 14 Step Binary 126 1111110 9.84 0.16 63.00 127 1111111 9.92 0.08 127.00 Submit Documentation Feedback Rwl (k) Rhw (k) Rhw/Rwl Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C TPL0401A TPL0401B TPL0401C www.ti.com SLIS144A - SEPTEMBER 2011 - REVISED MARCH 2012 Changes from Original (September 2011) to Revision A Page * Added TPL0401C device to the Datasheet. ......................................................................................................................... 1 * Added TPL0401C Package. ................................................................................................................................................. 1 * Added TPL0401C Functional Block Diagram. ...................................................................................................................... 2 Copyright (c) 2011-2012, Texas Instruments Incorporated Product Folder Link(s): TPL0401A TPL0401B TPL0401C Submit Documentation Feedback 15 PACKAGE OPTION ADDENDUM www.ti.com 11-Jan-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) TPL0401A-10DCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPL0401B-10DCKR ACTIVE SC70 DCK 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPL0401C-50DCKR PREVIEW SC70 DCK 6 3000 TBD Call TI (3) Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 29-Feb-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 2.25 2.4 1.22 4.0 8.0 Q3 TPL0401A-10DCKR SC70 DCK 6 3000 180.0 8.4 TPL0401A-10DCKR SC70 DCK 6 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 TPL0401B-10DCKR SC70 DCK 6 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPL0401B-10DCKR SC70 DCK 6 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 29-Feb-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPL0401A-10DCKR SC70 DCK 6 3000 202.0 201.0 28.0 TPL0401A-10DCKR SC70 DCK 6 3000 180.0 180.0 18.0 TPL0401B-10DCKR SC70 DCK 6 3000 202.0 201.0 28.0 TPL0401B-10DCKR SC70 DCK 6 3000 180.0 180.0 18.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated