VSD-150C-12 - V-Infinity - Product.Network



•

VSD-150C-12 Single Output DC-DC Converter

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

DC output voltage 12V

Output V. tolerance ±1%

Output rated current 12.5A

Output current range 0-12.5A

Ripple & noise 120mVp-p

Line regulation ±0.5%

Load regulation ±0.5%

DC output power 150W

Efficiency 77%

DC voltage adj. 11-16V

Input voltage range 36~72VDC

Input current 4.2A/48VDC

Inrush current ---

Leakage current <0.75mA/120VAC (SD-150D)

Overload protection 105%~135%

type: foldback current limiting, auto recovery

Over voltage protection 31.5V~37.5V/10% load

Over temperature protection ---

Temperature coefficient ±0.03% / °C (0~50°C)

Set up, rise, hold up time 2s, 50ms, 10m/20mA (only D mode)

Vibration 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes

Withstand voltage I/P-O/P: 1.5KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.

Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH

Storage temp., humidity -20°C~+85°C, 10%-95% RH

Dimensions 7.83x4.33x1.97 inches (199x110x50 mm) Case: 906

Weight 1.76 lbs (0.8 Kg)

Safety standards ---

EMC standards EN55022 class B (radiation), EN61000-4-2,3, 4, 6, 8 ENV50204

verification for SD-150B/C series only (not D series)

Notes: 1. All parameters are specified at rated input, rated load, 25°C 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Line regulation is measured from low line to high line at rated load

5. Load regulation is measured from 0% to 100% rated load

*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to

verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer ’s applications

using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will

be covered outside of standard product warranty.

Features

·2:1 wide input range

·Short circuit, overload, over-voltage

protected

·1500VDC I/O isolation

·Built-in EMI filter, low ripple noise

·100% full load burn-in test

·Low cost, high reliability

·1 year warranty