* VSD-150C-12 Single Output DC-DC Converter Features *2:1 wide input range *Short circuit, overload, over-voltage protected *1500VDC I/O isolation *Built-in EMI filter, low ripple noise *100% full load burn-in test *Low cost, high reliability *1 year warranty DC output voltage Output V. tolerance 12V 1% Output rated current Output current range Ripple & noise Line regulation Load regulation DC output power Efficiency DC voltage adj. Input voltage range Input current Inrush current Leakage current Overload protection 12.5A 0-12.5A 120mVp-p 0.5% 0.5% 150W 77% 11-16V 36~72VDC 4.2A/48VDC --<0.75mA/120VAC (SD-150D) 105%~135% type: foldback current limiting, auto recovery 31.5V~37.5V/10% load --0.03% / C (0~50C) 2s, 50ms, 10m/20mA (only D mode) 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes I/P-O/P: 1.5KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min. I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min. Over voltage protection Over temperature protection Temperature coefficient Set up, rise, hold up time Vibration Withstand voltage Isolation resistance Working temp., humidity Storage temp., humidity Dimensions Weight Safety standards EMC standards Notes: -10C~+60% (refer to output derating curve), 20%-90% RH -20C~+85C, 10%-95% RH 7.83x4.33x1.97 inches (199x110x50 mm) Case: 906 1.76 lbs (0.8 Kg) --EN55022 class B (radiation), EN61000-4-2,3, 4, 6, 8 ENV50204 verification for SD-150B/C series only (not D series) 1. All parameters are specified at rated input, rated load, 25C 70% RH ambient 2. Tolerance includes set up tolerance, line regulation, load regulation 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uF & 47 uF capacitor 4. Line regulation is measured from low line to high line at rated load 5. Load regulation is measured from 0% to 100% rated load *V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer's applications using V-Infinity products other than repair or replacing (at V-I's option) V-Infinity products not meeting V-I's published specifications. Nothing will be covered outside of standard product warranty. V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258 * VSD-150C-12 Single Output DC-DC Converter Block Diagram Output Derating Static Characteristics Dimensions (mm) V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258