57257-5000 RING TERMINAL HAND CRIMP TOOL PRODUCT SPECIFICATION ATP-57257-5000E 2006/01/13, Rev.- B Molex Japan Co., Ltd. 1. Description This tool is a hand crimp tool which crimps a copper stranded wire or a copper solid wire to a "Non-insulated crimp-type terminal" and a "Non-insulated crimp-type sleeve" that provides to JIS C2805 and JIS C2806 standards. This tool is an acceptable tool in JIS C9711 standard. 2. Specifications 1) Tool name: 57257-5000 Ring Terminal Hand Crimp Tool 2) Tool number: 57257-5000 3) Outer dimensions and weight: 275 (width) x 76 (depth) x 18 (thickness) mm, Approx. 430gf 4) Management method: Pullout strength (The following JIS standard value) 5) Pullout strength test: Add more than the shown load to the below at the fixed speed of 25 mm per minute for ten seconds. 6) Applicable terminal and wire: Non-insulated Crimp-type Terminal and Crimp-type Sleeve Applicable wire size Solid wire (mm) Stranded wire (Square mm) AWG Pullout strength value: N (kgf) 1.25 Phi 0.57-1.14 0.25-1.65 #16-22 200 (20.4) 2 Phi 1.14-1.82 1.04-2.63 #14-16 290 (29.6) 3.5 Phi 1.82-2.40 2.63-4.60 #12 540 (55.1) 5.5 Phi 1.82-2.89 2.63-6.64 #10-12 780 (79.5) 8 Phi 2.89-3.65 6.64-10.52 #8 980 (100) Nominal 3. Tool Appearance Applicable Terminal (One example) 57257-5000 Non-insulated Crimp-type Terminal and Sleeve