Specications
● Core System
Core Module Interface
ETX® ver 2.7 (3.0)
Board Form Factor
304.8 mm x 190 mm (ATX)
Expansion Busses
Four 32-bit PCI slots
Three16-bit ISA slots
One Mini PCI slot
POST LEDs
Onboard diagnostics for BIOS POST codes
IDE Support
Four IDE devices (two connectors)
Parallel Port
One port SSP, ECP, and EEP mode
Serial Port
Two 16550 compatible RS-232 ports (COM1/2)
Two additional ports COM3/4 from secondary multi I/O
KB/Mouse
Two 6-pin mini DIN connectors (on rear I/O panel)
USB
Four ports (on rear I/O panel) v1.1 and v2.0 compatible
LAN
RJ-45 (on rear I/O panel)
● Secondary Multi I/O
FDD
Up to two oppy drives
Serial
One 16550 compatible RS-232 ports (COM3), one RS-232/422/485
Compatible port (COM4) and one IrDA header
Parallel
Secondary parallel port
GPIO
F75111R provides 20 GPIO.
● Audio
Type: Onboard amplier with Line-In, Speaker-out and Mic (on rear I/O panel)
Line-In/Out, Speaker-out
● Video
VGA: DB25 connector for analog VGA displays (on rear I/O panel)
LVDS: Onboard header supporting 36-bit LVDS
TV-out: Onboard header for PAL/NTSC TV
TV-out (NTSC, PAL), LVDS 32-bit
● POST Code Display
LED: 2-digit 7-segment LED display
Function: Displays POST (Power On Self Test) code
● Power and Operation
Connectors: ATX and AT onboard
Switches: Onboard RESET and ATX switch
ETX-Proto
ETX
®
Reference Carrier Board in ATX Form Factor
Features
●
Four PCI slots, three ISA slots, one Mini PCI slot
●
POST code diagnostics
●
Secondary Multi I/O
●
Disk-On-Chip and CF card support
●
Audio amplifier