ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR GENERAL DESCRIPTION FEATURES The ICS843-106 is a Fibre Channel Dual Output Oscillator and a member of the HiPerClockSTM HiPerClocks TM family of high perfor mance devices from ICS. The ICS843-106 uses a 25MHz crystal to synthesize 106.25MHz. The ICS843-106 has excellent jitter performance. The ICS843-106 is packaged in a small 8-pin TSSOP, making it ideal for use in systems with limited board space. * One LVCMOS/LVTTL output, 15 output impedance One LVPECL output pair ICS * Crystal oscillator interface designed for 25MHz, 18pF parallel resonant crystal * Output frequency: 106.25MHz * Random jitter: 3ps (typical) * Deterministic jitter: 0.24ps (typical) * 3.3V operating supply * 0C to 70C ambient operating temperature * Available in both standard and lead-free RoHS-compliant packages BLOCK DIAGRAM PIN ASSIGNMENT LVCMOS 106.25MHz Q0 25MHz XTAL_IN Clock Synthesizer XTAL_OUT LVPECL 106.25MHz VCC XTAL_IN XTAL_OUT VEE 1 2 3 4 8 7 6 5 Q1 nQ1 VCCO Q0 ICS843-106 Q1 nQ1 8-Lead TSSOP 4.40mm x 3.0mm x 0.925mm package body G Package Top View ICS843-106 8-Lead SOIC 3.90mm x 4.92mm x 1.37mm body package M Package Top View 843AG-106 www.icst.com/products/hiperclocks.html 1 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR TABLE 1. PIN DESCRIPTIONS Number Name Type 1 Power 4 VCC XTAL_IN, XTAL_OUT VEE 5 Q0 Output Description 6 VCCO Power Positive supply pin. Crystal oscillator interface. XTAL_IN is the input, XTAL_OUT is the output. Negative supply pin. Single-ended clock output. LVCMOS/LVTTL interface levels. 15 output impedance. Output supply pin. 7, 8 nQ1, Q1 Output Differential LVPECL output pair. 2, 3 Input Power TABLE 2. PIN CHARACTERISTICS Symbol Parameter CIN Input Capacitance ROUT Output Impedance 843AG-106 Test Conditions Minimum Q0 www.icst.com/products/hiperclocks.html 2 Typical Maximum Units 4 pF 15 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR ABSOLUTE MAXIMUM RATINGS Supply Voltage, VCC 4.6V Inputs, VI -0.5V to VCC + 0.5 V Outputs, VO (LVCMOS) -0.5V to VCCO + 0.5V NOTE: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond those listed in the DC Characteristics or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. Outputs, IO (LVPECL) Continuous Current 50mA Surge Current 100mA Package Thermal Impedance, JA 8 Lead TSSOP 101.7C/W (0 mps) 8 Lead SOIC 112.7C/W (0 lfpm) Storage Temperature, TSTG -65C to 150C TABLE 3A. POWER SUPPLY DC CHARACTERISTICS, VCC = VCCO = 3.3V0.3V, TA = 0C TO 70C Symbol Parameter Test Conditions Minimum Typical Maximum Units VCC Positive Supply Voltage 3.0 3.3 3.6 V VCCO Output Supply Voltage 3.0 3.3 3.6 V IEE Power Supply Current 116 mA ICC Power Supply Current 96 mA ICCO Output Supply Current 24 mA Maximum Units TABLE 3B. LVCMOS/LVTTL DC CHARACTERISTICS, VCC = VCCO = 3.3V0.3V, TA = 0C TO 70C Symbol Parameter VOH Output High Voltage; NOTE 1 Test Conditions Minimum Typical 2.6 V Output Low Voltage; NOTE 1 VOL NOTE 1: Outputs terminated with 50 to VCCO/2. See Parameter Measurement Information Section, "3.3V Output Load Test Circuit". 0.5 V Maximum Units TABLE 3C. LVPECL DC CHARACTERISTICS, VCC = VCCO = 3.3V0.3V, TA = 0C TO 70C Symbol Parameter Test Conditions Minimum Typical VOH Output High Voltage; NOTE 1 VCCO - 1.4 VCCO - 0.9 V VOL Output Low Voltage; NOTE 1 VCCO - 2.0 VCCO - 1.7 V VSWING Peak-to-Peak Output Voltage Swing 0.6 1.0 V NOTE 1: Outputs terminated with 50 to VCCO - 2V. 843AG-106 www.icst.com/products/hiperclocks.html 3 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR TABLE 4. CRYSTAL CHARACTERISTICS (NOTE 1) Parameter Test Conditions Minimum Mode of Oscillation Typical Maximum Units Fundamental Frequency 25 MHz Frequency Tolerance Frequency Stability Over Operating Temperature Range Load Capacitance (CL); NOTE 2 30 ppm 30 ppm 18 pF Aging for 10 Years 15 ppm Drive Level NOTE 1: Using an HC49/US SMD package, the parameters shown above target 100ppm accuracy. NOTE 2: See Cr ystal Input Interface in the Application Information Section. 1 mW Maximum Units TABLE 5. AC CHARACTERISTICS, VCC = VCCO = 3.3V0.3V, TA = 0C TO 70C Symbol Parameter fOUT Output Frequency Test Conditions Minimum Typical 106.25 MH z tDJ Deterministic Jitter ; NOTE 1 0.24 ps tRJ 3 ps 3.12 ps tp-p Random Jitter ; NOTE 1 RMS of Total Distribution (); NOTE 2 Peak-to-Peak Jitter ; NOTE 1 24 ps tOSC Oscillation Star t Up Time t R / tF Output Rise/Fall Time tRMS 10 ms 100 500 ps 250 800 ps odc Output Duty Cycle 48 NOTE 1: Measured using Wavecrest SIA-3000. NOTE 2: Measured using Wavecrest SIA-3000, Tj @ 10e-12BER result divided by 14. 52 % 843AG-106 Q0 Q1/nQ1 20% to 80% www.icst.com/products/hiperclocks.html 4 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR PARAMETER MEASUREMENT INFORMATION 1.65V 0.15V 2V SCOPE VCC, VCCO VCC, VCCO Qx SCOPE Qx LVCMOS LVPECL nQx GND VEE -1.65V 0.15V -1.3V 0.3V 3.3V LVCMOS OUTPUT LOAD AC TEST CIRCUIT 3.3V LVPECL OUTPUT LOAD AC TEST CIRCUIT V nQ1 CC 2 Q0 Q1 t PW t odc = t PW t PERIOD t PW odc = x 100% t PW x 100% t PERIOD t PERIOD LVPECL OUTPUT DUTY CYCLE/PULSE WIDTH/PERIOD LVCMOS OUTPUT DUTY CYCLE/PULSE WIDTH/PERIOD 80% PERIOD 80% 80% 80% VSW I N G Clock Outputs 20% 20% tR Clock Outputs tF LVCMOS OUTPUT RISE/FALL TIME 843AG-106 20% 20% tR tF LVPECL OUTPUT RISE/FALL TIME www.icst.com/products/hiperclocks.html 5 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR APPLICATION INFORMATION RECOMMENDATIONS FOR UNUSED OUTPUT PINS LVCMOS OUTPUT: An unused LVCMOS output should be terminated with 100 to ground as close as possible to the device. LVPECL OUTPUT All unused LVPECL outputs can be left floating. We recommend that there is no trace attached. Both sides of the differential output pair should either be left floating or terminated. CRYSTAL INPUT INTERFACE resonant crystal and were chosen to minimize the ppm error. The optimum C1 and C2 values can be slightly adjusted for different board layouts. The ICS843-106 has been characterized with 18pF parallel resonant crystals. The capacitor values, C1 and C2, shown in Figure 1 below were determined using a 25MHz, 18pF parallel XTAL_OUT C1 12p X1 18pF Parallel Cry stal XTAL_IN C2 12p Figure 1. CRYSTAL INPUt INTERFACE 843AG-106 www.icst.com/products/hiperclocks.html 6 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR FREQUENCY STABILITY The table shown provides a basic guideline in selecting the proper quartz crystal that meets a timing budget of 100ppm. For more information on selecting the proper Parameter Typical Units Frequency Tolerance 30 ppm Frequency Stability 30 ppm Aging for 10 Years 15 ppm Accuracy of ICS Oscillator 10 ppm Load Capacitance Accuracy 3 ppm Total Overall Timing Error 88 ppm crystal, see the application note, Crystal Timing Budget and Accuracy for FemtoClockTM . TERMINATION FOR 3.3V LVPECL OUTPUT The clock layout topology shown below is a typical termination for LVPECL outputs. The two different layouts mentioned are recommended only as guidelines. drive 50 transmission lines.Matched impedance techniques should be used to maximize operating frequency and minimize signal distortion. Figures 2A and 2B show two different layouts which are recommended only as guidelines. Other suitable clock layouts may exist and it would be recommended that the board designers simulate to guarantee compatibility across all printed circuit and clock component process variations. FOUT and nFOUT are low impedance follower outputs that generate ECL/LVPECL compatible outputs. Therefore, terminating resistors (DC current path to ground) or current sources must be used for functionality. These outputs are designed to 3.3V Zo = 50 FOUT 125 FIN 125 Zo = 50 Zo = 50 50 RTT = 1 Z ((VOH + VOL) / (VCC - 2)) - 2 o FOUT 50 VCC - 2V FIN Zo = 50 RTT 84 FIGURE 2A. LVPECL OUTPUT TERMINATION 843AG-106 84 FIGURE 2B. LVPECL OUTPUT TERMINATION www.icst.com/products/hiperclocks.html 7 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR POWER CONSIDERATIONS This section provides information on power dissipation and junction temperature for the ICS843-106. Equations and example calculations are also provided. 1. Power Dissipation. The total power dissipation for the ICS843-106 is the sum of the core power plus the power dissipated in the load(s). The following is the power dissipation for VCC = 3.3V + 0.3V = 3.6V, which gives worst case results. NOTE: Please refer to Section 3 for details on calculating power dissipated in the load. * * Power (core)MAX = VCC_MAX * IEE_MAX = 3.6V * 116mA = 417.6mW Power (outputs)MAX = 30mW/Loaded Output pair Total Power_MAX (3.465V, with all outputs switching) = 417.6mW + 30mW = 447.6mW 2. Junction Temperature. Junction temperature, Tj, is the temperature at the junction of the bond wire and bond pad and directly affects the reliability of the device. The maximum recommended junction temperature for HiPerClockSTM devices is 125C. The equation for Tj is as follows: Tj = JA * Pd_total + TA Tj = Junction Temperature JA = Junction-to-Ambient Thermal Resistance Pd_total = Total Device Power Dissipation (example calculation is in section 1 above) TA = Ambient Temperature In order to calculate junction temperature, the appropriate junction-to-ambient thermal resistance JA must be used. Assuming a moderate air flow of 1 meter per second and a multi-layer board, the appropriate value is 90.5C/W per Table 6A below. Therefore, Tj for an ambient temperature of 70C with all outputs switching is: 70C + 0.448W * 90.5C/W = 110.5C. This is below the limit of 125C. This calculation is only an example. Tj will obviously vary depending on the number of loaded outputs, supply voltage, air flow, and the type of board (single layer or multi-layer). TABLE 6A. THERMAL RESISTANCE JA FOR 8-PIN TSSOP, FORCED CONVECTION JA by Velocity (Meters per Second) Multi-Layer PCB, JEDEC Standard Test Boards 0 1 2.5 101.7C/W 90.5C/W 89.8C/W TABLE 6B. THERMAL RESISTANCE JA FOR 8 LEAD SOIC FORCED CONVECTION JA by Velocity (Linear Feet per Minute) Single-Layer PCB, JEDEC Standard Test Boards Multi-Layer PCB, JEDEC Standard Test Boards 0 200 500 153.3C/W 112.7C/W 128.5C/W 103.3C/W 115.5C/W 97.1C/W NOTE: Most modern PCB designs use multi-layered boards. The data in the second row pertains to most designs. 843AG-106 www.icst.com/products/hiperclocks.html 8 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR 3. Calculations and Equations. The purpose of this section is to derive the power dissipated into the load. LVPECL output driver circuit and termination are shown in Figure 3. VCC Q1 VOUT RL 50 VCC - 2V FIGURE 3. LVPECL DRIVER CIRCUIT AND TERMINATION To calculate worst case power dissipation into the load, use the following equations which assume a 50 load, and a termination voltage of V - 2V. CC * For logic high, VOUT = V OH_MAX (V CCO_MAX * -V OH_MAX OL_MAX CCO_MAX -V OL_MAX CC_MAX - 0.9V ) = 0.9V For logic low, VOUT = V (V =V =V CC_MAX - 1.7V ) = 1.7V Pd_H is power dissipation when the output drives high. Pd_L is the power dissipation when the output drives low. Pd_H = [(VOH_MAX - (VCC_MAX - 2V))/R ] * (VCC_MAX - VOH_MAX) = [(2V - (V _MAX - VOH_MAX))/R ] * (VCC_MAX - VOH_MAX) = L CC L [(2V - 0.9V)/50] * 0.9V = 19.8mW Pd_L = [(V OL_MAX - (V CC_MAX - 2V))/R ] * (V L CC_MAX -V OL_MAX ) = [(2V - (V CC_MAX -V ))/R ] * (V OL_MAX L CC_MAX -V OL_MAX )= [(2V - 1.7V)/50] * 1.7V = 10.2mW Total Power Dissipation per output pair = Pd_H + Pd_L = 30mW 843AG-106 www.icst.com/products/hiperclocks.html 9 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR RELIABILITY INFORMATION TABLE 7A. JAVS. AIR FLOW TABLE FOR 8 LEAD TSSOP JA by Velocity (Meters per Second) Multi-Layer PCB, JEDEC Standard Test Boards 0 1 2.5 101.7C/W 90.5C/W 89.8C/W TABLE 7B. JAVS. AIR FLOW TABLE 8 LEAD SOIC JA by Velocity (Linear Feet per Minute) Single-Layer PCB, JEDEC Standard Test Boards Multi-Layer PCB, JEDEC Standard Test Boards 0 200 500 153.3C/W 112.7C/W 128.5C/W 103.3C/W 115.5C/W 97.1C/W NOTE: Most modern PCB designs use multi-layered boards. The data in the second row pertains to most designs. TRANSISTOR COUNT The transistor count for ICS843-106 is: 2376 843AG-106 www.icst.com/products/hiperclocks.html 10 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR PACKAGE OUTLINE - G SUFFIX FOR 8 LEAD TSSOP PACKAGE OUTLINE - M SUFFIX FOR 8 LEAD SOIC TABLE 8A. PACKAGE DIMENSIONS TABLE 8B. PACKAGE DIMENSIONS SYMBOL Millimeters Minimum N A SYMBOL Maximum 8 Millimeters MINIMUM N -- 1.20 A MAXIMUM 8 1.35 1.75 A1 0.05 0.15 A1 0.10 0.25 A2 0.80 1.05 B 0.33 0.51 b 0.19 0.30 C 0.19 0.25 c 0.09 0.20 D 4.80 5.00 D 2.90 3.10 E 3.80 4.00 4.50 H 5.80 6.20 E E1 6.40 BASIC 4.30 e e 0.65 BASIC 1.27 BASIC h 0.25 0.50 L 0.45 0.75 L 0.40 1.27 0 8 0 8 aaa -- 0.10 Reference Document: JEDEC Publication 95, MS-012 Reference Document: JEDEC Publication 95, MO-153 843AG-106 www.icst.com/products/hiperclocks.html 11 REV. A JANUARY 10, 2006 ICS843-106 Integrated Circuit Systems, Inc. 106.25MHZ, LVCMOS, LVPECL DUAL OUTPUT OSCILLATOR TABLE 9. ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature ICS843AG-106 3A106 8 lead TSSOP tube 0C to 70C ICS843AG-106T 3A106 8 lead TSSOP 2500 tape & reel 0C to 70C ICS843AG-106LF TBD 8 lead "Lead-Free" TSSOP tube 0C to 70C ICS843AG-106LFT TBD 8 lead "Lead-Free" TSSOP 2500 tape & reel 0C to 70C ICS843AM-106 TBD 8 lead SOIC tube 0C to 70C ICS843AM-106T TBD 8 lead SOIC 2500 tape & reel 0C to 70C ICS843AM-106LF TBD 8 lead "Lead-Free" SOIC tube 0C to 70C ICS843AM-106LFT TBD 8 lead "Lead-Free" SOIC 2500 tape & reel 0C to 70C NOTE: Par ts that are ordered with an "LF" suffix to the par t number are the Pb-Free configuration and are RoHS compliant. The aforementioned trademark, HiPerClockSTM is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated (ICS) assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. 843AG-106 www.icst.com/products/hiperclocks.html 12 REV. A JANUARY 10, 2006