Emboss Tape SHLD CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications ------------------- Developed for PDP, LCD or small electronics equipment. This is a dual-row small crimp type connector with a secure locking system or without-designed for different applications. The PC board layout is compatible with that of existing SHD connector, which allows for replacement of the above existing connector. * Secure housing lock structure (for locking type) * Prevent deformation of contacts * A contact lock structure * Strong structure against external force * Current rating: 1.0 A AC, DC (AWG #28) * Voltage rating: 50 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 30 m max. After environmental tests/ 40 m max. * Insulation resistance: 100 M min. * Withstanding voltage: 500 VAC/minute * In using the products, refer to "Handling Precaution for Terminal and Connector" described on our website (Technical documents of Product information page). * Contact JST for details. * RoHS2 compliance. Standards ---------------------- 0 Recognized E60389 PC board layout and Assembly layout Top entry type Side entry type 6.6 (5.8) 9.05 6.7 Circuit No.1 5.4 1 4.6 0.1 0.6 Connector outline 1.8 0.1 4.1 0.850.1 0.9 4.2 1.6 (7.3) 7.2 1.80.1 4 0.5 Circuit No.1 5.4 5.6 0.85 0.1 6.15 0.6 0.9 0.1 1.6 1 0.1 1.25 0.1 Note: 1.The above figure is the figure viewed from the connector mounting side. 2.Tolerances are non-cumulative: 0.1 mm for all centers. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire mm2 AWG# Model No. SSHL-003GA1-P0.2 0.0320.08 0.40.8 3228 41,000 Material and Finish 4.75 2 0.5 Insulation O.D. (mm) Q'ty/reel Phosphor bronze, nickel-undercoated, Mating part; gold-plated, Crimping part; gold-plated 0.8 2.35 0.8 RoHS2 compliance 0.4 Contact Crimping machine Crimp applicator SSHL-003GA1-P0.2 AP-K2N Applicator Dies Crimp applicator with dies MKS-L-10-3 MK/SSH/L-003-02 APLMK SSHL002-02 *MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1 SHLD CONNECTOR Housing B A Circuits Model No. 20 SHLDP-20V-S(B) SHLDP-30V-S(B) 30 1 2.6 40 SHLDP-40V-S(B) SHLDP-50V-S(B) 5.7 50 A Dimensions (mm) B C Q'ty/bag 9.0 11.4 13.0 3,500 14.0 16.4 18.0 2,500 19.0 21.4 23.0 2,000 24.0 26.4 28.0 1,500 Material and Finish N-1 PBT, UL94V-0, natural (white) Polarity rib Circuit No.1 mark 4.6 C RoHS2 compliance 5.4 With secure lock type With secure lock type Circuits Model No. B 20 A 30 SHLDP-20V-S-1(B) SHLDP-30V-S-1(B) SHLDP-40V-S-1(B) SHLDP-50V-S-1(B) 40 1 2.6 50 A Dimensions (mm) B C Q'ty/bag 9.0 14.7 15.7 3,000 14.0 19.7 20.7 2,000 19.0 24.7 25.7 1,500 24.0 29.7 30.7 1,200 5.7 6 Material and Finish PBT, UL94V-0, natural (white) N-1 Circuit No.1 mark Polarity rib RoHS2 compliance 4.6 5.4 C Shrouded header Top entry type Circuits 20 30 4.05 40 0.2 1.5 1 A 50 Model No. Top entry type Side entry type BM20B-SHLDS-G-TFT BM30B-SHLDS-G-TFT BM40B-SHLDS-G-TFT BM50B-SHLDS-G-TFT SM20B-SHLDS-G-TF SM30B-SHLDS-G-TF SM40B-SHLDS-G-TF SM50B-SHLDS-G-TF Dimensions (mm) Q'ty/reel A B Top type Side type 9.0 13.0 1,400 1,000 14.0 18.0 1,400 1,000 19.0 23.0 1,400 1,000 24.0 28.0 1,400 1,000 Material and Finish 0.8 5 Contact: Phosphor bronze, nickel-undercoated, gold-plated Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) B RoHS2 compliance This product displays (LF)(SN) on a label. Side entry type 5.45 Circuit No.1 0.2 1 A B 1.45 0.75 0.55 1.5 5.4 2