Hazardous Location Enclosures Hazardous Location Enclosures Hazardous Locations Hazardous Location Enclosures Hazardous Location Enclosures Spec-00714 E63.422.2211 7 763.422.2600 ZONEXTM ATEX- and IECEx-Certified, Type 4X, Hinged Cover FEATURES * * * * * * 0-mm brass internal/external bonding provision 1 Type 316 stainless steel quarter-turn latch with slotted insert L arge 3-mm-thick, flat gasketed gland plate(s) Continuous seal gasket on door and gland plate(s) Hardware for panel and bonding provisions included Operating temperature range: -40 C to +70 C standard polyurethane gasket SPECIFICATIONS * * * abricated from Type 316 stainless steel F 3-mm thick individual welded-on top and bottom wall-mounting brackets Increased safety: Ex e. IECEx e certified FINISH #4 brushed finish ACCESSORIES Panels Security inserts and handles Gland Plates Stopping plugs Vent/drains Hazardous Location Thermostat Hazardous Location Heater NOTES INDUSTRY STANDARDS Intrinsically safe terminal blocks can be installed in populated nonstandard enclosures. IECEx populated enclosures require IECEx-certified components specifically listed in Certification (See IECEx SIR 09.0100 for more detail). ATEX Directive 94/9/EC ATEX Sira 09ATEX3224U Ex e IIC Gb Ex tb IIIC Db IP 66 EN60079-0:2009 EN60079-7:2007 EN61241-0:2006 EN61241-1:2004 MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Hoffman offers a ZONEX-specific modification program with ATEX certification. Contact your local Hoffman sales office or distributor for complete information. IECEx IECEx SIR 09.0099U Ex e IIC Gb Ex tb IIIC Db IP 66 IEC 60079-0:2007-2010 IEC 60079-7:2006-2007 IEC 61241-0:2004 IEC 61241-1:2004 Type 4, 4X, 12; File No. E61997 cUL C22.2 No. 94 Listed; Type 4, 4X, 12; File No. E61997 NEMA/EEMAC Type 4, 4X, 12 IEC 60529, IP66 Material changes: Type 304 stainless steel, painted mild steel or aluminum Gasket changes: High-temperature silicone gasket Side-mount brackets available Holes and cutouts Paint DIN rails Ground bars Terminal block installation and marking Tagging Accessory installations: drain/breathers and stopping plugs Bulletin: HL APPLICATION ZONEXTM Enclosures are designed and certified to meet ATEX Directive 94/9/EC as well as IECEx standards for increased safety in housing electrical components in Zone 1 and Zone 2 applications. Hoffman's ATEX Ex e enclosures are not intended for use in explosion-proof or flame-proof applications. 1 Hazardous Locations SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00714 E Hazardous Location Enclosures Hazardous Location Enclosures Standard Product Catalog Number EXE12126SS61 EXE12128SS61 EXE16126SS61 EXE16128SS61 EXE16166SS61 EXE16168SS61 EXE20166SS61 EXE20168SS61 EXE20208SS61 EXE24208SS61 EXE24248SS61 EXE242412SS61 EXE30208SS61 EXE30248SS61 EXE303012SS61 EXE36248SS61 AxBxC mm/in. 305 x 305 x 152 12.00 x 12.00 x 6.00 305 x 305 x 203 12.00 x 12.00 x 8.00 406 x 305 x 152 16.00 x 12.00 x 6.00 406 x 305 x 203 16.00 x 12.00 x 8.00 406 x 406 x 152 16.00 x 16.00 x 6.00 406 x 406 x 203 16.00 x 16.00 x 8.00 508 x 406 x 152 20.00 x 16.00 x 6.00 508 x 406 x 203 20.00 x 16.00 x 8.00 508 x 508 x 203 20.00 x 20.00 x 8.00 610 x 508 x 203 24.00 x 20.00 x 8.00 610 x 610 x 203 24.00 x 24.00 x 8.00 610 x 610 x 305 24.00 x 24.00 x 12.00 762 x 508 x 203 30.00 x 20.00 x 8.00 762 x 610 x 203 30.00 x 24.00 x 8.00 762 x 762 x 305 30.00 x 30.00 x 12.00 914 x 610 x 203 36.00 x 24.00 x 8.00 EQUIPMENT PROTECTION SOLUTIONS Spec-00714 E F mm/in. 32 1.25 1.25 1.25 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 76 3.00 J mm/in. 152 6.00 152 6.00 203 8.00 203 8.00 203 8.00 203 8.00 254 10.00 254 10.00 254 10.00 305 12.00 305 12.00 305 12.00 381 15.00 381 15.00 381 15.00 457 18.00 P mm/in. 241 9.50 241 9.50 241 9.50 241 9.50 343 13.50 343 13.50 343 13.50 343 13.50 445 17.50 445 17.50 546 21.50 546 21.50 445 17.50 546 21.50 546 21.50 546 21.50 Q mm/in. 95 3.75 146 5.75 95 3.75 146 5.75 95 3.75 146 5.75 95 3.75 146 5.75 146 5.75 146 5.75 146 5.75 178 7.00 146 5.75 146 5.75 178 7.00 146 5.75 PH 763.422.2211 * FAX 763.422.2600 * HOFFMANONLINE.COM No. of latches 1 Optional Panel CP1212G 1 CP1212G 1 CP1612G 1 CP1612G 1 CP1616G 1 CP1616G 1 CP2016G 1 CP2016G 1 CP2020G 1 CP2420G 2 CP2424G 2 CP2424G 2 CP3020G 2 CP3024G 2 CP3030G 2 CP3624G Hazardous Locations 2 Hazardous Location Enclosures Hazardous Location Enclosures ; ; % & ) - % >@ & >@ $ $ >@ $ >@ ; ;; 5 4 3 3 Hazardous Locations SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00714 E Hazardous Location Enclosures Hazardous Location Enclosures Gland Plate : + Bulletin: HL2 Standard Product Gland Plate Catalog Number GPS126SS6 Description Gland plate for 12-in. x 6-in. side with ground GPS128SS6 Gland plate for 12-in. x 8-in. side with ground GP126SS6 Gland plate for 12-in. x 6-in. surface without ground GP128SS6 Gland plate for 12-in. x 8-in. surface without ground GP166SS6 Gland plate for 16-in. x 6-in. surface without ground GP168SS6 Gland plate for 16-in. x 8-in. surface without ground GP206SS6 Gland plate for 20-in. x 6-in. surface without ground GP208SS6 Gland plate for 20-in. x 8-in. surface without ground GP248SS6 Gland plate for 24-in. x 8-in. surface without ground GP2412SS6 Gland plate for 24-in. x 12-in. surface without ground Cutout Size mm/in. 191 x 95 7.50 x 3.75 191 x 146 7.50 x 5.75 241 x 95 9.50 x 3.75 241 x 146 9.50 x 5.75 343 x 95 13.50 x 3.75 343 x 146 13.50 x 5.75 445 x 95 17.50 x 3.75 446 x 146 17.50 x 5.75 546 x 146 21.50 x 5.75 246 x 178 21.50 x 7.00 WxH mm/in. 228 x 133 8.98 x 5.23 228 x 184 8.98 x 7.23 279 x 133 10.98 x 5.23 279 x 184 10.98 x 7.23 380 x 133 14.98 x 5.23 380 x 184 14.98 x 7.23 482 x 133 18.98 x 5.23 482 x 184 18.98 x 5.23 584 x 184 22.98 x 7.23 584 x 215 22.98 x 8.48 GP2412SS6 is also used on 30-in. wide, 12-in. deep standard enclosure bottom. ATEX Directive and Classification System Since 2003, manufacturers across the European Union (EU) have been obliged to comply with strict new EU directives governing safety in explosive atmospheres. Called ATEX (from the French ATmospheres EXplosives), ATEX Directive 94/9/EC has an impact not only on European manufacturers, but also on non-European makers of industrial equipment wishing to sell in Europe. Two of the most common classification systems for hazardous locations are the NEC Division Classification system and the Zone Classification system used by the European Union (EU) and the International Electrotechnical Commission (IEC). Article 500 of the NEC also classifies hazardous locations according to the properties of the flammable vapors, liquids or gases, or according to the combustible dusts or fibers that may be present and the likelihood that a flammable or combustible concentration or quantity is present. Articles 505 and 506 of the NEC refer to zone classifications. Refer to the Technical Information section of the Specifier's Guide for specific definitions and additional information. Hoffman's ATEX enclosures are not intended for use in explosion-proof or flame-proof (Ex d) applications. NEC Divisions and IEC Zones (Not Interchangeable) Frequency of Hazard Occurrence Continuous Hazard Intermittent, Periodic Hazards Abnormal Condition Hazard EQUIPMENT PROTECTION SOLUTIONS Spec-00714 E NEC Division Classification System Division 1 Division 1 Division 2 EU and IEC Zone Classification System Zone 0 Zone 1 Zone 2 PH 763.422.2211 * FAX 763.422.2600 * HOFFMANONLINE.COM Hazardous Locations 4