General Purpose Low Power PCB Relays SCHRACK Miniature PCB Relay REL n n n n 1 pole 5 A, 1 form A (NO) contact Low height 12.0mm Especially suited for applications white goods, consumer electronics, etc. Plastic materials according to IEC 60335-1 (domestic appliances) Typical applications PLC's, timers, temperature control, I/O cards, white goods. Z Approvals Coil Data Coil voltage range Operative range, IEC 61810 Coil insulation system according UL1446 VDE Cert. No. 40010579, UL E214025 Technical data of approved types on request. Coil versions, DC coil Coil Rated Operate Release code voltage voltage voltage VDC VDC VDC 5 5 3.75 0.5 6 6 4.5 0.6 12 12 9.0 1.2 24 24 18.0 2.4 36 36 27.0 3.6 48 48 36.0 4.8 Contact Data Contact arrangement 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 5A Limiting making current, max 4s, duty factor 10% 15A Contact material AgNi 90/10, AgCdO Frequency of operation with/without load 360/72000 ops./h Operate/release time max. 10/5ms Bounce time max. 4ms Contact ratings Type Contact Load IEC 61810 REL30 A (NO) 5A, 250VAC, cos=1, 85C REL30 A (NO) 3A, 400VAC, cos=1, 85C REL34 A (NO) 5A, 250VAC, cos=1, 85C REL34 A (NO) 3A, 400VAC, cos=1, 85C UL 508 REL30 A (NO) 5A, 250VAC,general purpose, 85C REL30 A (NO) 1/4 hp, 240VAC, Motor 85C REL30 A (NO) B300 pilot duty 40C REL34 A (NO) 5A, 250VAC, resistive, 85C Mechanical endurance >10x106 operations Cycles 5 to 48VDC 2 F Coil resistance 10%1) 70 100 400 1600 36001) 64001) Rated coil power mW 357 360 360 360 360 360 1) Coil resistance 15%. All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. 100x103 400x103 100x103 400x103 100x103 30x103 6x103 100x103 Insulation Data Initial dielectric strength between open contacts 1000Vrms between contact and coil 3000Vrms Initial insulation resistance open contact circuit >10x109 coil-contact circuit >10x109 Clearance/creepage between contact and coil 4/4mm Material group of insulation parts IIIa 10-2014, Rev. 1014 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 1 General Purpose Low Power PCB Relays SCHRACK Miniature PCB Relay REL (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire according EN60335, par.30 Ambient temperature -40 to +85C Category of environmental protection IEC 61810 RTII - flux proof Shock resistance (destructive) 100 g Terminal type PCB-THT Weight5g Resistance to soldering heat THT IEC 60068-2-20 270C/10s Packaging/unittube/25 PCB layout / terminal assignment Bottom view on solder pins Dimensions Product code structure Typical product code REL 3 4 024 Type REL Miniature PCB Relay REL Contact arrangement 3 1 form A (NO) contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Product code Version 0 AgCdO Contacts Contact material REL34006 flux proof 1 form A AgNi90/10 REL34012 1 NO contact REL34024 REL34048 REL30006 AgCdO REL30012 REL30024 REL30048 2 10-2014, Rev. 1014 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Coil 6VDC 12VDC 24VDC 48VDC 6VDC 12VDC 24VDC 48VDC Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Part number 3-1415535-5 3-1415535-6 3-1415535-7 3-1415535-8 1393218-2 4-1393217-6 4-1393217-7 1393218-3 Catalog product data, `Definitions' section, application notes and all specifications are subject to change.