MKW21D256VHA5R - NXP SEMICONDUCTORS

MKW2xD Data Sheet

Supports MKW24D512V, MKW22D512V, MKW21D512V, and

MKW21D256V Products

The MKW2xD is a low power, compact integrated device

consisting of:

• A high-performance 2.4 GHz IEEE 802.15.4 compliant

radio transceiver

• A powerful ARM Cortex-M4 MCU system with connectivity

• Precision mixed signal analog peripherals

The MKW2xD family of devices are used to easily enable

connectivity based on the IEEE 802.15.4 Standard.

Core Processor and Memories

• 50 MHz Cortex-M4 CPU with DSP capabilities

• Up to 512 KB of flash memory

• Up to 64 KB of SRAM

Typical Applications

• Smart Energy 1.x

• ZigBee Home Automation

• ZigBee Healthcare

• ZigBee RF4CE

• ZigBee Light Link

• Thread

• Home Area Networks consisting of

• Meters

• Gateways

• In-home displays

• Connected appliances

• Networked Building Control and Home Automations

with

• Lighting Control

• HVAC

• Security

Peripherals

• USB

• Cryptographic Acceleration

• 16-bit ADC

• 12-bit DAC

• Flexible timers

Radio transceiver performance

• Up to –102 dBm receiver sensitivity

• +8 dBm maximum transmit output power

• Up to 58 dBm channel rejection

• Current consumption is minimized with peak

transmit current of 17 mA at 0 dBm output power,

and peak receive current of 15 mA in Low Power

Preamble Search mode.

Package and Operating Characteristics

• Packaged in an 8 x 8 mm LGA with 56 contacts

• Voltage range: 1.8 V to 3.6 V

• Ambient temperature range: –40°C to 105°C

MKW2xDxxxVHA5

64 LQFP

8.0x8.0x0.91 mm P 0.5 mm

NXP Semiconductors MKW2xDxxx

Data Sheet: Technical Data Rev. 2, 05/2016

NXP reserves the right to change the production detail specifications as may be

Ordering Information

Device

Operatin

g Temp

Range

(TA)

Package Memory

Options Description

MKW21D256VHA5(R) -40 to

105°C

8x8 LGA (R: tape

and reel)

32 KB

SRAM,

256 KB

flash

Additional FlexMemory with up to 64 KB FlexNVM and

up to 4 KB FlexRAM. No USB.

MKW21D512VHA5(R) -40 to

105°C

8x8 LGA (R: tape

and reel)

64 KB

SRAM,

512 KB

flash

Supports higher memory option and additional GPIO.

No USB. No FlexNVM or FlexRAM.

MKW22D512VHA5(R) -40 to

105°C

8x8 LGA (R: tape

and reel)

64 KB

SRAM,

512 KB

flash

Supports full speed USB 2.0. No FlexNVM or

FlexRAM.

MKW24D512VHA5(R) -40 to

105°C

8x8 LGA (R: tape

and reel)

64 KB

SRAM,

512 KB

flash

Supports Smart Energy 2.0 and full-speed USB 2.0.

No FlexNVM or FlexRAM.

Related Resources

Type Description Resource

Selector

Guide

The Kinetis MCUs Product Selector is a web-based tool that features

interactive application wizards and a dynamic product selector.

Product Selector

Fact Sheet The Fact Sheet gives overview of the product key features and its uses. KW2X Fact Sheet

Reference

Manual

The Reference Manual contains a comprehensive description of the

structure and function (operation) of a device.

MKW2xDRM1

Data Sheet The Data Sheet includes electrical characteristics and signal

connections.

This document.

Package

drawing

Package dimensions are provided in package drawings. 98ASA00393D1

1. To find the associated resource, go to http://www.nxp.com and perform a search using this term.

2MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table of Contents

1 Features.............................................................................. 4

1.1 Block diagram............................................................ 4

1.2 Radio features............................................................4

1.3 Microcontroller features............................................. 5

2 Transceiver description....................................................... 8

2.1 Key specifications...................................................... 8

2.2 RF interface and usage..............................................9

2.2.1 Clock output feature.......................................9

2.3 Transceiver functions.................................................10

2.3.1 Receive..........................................................10

2.3.2 Transmit.........................................................10

2.3.3 Clear channel assessment (CCA), energy

detection (ED), and link quality indicator

(LQI)...............................................................11

2.3.4 Packet processor........................................... 12

2.3.5 Packet buffering.............................................13

2.4 Dual PAN ID...............................................................14

3 System and power management.........................................15

3.1 Modes of operation.................................................... 15

3.2 Power management...................................................15

4 Radio Peripherals................................................................16

4.1 Clock output (CLK_OUT)...........................................16

4.2 General-purpose input output (GPIO)........................16

4.3 Serial peripheral interface (SPI).................................18

4.3.1 Features.........................................................18

4.4 Antenna diversity....................................................... 19

4.5 RF Output Power Distribution.................................... 19

5 MKW2xD operating modes................................................. 20

5.1 Transceiver Transmit Current Distribution................. 21

6 MKW2xD electrical characteristics......................................22

6.1 Radio recommended operating conditions................ 22

6.2 Ratings.......................................................................23

6.2.1 Thermal handling ratings............................... 23

6.2.2 Moisture handling ratings...............................23

6.2.3 ESD handling ratings..................................... 23

6.2.4 Voltage and current operating ratings............24

7 MCU Electrical characteristics.............................................24

7.1 Maximum ratings........................................................24

7.2 AC electrical characteristics.......................................25

7.3 Nonswitching electrical specifications........................26

7.3.1 Voltage and current operating requirements..26

7.3.2 LVD and POR operating requirements.......... 27

7.3.3 Voltage and current operating behaviors.......28

7.3.4 Power mode transition operating behaviors...28

7.3.5 Power consumption operating behaviors.......29

7.3.6 EMC radiated emissions operating

behaviors....................................................... 33

7.3.7 Designing with radiated emissions in mind.... 34

7.3.8 Capacitance attributes................................... 34

7.4 Switching specifications.............................................34

7.4.1 Device clock specifications............................ 34

7.4.2 General switching specifications....................35

7.5 Thermal specifications............................................... 36

7.5.1 Thermal operating requirements....................36

7.5.2 Thermal attributes..........................................36

7.6 Peripheral operating requirements and behaviors.....37

7.6.1 Core modules.................................................37

7.6.2 System modules............................................ 40

7.6.3 Clock modules............................................... 40

7.6.4 Memories and memory interfaces..................45

7.6.5 Security and integrity modules.......................49

7.6.6 Analog............................................................50

7.6.7 Timers............................................................57

7.6.8 Communication interfaces............................. 57

8 Transceiver Electrical Characteristics................................. 66

8.1 DC electrical characteristics.......................................66

8.2 AC electrical characteristics.......................................67

8.3 SPI timing: R_SSEL_B to R_SCLK........................... 68

8.4 SPI timing: R_SCLK to R_MOSI and R_MISO..........69

9 Crystal oscillator reference frequency.................................69

9.1 Crystal oscillator design considerations.....................69

9.2 Crystal requirements..................................................69

10 Pin diagrams and pin assignments..................................... 71

10.1 MKW21D256/MKW21D512 Pin Assignment............. 71

10.2 MKW22/24D512V Pin Assignment............................ 72

10.3 Pin assignments.........................................................72

11 Dimensions..........................................................................76

11.1 Obtaining package dimensions..................................76

12 Revision History.................................................................. 77

MKW2xD Data Sheet, Rev. 2, 05/2016 3

NXP Semiconductors

1 Features

This section provides a simplified block diagram and highlights the device features.

1.1 Block diagram

Core

ARM® CortexTM –M4

50 MHz

Debug

Interfaces

Interrupt Controller

DSP

System Memories RF Transceiver

Internal and

External

Watchdogs

DMA

Low‐Leakage

Wake‐up Unit

Program Flash

(up to 512 KB)

FlexNVM

64 KB

4 KB FlexRAM

MKW21D256 only

SRAM

(up to 64 KB)

IEEE 802.15.4 2006

2.4 GHz

Antenna Diversity

32 MHz

OSC

Dual

PAN ID

SPI

Clocks

Phase‐Locked

Loop

Communication Interfaces

I2C USB On‐the‐Go

(HS)

Low/High

Frequency

Oscillators

UART

(ISO 7816)

USB Device

Charger Detect

(DCD)

Internal

Reference

Clocks

SPI USB Voltage

Regulator

Frequency

Locked Loop

Timers

FlexTimer

Periodic Interrupt

Timers

Low‐Power

Timer

Programmable

Delay Block

Independent

Real‐Time

Clock (RTC)

Analog

16‐bit

ADC

High‐Speed

Comparator

with 6‐bit

DAC

Security

and Integrity

Cyclic

Redundancy

Check (CRC)

Cryptography

Authentication

Unit

Random Number

Generator

Tamper Detect

Standard Feature Optional

Figure 1. MKW2xD simplified block diagram

1.2 Radio features

• Fully compliant 802.15.4 Standard transceiver supports 250 kbps data rate with O-

QPSK modulation in 5.0 MHz channels with direct sequence spread-spectrum

(DSSS) encode and decode

Features

4MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

• Operates on one of 16 selectable channels in the 2.4 GHz frequency ISM band

• Programmable output power

• Supports 2.36 to 2.4 GHz Medical Band (MBAN) frequencies with same

modulation as IEEE 802.15.4

• Hardware acceleration for IEEE® 802.15.4 2006 packet processing

• Random number generator

• Support for dual PAN mode

• 32 MHz crystal reference oscillator with on board trim capability to supplement

external load capacitors

• Programmable frequency clock output (CLK_OUT)

• Control port for Antenna Diversity mode

• Clocks

• 32 MHz crystal oscillator

• Internal 1 kHz low power oscillator

• DC to 32 MHz external square wave input clock

• Small RF footprint

• Differential input/output port used with external balun

• Integrated transmit/receive switch

• Supports single ended and antenna diversity options

• Low external components count

• Supports external PA and LNA

1.3 Microcontroller features

• Core:

• ARM Cortex-M4 Core at 50 MHz (1.25 MIPS/MHz)

• Supports DSP instructions

Features

MKW2xD Data Sheet, Rev. 2, 05/2016 5

NXP Semiconductors

• Nested vectored interrupt controller (NVIC)

• Asynchronous wake-up interrupt controller (AWIC)

• Debug and trace capability

• 2-pin serial wire debug (SWD)

• IEEE 1149.1 Joint Test Action Group (JTAG)

• IEEE 1149.7 compact JTAG (cJTAG)

• Trace port interface unit (TPIU)

• Flash patch and breakpoint (FPB)

• Data watchpoint and trace (DWT)

• Instrumentation trace macrocell (ITM)

• Enhanced trace macrocell (ETM)

• System and power management:

• Software and hardware watchdog with external monitor pin

• DMA controller with 16 channels

• Low-leakage wake-up unit (LLWU)

• Power management controller with 10 different power modes

• Non-maskable interrupt (NMI)

• 128-bit unique identification (ID) number per chip

• Memories and memory interfaces:

• Up to 512 KB Program Flash

• Up to 64 KB of SRAM

• In MKW21D256, FlexMemory with up to 64 KB FlexNVM and up to 4 KB

FlexRAM can be partitioned.

• EEPROM has endurance of 10 million cycles over full voltage and temperature

range and read-while-write capability

• Flash security and protection features

• Serial flash programming interface (EzPort)

Features

6MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

• Clocks

• Multi-purpose clock generator

• PLL and FLL operation

• Internal reference clocks (32 kHz or 2 MHz)

• Three separate crystal oscillators

• 3 MHz to 32 MHz crystal oscillator for MCU

• 32 kHz to 40 kHz crystal oscillator for MCU or RTC

• 32 MHz crystal oscillator for Radio

• Internal 1 kHz low power oscillator

• DC to 50 MHz external square wave input clock

• Security and integrity

• Hardware CRC module to support fast cyclic redundancy checks

• Tamper detect and secure storage

• Hardware random-number generator

• Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and

SHA-256 algorithms

• 128-bit unique identification (ID) number per chip

• Analog

• 16-bit SAR ADC

• High-speed Analog comparator (CMP) with 6-bit DAC

• Timers

• Up to 12 channels; 7 channels support external connections; 5 channels are

internal only

• Carrier modulator timer (CMT)

• Programmable delay block (PDB)

• 1x4ch programmable interrupt timer (PIT)

Features

MKW2xD Data Sheet, Rev. 2, 05/2016 7

NXP Semiconductors

• Low-power timer (LPT)

• FlexTimers that support general-purpose PWM for motor control functions

• Communications

• One SPI

• Two I2C with SMBUS support

• Three UARTs (w/ ISO7816, IrDA, and hardware flow control)

• One USB On-The-Go Full Speed

• Human-machine interface

• GPIO with pin interrupt support, DMA request capability, digital glitch filter,

and other pin control options

• Operating characteristics

• Voltage range 1.8 V - 3.6 V

• Flash memory programming down to 1.8 V

• Temperature range (TA) -40 to 105°C

Transceiver description

2.1 Key specifications

MKW2xD meets or exceeds all IEEE 802.15.4 performance specifications applicable to

2.4 GHz ISM and MBAN (Medical Band Area Network) bands. Key specifications for

MKW2xD are:

• ISM band:

• RF operating frequency: 2405 MHz to 2480 MHz (center frequency range)

• 5 MHz channel spacing

• MBAN band:

• RF operating frequency: 2360 MHz to 2400 MHz (center frequency range)

• MBAN channel page 9 is (2360 MHz-2390 MHz band)

Transceiver description

8MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

• Fc = 2363.0 + 1.0 * k in MHz for k = 0, 1, 2, ...26

• MBAN channel page 10 is (2390 MHz-2400 MHz band)

• Fc = 2390.0 + 1.0 * k in MHz for k = 0, 1, 2, ...8

• IEEE 802.15.4 Standard 2.4 GHz modulation scheme

• Chip rate: 2000 kbps

• Data rate: 250 kbps

• Symbol rate: 62.5 kbps

• Modulation: OQPSK

• Receiver sensitivity: -102 dBm, typical (@1% PER for 20 byte payload packet)

• Differential bidirectional RF input/output port with integrated transmit/receive

switch

• Programmable output power from -35 dBm to +8 dBm.

2.2 RF interface and usage

The MKW2xD RF output ports are bidirectional (diplexed between receive/transmit

modes) and differential enabling interfaces with numerous off-chip devices such as a

balun. When using a balun, this device provides an interface to directly connect

between a single-ended antenna and the MKW2xD RF ports. In addition, MKW2xD

provides four output driver ports that can have both drive strength and slew rate

configured to control external peripheral devices. These signals designated as

ANT_A, ANT_B, RX_SWITCH, and TX_SWITCH when enabled are switched via

an internal hardware state machine. These ports provide control features for peripheral

devices such as:

• Antenna diversity modules

• External PAs

• External LNAs

• T/R switches

Transceiver description

MKW2xD Data Sheet, Rev. 2, 05/2016 9

NXP Semiconductors

2.2.1 Clock output feature

The CLK_OUT digital output can be enabled to drive the system clock to the MCU.

This provides a highly accurate clock source based on the transceiver reference

oscillator. The clock is programmable over a wide range of frequencies divided down

from the reference 32 MHz (see Table 2). The CLK_OUT pin will be enabled upon

POR. The frequency CLK_OUT default to 4 MHz (32 MHz/8).

Transceiver functions

2.3.1 Receive

The receiver has the functionality to operate in either normal run state or low power run

state that can be considered as a partial power down mode. Low power run state can

save a considerable amount of current by duty-cycling some sections of the receiver

lineup during preamble search and is referred to as Low Power Preamble Search mode

(LPPS).

The radio receiver path is based upon a near zero IF (NZIF) architecture incorporating

front end amplification, one mixed signal down conversion to IF that is programmably

filtered, demodulated and digitally processed. The RF front end (FE) input port is

differential that shares the same off chip matching network with the transmit path.

2.3.2 Transmit

MKW2xD transmits OQPSK modulation having power and channel selection

adjustment per user application. After the channel of operation is determined, coarse

and fine tuning is executed within the Frac-N PLL to engage signal lock. After signal

lock is established, the modulated buffered signal is then routed to a multi-stage

amplifier for transmission. The differential signals at the output of the PA (RFOUTP,

RFOUTN) are converted as single ended (SE) signals with off chip components as

required.

2.3

Transceiver functions

10 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

2.3.3 Clear channel assessment (CCA), energy detection (ED), and

link quality indicator (LQI)

The MKW2xD supports three clear channel assessment (CCA) modes of operation

including energy detection (ED) and link quality indicator (LQI). Functionality for

each of these modes is as follows.

2.3.3.1 CCA mode 1

CCA mode 1 has two functions:

• To estimate the energy in the received baseband signal. This energy is estimated

based on receiver signal strength indicator (RSSI).

• To determine whether the energy is greater than a set threshold.

The estimate of the energy can also be used as the Link Quality metric. In CCA Mode

1, the MKW2xD must warm up from Idle to Receive mode where RSSI averaging

takes place.

2.3.3.2 CCA mode 2

CCA mode 2 detects whether there is any 802.15.4 signal transmitting in the

frequency band that an 802.15.4 transmitter intends to transmit. From the definition of

CCA mode 2 in the 802.15.4 standard, the requirement is to detect an 802.15.4

complied signal. Whether the detected energy is strong or not is not important for

CCA mode 2.

2.3.3.3 CCA mode 3

CCA mode 3 as defined by 802.15.4 standard is implemented using a logical

combination of CCA mode 1 and CCA mode 2. Specifically, CCA mode 3 operates in

one of two operating modes:

• CCA mode 3 is asserted if both CCA mode 1 and CCA mode 2 are asserted.

• CCA mode 3 is asserted if either CCA mode 1 or CCA mode 2 is asserted.

This mode setting is available through a programmable register.

Transceiver functions

MKW2xD Data Sheet, Rev. 2, 05/2016 11

NXP Semiconductors

2.3.3.4 Energy detection (ED)

Energy detection (ED) is based on receiver signal strength indicator (RSSI) and

correlator output for the 802.15.4 standard. ED is an average value of signal strength.

The magnitude from this measurement is calculated from the digital RSSI value that is

averaged over a 128 μs duration.

2.3.3.5 Link quality indicator (LQI)

Link quality indicator (LQI) is based on receiver signal strength indicator (RSSI) or

correlator output for the 802.15.4 standard. In this mode, the RSSI measurement is done

during normal packet reception. LQI computations for the MKW2xD are based on

either digital RSSI or correlator peak values. This setting is executed through a register

bit where the final LQI value is available 64 μs after preamble is detected. If a

continuous update of LQI based on RSSI throughout the packet is desired, it can be read

in a separate 8-bit register by enabling continuous update in a register bit.

2.3.4 Packet processor

The MKW2xD packet processor performs sophisticated hardware filtering of the

incoming received packet to determine if the packet is both PHY- and MAC-compliant,

is addressed to this device, if the device is a PAN coordinator and whether a message is

pending for the sending device. The packet processor greatly reduces the packet

filtering burden on software allowing it to tend to higher-layer tasks with a lower

latency and smaller software footprint.

2.3.4.1 Features

• Aggressive packet filtering to enable long, uninterrupted MCU sleep periods

• Fully compliant with both 2003 and 2006 versions of the 802.15.4 wireless

standard

• Supports all frame types, including reserved types

• Supports all valid 802.15.4 frame lengths

• Enables auto-Tx acknowledge frames (no MCU intervention) by parsing of frame

control field and sequence number

• Supports all source and destination address modes, and also PAN ID compression

• Supports broadcast address for PAN ID and short address mode

Transceiver functions

12 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

• Supports “promiscuous” mode, to receive all packets regardless of address- and

rules-checking

• Allows frame type-specific filtering (e.g., reject all but beacon frames)

• Supports SLOTTED and non-SLOTTED modes

• Includes special filtering rules for PAN coordinator devices

• Enables minimum-turnaround Tx-acknowledge frames for data-polling requests

by automatically determining message-pending status

• Assists MCU in locating pending messages in its indirect queue for data-polling

end devices

• Makes available to MCU detailed status of frames that fail address- or rules-

checking.

• Supports Dual PAN mode, allowing the device to exist on 2 PAN's

simultaneously

• Supports 2 IEEE addresses for the device

• Supports active promiscuous mode

2.3.5 Packet buffering

The packet buffer is a 128-byte random access memory (RAM) dedicated to the

storage of 802.15.4 packet contents for both TX and RX sequences. For TX

sequences, software stores the contents of the packet buffer starting with the frame

length byte at packet buffer address 0 followed by the packet contents at the

subsequent packet buffer addresses. For RX sequences the incoming packet's frame

length is stored in a register external to the packet buffer. Software will read this

DMA transfer through the SPI. For receive packets, an LQI byte is stored at the byte

immediately following the last byte of the packet (frame length +1). Usage of the

packet buffer for RX and TX sequences is on a time-shared basis; receive packet data

will overwrite the contents of the packet buffer. Software can inhibit receive-packet

overwriting of the packet buffer contents by setting the PB_PROTECT bit. This will

block RX packet overwriting, but will not inhibit TX content loading of the packet

buffer via the SPI.

Transceiver functions

MKW2xD Data Sheet, Rev. 2, 05/2016 13

NXP Semiconductors

2.3.5.1 Features

• 128 byte buffer stores maximum length 802.15.4 packets

• Same buffer serves both TX and RX sequences

• The entire Packet Buffer can be uploaded or downloaded in a single SPI burst.

• Automatic address auto-incrementing for burst accesses

• Single-byte access mode supported.

• Entire packet buffer can be accessed in hibernate mode

• Under-run error interrupt supported

2.4 Dual PAN ID

In the past, radio transceivers designed for IEEE 802.15.4 applications allowed a device

to associate to one and only one PAN (Personal Area Network) at any given time. The

MKW2xD represents a high-performance SiP that includes hardware support for a

device to reside in two networks simultaneously. In optional Dual PAN mode, the

device alternates between the two (2) PANs under hardware or software control.

Hardware support for Dual PAN operation consists of two (2) sets of PAN and IEEE

addresses for the device, two (2) different channels (one for each PAN) and a

programmable timer to automatically switch PANs (including on-the-fly channel

changing) without software intervention. There are control bits to configure and enable

Dual PAN mode, and read only bits to monitor status in Dual PAN mode. A device can

be configured to be a PAN coordinator on either network, both networks or neither.

For the purpose of defining PAN in the context of Dual PAN mode, two (2) sets of

network parameters are maintained; PAN0 and PAN1. PAN0 and PAN1 will be used to

refer to the two (2) PANs where each parameter set uniquely identifies a PAN for Dual

PAN mode. These parameters are described in Table 1.

Table 1. PAN0 and PAN1 descriptions

PAN0 PAN1

Channel0 (PHY_INT0, PHY_FRAC0) Channel1 (PHY_INT1, PHY_FRAC1)

MacPANID0 (16-bit register) MacPANID1 (16-bit register)

MacShortAddrs0 (16-bit register) MacShortAddrs1 (16-bit register)

MacLongAddrs0 (64-bit registers) MacLongAddrs1 (64-bit registers)

PANCORDNTR0 (1-bit register) PANCORDNTR1 (1-bit register)

Transceiver functions

14 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

During device initialization if Dual PAN mode is used, software will program both

parameter sets to configure the hardware for operation on two (2) networks.

3 System and power management

The MKW2xD is a low power device that also supports extensive system control and

power management modes to maximize battery life and provide system protection.

3.1 Modes of operation

The transceiver modes of operation include:

• Idle mode

• Doze mode

• Low power (LP) / hibernate mode

• Reset / powerdown mode

• Run mode

3.2 Power management

The MKW2xD power management is controlled through programming the modes of

operation. Different modes allow for different levels of power-down and RUN

operation. For the receiver, programmable power modes available are:

• Preamble search

• Preamble search sniff

• Low Power Preamble Search (LPPS)

• Fast Antenna Diversity (FAD) Preamble search

• Packet decoding

System and power management

MKW2xD Data Sheet, Rev. 2, 05/2016 15

NXP Semiconductors

4 Radio Peripherals

The MKW2xD provides a set of I/O pins useful for suppling a system clock to the

MCU, controlling external RF modules/circuitry, and GPIO.

4.1 Clock output (CLK_OUT)

MKW2xD integrates a programmable clock to source numerous frequencies for

connection with various MCUs. Package pin 39 can be used to provide this clock source

as required allowing the user to make adjustments per their application requirement.

The transceiver CLK_OUT pin is internally connected to the MCU EXTAL pin so that

no external connection is needed to drive the MCU clock.

Care must be taken that the clock output signal does not interfere with the reference

oscillator or the radio. Additional functionality this feature supports is:

• XTAL domain can be completely gated off (hibernate mode)

• SPI communication allowed in hibernate

Table 2. CLK_OUT

CLK_OUT_DIV [2:0] CLK_OUT frequency

0 32 MHz1

1 16 MHz1

2 8 MHz1

3 4 MHz

4 2 MHz

5 1 MHz

6 62.5 kHz

7 32.786 kHz

1. May require high drive strength for proper signal integrity.

There is an enable/disable bit for CLK_OUT. When disabling, the clock output will

optionally continue to run for 128 clock cycles after disablement. There is also be one

(1) bit available to adjust the CLK_OUT I/O pad drive strength.

Radio Peripherals

16 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

4.2 General-purpose input output (GPIO)

In addition to the MCU supported GPIOs, the radio supports 2 GPIO pins. All I/O

pins will have the same supply voltage and depending on the supply, can vary from

1.8 V up to 3.6 V. When the pin is configured as a general-purpose output or for

peripheral use, there will be specific settings required per use case. Pin configuration

will be executed by software to adjust input/output direction and drive strength,

capability. When the pin is configured as a general-purpose input or for peripheral

use, software (see Table 3) can enable a pull-up or pull-down device. Immediately

after reset, all pins are configured as high-impedance general-purpose inputs with

internal pull-up devices enabled.

Features for these pins include:

• Programmable output drive strength

• Programmable output slew rate

• Hi-Z mode

• Programmable as outputs or inputs (default)

Table 3. Pin configuration summary

Pin function configuration Details Tolerance Units

Min. Typ. Max.

I/O buffer full drive mode1Source or sink — ±10 — mA

I/O buffer partial drive mode1Source or sink — ±2 — mA

I/O buffer high impedance2Off state — — 10 nA

No slew, full drive Rise and fall time32 4 6 ns

No slew, partial drive Rise and fall time 2 4 6 ns

Slew, full drive Rise and fall time 6 12 24 ns

Slew, partial drive Rise and fall time 6 12 24 ns

Propagation delay4, no slew Full drive5— — 11 ns

Propagation delay, no slew Partial drive6— — 11 ns

Propagation delay, slew Full drive — — 50 ns

Propagation delay, slew Partial drive — — 50 ns

1. For this drive condition, the output voltage will not deviate more than 0.5 V from the rail reference VOH or VOL.

2. Leakage current applies for the full range of possible input voltage conditions.

3. Rise and fall time values in reference to 20% and 80%

4. Propagation Delay measured from/to 50% voltage point.

5. Full drive values provided are in reference to a 75 pF load.

6. Partial drive values provided are in reference to a 15 pF load.

Radio Peripherals

MKW2xD Data Sheet, Rev. 2, 05/2016 17

NXP Semiconductors

4.3 Serial peripheral interface (SPI)

The MKW2xD SiP uses a SPI interface allowing the MCU to communicate with the

radio's register set and packet buffer. The SPI is a slave-only interface; the MCU must

drive R_SSEL_B, R_SCLK and R_MOSI. Write and read access to both direct and

indirect registers is supported, and transfer length can be single-byte or bursts of

unlimited length. Write and read access to the Packet buffer can also be single-byte or a

burst mode of unlimited length.

The SPI interface is asynchronous to the rest of the IC. No relationship between

R_SCLK and MKW2xD's internal oscillator is assumed. And no relationship between

R_SCLK and the CLK_OUT pin is assumed. All synchronization of the SPI interface to

the IC takes place inside the SPI module. SPI synchronization takes place in both

directions; register writes and register reads. The SPI is capable of operation in all

power modes, except Reset. Operation in hibernate mode allows most transceiver

registers and the complete packet buffer to be accessed in the lowest-power operating

state enabling minimal power consumption, especially during the register-initialization

phase of the radio.

The SPI design features a compact, single-byte control word, reducing SPI access

latency to a minimum. Most SPI access types require only a single-byte control word,

with the address embedded in the control word. During control word transfer (the first

byte of any SPI access), the contents of the IRQSTS1 register (MKW2xD radio's

highest-priority status register) are always shifted out so that the MCU gets access to

IRQSTS1, with the minimum possible latency, on every SPI access.

4.3.1 Features

• 4-wire industry standard interface, supported by all MCUs

• SPI R_SCLK maximum frequency 16 MHz (for SPI write accesses)

• SPI R_SCLK maximum frequency 9 MHz (for SPI read accesses)

• Write and read access to all radio registers (direct and indirect)

• Write and read access to packet buffer

• SPI accesses can be single-byte or burst

• Automatic address auto-incrementing for burst accesses

Radio Peripherals

18 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

• The entire packet buffer can be uploaded or downloaded in a single SPI burst

• Entire packet buffer and most registers can be accessed in hibernate mode

• Built-in synchronization inside the SPI module to/from the rest of the radio

4.4 Antenna diversity

To improve the reliability of RF connectivity to long range applications, the antenna

diversity feature is supported without using the MCU through use of four dedicated

control pins (package pins 44, 45, 46, and 47).

Fast antenna diversity (FAD) mode supports this radio feature and, when enabled, will

allow the choice of selection between two antennas during the preamble phase. By

continually monitoring the received signal, the FAD block will select the first antenna

of which the received signal has a correlation factor above a predefined progammable

threshold. The FAD accomplishes the antenna selection by sequentially switching

between the two antennas testing for the presence of suitably strong s0 symbol where

the first antenna to reach this condition is then selected for the reception of the packet.

The antenna's are monitored for a period of 28 μs each. The antenna switching is

continued until 1.5 valid s0 symbols are detected. The demodulator then continues

with normal preamble search before declaring “Preamble Detect”.

4.5 RF Output Power Distribution

The following figure shows the linear region of the output and the typical power

distribution of the radio as a function of PA_PWR [4:0] range. The PA_PWR [4:0] is

the lower 5 bits of the PA_PWR 0x23 direct register and has a usable range of 3 to 31

decimal.

Radio Peripherals

MKW2xD Data Sheet, Rev. 2, 05/2016 19

NXP Semiconductors

Figure 2. MKW2xD transmit power vs. PA_PWR step

5MKW2xD operating modes

For the discussion of this topic, the primary radio and MCU operating modes are

combined so that overall power consumption can then be derived. Depending on the

stop requirements of the user application, a variety of stop modes are available that

provide state retention, partial power down or full power down of certain logic and/or

memory. I/O states are held in all modes of operation. Both the radio and MCU's power

modes are described as follows.

The radio has 6 primary operating modes:

• Reset / power down

• Low power (LP) / hibernate

• Doze (low power with reference oscillator active)

MKW2xD operating modes

20 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

• Idle

• Receive

• Transmit

Table 4 lists and describes the transceivers power modes and consumption.

Table 4. Transceiver Power Modes

Mode Definition Current

consumption1

Reset /

powerdow

All IC functions off, leakage only. RST asserted. < 100 nA

Low

power /

hibernate

Crystal reference oscillator off. (SPI is functional.) < 1 μA

Doze2Crystal reference oscillator on but CLK_OUT output available only if selected. 500 μA3

(no CLK_OUT)

Idle Crystal reference oscillator on with CLK_OUT output available only if selected. 700 μA3

(no CLK_OUT)

Receive Crystal reference oscillator on. Receiver on. < 19.5 mA 4

15 mA, LPPS

mode

Transmit Crystal reference oscillator on. Transmitter on. < 18 mA 5

1. Conditions: VBAT and VBAT_2 = 2.7 V, nominal process @ 25°C

2. While in Doze mode, 4 MHz max frequency can be selected for CLK_OUT.

3. Typical

4. Signal sensitivity = -102 dBm

5. RF output = 0 dBm

The MCU has a variety of operating modes. For each run mode there is a

corresponding wait and stop mode. Wait modes are similar to ARM sleep modes. Stop

modes (VLPS, STOP) are similar to ARM sleep deep mode. The very low power run

(VLPR) operating mode can drastically reduce runtime power when the maximum bus

frequency is not required to handle the application needs.

The three primary modes of operation are run, wait and stop. The WFI instruction

invokes both wait and stop modes for the chip. The primary modes are augmented in a

number of ways to provide lower power based on application needs.

MKW2xD operating modes

MKW2xD Data Sheet, Rev. 2, 05/2016 21

NXP Semiconductors

5.1 Transceiver Transmit Current Distribution

The following figure shows the relation between the transmit power generated by the

radio and its current consumption.

Figure 3. MKW2xD transmit power vs transmit current (Radio Only)

MKW2xD electrical characteristics

6.1 Radio recommended operating conditions

Table 5. Recommended operating conditions

Characteristic Symbol Min Typ Max Unit

Power Supply Voltage (VBAT = VDDINT) VBAT, VDDINT 1.8 2.7 3.6 Vdc

Input Frequency fin 2.360 — 2.480 GHz

Ambient Temperature Range TA -40 25 105 °C

Table continues on the next page...

MKW2xD electrical characteristics

22 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 5. Recommended operating conditions (continued)

Characteristic Symbol Min Typ Max Unit

Logic Input Voltage Low VIL 0 — 30%

VDDINT

Logic Input Voltage High VIH 70%

VDDINT

— VDDINT V

SPI Clock Rate fSPI — — 16.0 MHz

RF Input Power Pmax — — 10 dBm

Crystal Reference Oscillator Frequency (±40 ppm over

operating conditions to meet the 802.15.4 Standard.)

fref 32 MHz only

Ratings

6.2.1 Thermal handling ratings

Symbol Description Min. Max. Unit Notes

TSTG Storage temperature –55 150 °C 1

TSDR Solder temperature, lead-free — 260 °C 2

1. Determined according to JEDEC Standard JESD22-A103, High Temperature Storage Life.

2. Determined according to IPC/JEDEC Standard J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic

Solid State Surface Mount Devices.

6.2.2 Moisture handling ratings

Symbol Description Min. Max. Unit Notes

MSL Moisture sensitivity level — 3 — 1

1. Determined according to IPC/JEDEC Standard J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic

Solid State Surface Mount Devices.

6.2.3 ESD handling ratings

Symbol Description Min. Max. Unit Notes

VHBM Electrostatic discharge voltage, human body model -2000 +2000 V 1

VCDM Electrostatic discharge voltage, charged-device

model

-500 +500 V 2

Table continues on the next page...

6.2

Ratings

MKW2xD Data Sheet, Rev. 2, 05/2016 23

NXP Semiconductors

Symbol Description Min. Max. Unit Notes

ILAT Latch-up current at ambient temperature of 105°C -100 +100 mA 3

1. Determined according to JEDEC Standard JESD22-A114, Electrostatic Discharge (ESD) Sensitivity Testing Human

Body Model (HBM).

2. Determined according to JEDEC Standard JESD22-C101, Field-Induced Charged-Device Model Test Method for

Electrostatic-Discharge-Withstand Thresholds of Microelectronic Components.

3. Determined according to JEDEC Standard JESD78, IC Latch-Up Test.

6.2.4 Voltage and current operating ratings

Symbol Description Min. Max. Unit

VDD Digital supply voltage –0.3 3.6 V

IDD Digital supply current — 155 mA

VDIO Digital input voltage (except RESET, EXTAL, and XTAL) –0.3 VDD + 0.3 V

VAIO Analog1, RESET, EXTAL, and XTAL input voltage –0.3 VDD + 0.3 V

IDMaximum current single pin limit (applies to all digital pins) –25 25 mA

VDDA Analog supply voltage VDD – 0.3 VDD + 0.3 V

VUSB0_DP USB0_DP input voltage –0.3 3.63 V

VUSB0_DM USB0_DM input voltage –0.3 3.63 V

1. Analog pins are defined as pins that do not have an associated general purpose I/O port function.

MCU Electrical characteristics

7.1 Maximum ratings

Table 6. Maximum ratings

Requirement Description Symbol Rating level Unit

Power Supply Voltage VBAT, VBAT2 -0.3 to 3.6 Vdc

Digital Input Voltage Vin -0.3 to (VDDINT + 0.3) Vdc

RF Input Power Pmax +10 dBm

Note: Maximum ratings are those values beyond which damage to the device may occur. Functional operation should be

restricted to the limits in the electrical characteristics or recommended operating conditions tables.

ESD1

Human Body

Model

HBM ±2000 Vdc

Machine Model MM ±200 Vdc

Table continues on the next page...

MCU Electrical characteristics

24 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 6. Maximum ratings (continued)

Requirement Description Symbol Rating level Unit

Charged Device

Model

CDM ±750 Vdc

EMC2

Power Electro-

Static

Discharge /

Direct Contact PESD

No damage / latch up to ±4000

Vdc

No soft failure / reset to ±1000

Power Electro-

Static

Discharge /

Indirect Contact

No damage / latch up to ±6000

Vdc

No soft failure / reset to ±1000

Langer IC / EFT /

P201 EFT (Electro

Magnetic Fast

Transient)

No damage / latch up to ±5 Vdc

No soft failure / reset to ±5

Langer IC / EFT /

P201

No damage / latch up to ±300 Vdc

No soft failure / reset to ±150

Junction Temperature TJ+125 °C

Storage Temperature Range Tstg -65 to +165 °C

1. Electrostatic discharge on all device pads meet this requirement

2. Electromagnetic compatibility for this product is low stress rating level

Note

Maximum ratings are those values beyond which damage to

the device may occur. Functional operation should be

restricted to the limits in the electrical characteristics or

recommended operating conditions tables.

7.2 AC electrical characteristics

Unless otherwise specified, propagation delays are measured from the 50% to the 50%

point, and rise and fall times are measured at the 20% and 80% points, as shown in the

following figure.

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 25

NXP Semiconductors

80%

20%

50%

VIL

Input Signal

VIH

Fall Time

High

Low

Rise Time

Midpoint1

The midpoint is VIL + (VIH - VIL) / 2

Figure 4. Input signal measurement reference

7.3 Nonswitching electrical specifications

7.3.1 Voltage and current operating requirements

Table 7. Voltage and current operating requirements

Symbol Description Min. Max. Unit Notes

VDD Supply voltage 1.8 3.6 V

VDDA Analog supply voltage 1.8 3.6 V

VDD – VDDA VDD-to-VDDA differential voltage –0.1 0.1 V

VSS – VSSA VSS-to-VSSA differential voltage –0.1 0.1 V

VBAT RTC battery supply voltage 1.8 3.6 V

VIH Input high voltage

• 2.7 V ≤ VDD ≤ 3.6 V

• 1.7 V ≤ VDD ≤ 2.7 V

0.7 × VDD

0.75 × VDD

—

VIL Input low voltage

• 2.7 V ≤ VDD ≤ 3.6 V

• 1.7 V ≤ VDD ≤ 2.7 V

—

0.35 × VDD

0.3 × VDD

VHYS Input hysteresis 0.06 × VDD — V

IICIO I/O pin DC injection current — single pin

• VIN < VSS-0.3V (Negative current injection)

• VIN > VDD+0.3V (Positive current injection)

-3

—

IICcont Contiguous pin DC injection current —regional limit,

includes sum of negative injection currents or sum of

positive injection currents of 16 contiguous pins

• Negative current injection

• Positive current injection

-25

—

+25

Table continues on the next page...

MCU Electrical characteristics

26 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 7. Voltage and current operating requirements (continued)

Symbol Description Min. Max. Unit Notes

VRAM VDD voltage required to retain RAM 1.2 — V

VRFVBAT VBAT voltage required to retain the VBAT register file VPOR_VBAT — V

1. All analog pins are internally clamped to VSS and VDD through ESD protection diodes. If VIN is less than VAIO_MIN or

greater than VAIO_MAX, a current limiting resistor is required. The negative DC injection current limiting resistor is

calculated as R=(VAIO_MIN-VIN)/|IICAIO|. The positive injection current limiting resistor is calculated as R=(VIN-

VAIO_MAX)/|IICAIO|. Select the larger of these two calculated resistances if the pin is exposed to positive and negative

injection currents.

7.3.2 LVD and POR operating requirements

Table 8. VDD supply LVD and POR operating requirements

Symbol Description Min. Typ. Max. Unit Notes

VPOR Falling VDD POR detect voltage 0.8 1.1 1.5 V

VLVDH Falling low-voltage detect threshold — high

range (LVDV=01)

2.48 2.56 2.64 V

VLVW1H

VLVW2H

VLVW3H

VLVW4H

Low-voltage warning thresholds — high range

• Level 1 falling (LVWV=00)

• Level 2 falling (LVWV=01)

• Level 3 falling (LVWV=10)

• Level 4 falling (LVWV=11)

2.62

2.72

2.82

2.92

2.70

2.80

2.90

3.00

2.78

2.88

2.98

3.08

VHYSH Low-voltage inhibit reset/recover hysteresis —

high range

— 80 — mV

VLVDL Falling low-voltage detect threshold — low

range (LVDV=00)

1.54 1.60 1.66 V

VLVW1L

VLVW2L

VLVW3L

VLVW4L

Low-voltage warning thresholds — low range

• Level 1 falling (LVWV=00)

• Level 2 falling (LVWV=01)

• Level 3 falling (LVWV=10)

• Level 4 falling (LVWV=11)

1.74

1.84

1.94

2.04

1.80

1.90

2.00

2.10

1.86

1.96

2.06

2.16

VHYSL Low-voltage inhibit reset/recover hysteresis —

low range

— 60 — mV

VBG Bandgap voltage reference 0.97 1.00 1.03 V

tLPO Internal low power oscillator period — factory

trimmed

900 1000 1100 μs

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 27

NXP Semiconductors

1. Rising threshold is the sum of falling threshold and hysteresis voltage

Table 9. VBAT power operating requirements

Symbol Description Min. Typ. Max. Unit Notes

VPOR_VBAT Falling VBAT supply POR detect voltage 0.8 1.1 1.5 V

7.3.3 Voltage and current operating behaviors

Table 10. Voltage and current operating behaviors

Symbol Description Min. Max. Unit Notes

VOH Output high voltage — high drive strength

• 2.7 V ≤ VDD ≤ 3.6 V, IOH = - 9 mA

• 1.71 V ≤ VDD ≤ 2.7 V, IOH = -3 mA

VDD – 0.5

—

Output high voltage — low drive strength

• 2.7 V ≤ VDD ≤ 3.6 V, IOH = -2 mA

• 1.71 V ≤ VDD ≤ 2.7 V, IOH = -0.6 mA

VDD – 0.5

—

IOHT Output high current total for all ports — 100 mA

VOL Output low voltage — high drive strength

• 2.7 V ≤ VDD ≤ 3.6 V, IOL = 9 mA

• 1.71 V ≤ VDD ≤ 2.7 V, IOL = 3 mA

—

0.5

Output low voltage — low drive strength

• 2.7 V ≤ VDD ≤ 3.6 V, IOL = 2 mA

• 1.71 V ≤ VDD ≤ 2.7 V, IOL = 0.6 mA

—

0.5

IOLT Output low current total for all ports — 100 mA

IIN Input leakage current (per pin)

• @ full temperature range

• @ 25 °C

—

1.0

0.1

μA

IOZ Hi-Z (off-state) leakage current (per pin) — 1 μA

IOZ Total Hi-Z (off-state) leakage current (all input pins) — 4 μA

RPU Internal pullup resistors 22 50 kΩ 2

RPD Internal pulldown resistors 22 50 kΩ 3

1. Tested by ganged leakage method

2. Measured at Vinput = VSS

3. Measured at Vinput = VDD

MCU Electrical characteristics

28 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

7.3.4 Power mode transition operating behaviors

All specifications except tPOR, and VLLSx→RUN recovery times in the following

table assume this clock configuration:

• CPU and system clocks = 50 MHz

• Bus clock = 50 MHz

• Flash clock = 25 MHz

• MCG mode: FEI

Table 11. Power mode transition operating behaviors

Symbol Description Min. Max. Unit Notes

tPOR After a POR event, amount of time from the point

VDD reaches 1.71 V to execution of the first

instruction across the operating temperature range

of the chip.

• 1.71 V/(VDD slew rate) ≤ 300 μs

• 1.71 V/(VDD slew rate) > 300 μs

—

300

1.7 V / (VDD

slew rate)

μs 1

• VLLS1 → RUN — 150 μs

• VLLS2 → RUN — 79 μs

• VLLS3 → RUN — 79 μs

• LLS → RUN — 6 μs

• VLPS → RUN — 5.2 μs

• STOP → RUN — 5.2 μs

1. Normal boot (FTFL_OPT[LPBOOT]=1)

7.3.5 Power consumption operating behaviors

Table 12. Power consumption operating behaviors

Symbol Description Min. Typ. Max. Unit Notes

IDDA Analog supply current — — See note mA 1

IDD_RUN Run mode current — all peripheral clocks

disabled, code executing from flash

• @ 1.8 V

• @ 3.0 V

—

12.98

12.93

13.8

Table continues on the next page...

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 29

NXP Semiconductors

Table 12. Power consumption operating behaviors (continued)

Symbol Description Min. Typ. Max. Unit Notes

IDD_RUN Run mode current — all peripheral clocks

enabled, code executing from flash

• @ 1.8 V

• @ 3.0 V

• @ 25°C

• @ 125°C

—

17.04

17.01

19.8

19.3

18.9

21.3

3, 4

IDD_WAIT Wait mode high frequency current at 3.0 V —

all peripheral clocks disabled

— 7.95 9.5 mA 2

IDD_WAIT Wait mode reduced frequency current at 3.0 V

— all peripheral clocks disabled

— 5.88 7.4 mA 5

IDD_STOP Stop mode current at 3.0 V

• @ –40 to 25°C

• @ 50°C

• @ 70°C

• @ 105°C

—320

360

410

610

436

489

620

1100

μA

IDD_VLPR Very-low-power run mode current at 3.0 V —

all peripheral clocks disabled

— 754 — μA 6

IDD_VLPR Very-low-power run mode current at 3.0 V —

all peripheral clocks enabled

— 1.1 — mA 7

IDD_VLPW Very-low-power wait mode current at 3.0 V — 437 — μA 8

IDD_VLPS Very-low-power stop mode current at 3.0 V

• @ –40 to 25°C

• @ 50°C

• @ 70°C

• @ 105°C

—7.33

110

24.2

280

μA

IDD_LLS Low leakage stop mode current at 3.0 V

• @ –40 to 25°C

• @ 50°C

• @ 70°C

• @ 105°C

—3.14

6.48

13.85

55.53

4.8

28.3

44.6

71.3

μA

IDD_VLLS3 Very low-leakage stop mode 3 current at 3.0 V

• @ –40 to 25°C

• @ 50°C

• @ 70°C

• @ 105°C

— 2.19

4.35

8.92

35.33

3.4

4.35

24.6

45.3

μA

IDD_VLLS2 Very low-leakage stop mode 2 current at 3.0 V

• @ –40 to 25°C

• @ 50°C

• @ 70°C

• @ 105°C

—1.77

2.81

5.20

19.88

3.1

13.8

22.3

34.2

μA

IDD_VLLS1 Very low-leakage stop mode 1 current at 3.0 V

• @ –40 to 25°C

—1.03 1.8 μA

Table continues on the next page...

MCU Electrical characteristics

30 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 12. Power consumption operating behaviors (continued)

Symbol Description Min. Typ. Max. Unit Notes

• @ 50°C

• @ 70°C

• @ 105°C

1.92

4.03

17.43

7.5

15.9

28.7

IDD_VLLS0 Very low-leakage stop mode 0 current at 3.0 V

with POR detect circuit enabled

• @ –40 to 25°C

• @ 50°C

• @ 70°C

• @ 105°C

—0.543

1.36

3.39

16.52

1.1

7.58

14.3

24.1

μA

IDD_VLLS0 Very low-leakage stop mode 0 current at 3.0 V

with POR detect circuit disabled

• @ –40 to 25°C

• @ 50°C

• @ 70°C

• @ 105°C

—0.359

1.03

2.87

15.20

0.95

6.8

15.4

25.3

μA

IDD_VBAT Average current when CPU is not accessing

RTC registers at 3.0 V

• @ –40 to 25°C

• @ 50°C

• @ 70°C

• @ 105°C

—0.91

1.1

1.5

4.3

1.1

1.35

1.85

5.7

μA 9

1. The analog supply current is the sum of the active or disabled current for each of the analog modules on the device.

See each module's specification for its supply current.

2. 50 MHz core and system clock, 25 MHz bus clock, and 25 MHz flash clock. MCG configured for FEI mode. All

peripheral clocks disabled.

3. 50 MHz core and system clock, 25 MHz bus clock, and 25 MHz flash clock. MCG configured for FEI mode. All

peripheral clocks enabled, and peripherals are in active operation.

4. Max values are measured with CPU executing DSP instructions

5. 25 MHz core and system clock, 25 MHz bus clock, and 12.5 MHz flash clock. MCG configured for FEI mode.

6. 4 MHz core, system, and bus clock and 1 MHz flash clock. MCG configured for BLPE mode. All peripheral clocks

disabled. Code executing from flash.

7. 4 MHz core, system, and bus clock and 1 MHz flash clock. MCG configured for BLPE mode. All peripheral clocks

enabled but peripherals are not in active operation. Code executing from flash.

8. 4 MHz core, system, and bus clock and 1 MHz flash clock. MCG configured for BLPE mode. All peripheral clocks

disabled.

9. Includes 32 kHz oscillator current and RTC operation.

7.3.5.1 Diagram: Typical IDD_RUN operating behavior

The following data was measured under these conditions:

• MCG in FBE mode

• No GPIOs toggled

• Code execution from flash with cache enabled

• For the ALLOFF curve, all peripheral clocks are disabled except FTFL

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 31

NXP Semiconductors

Figure 5. Run mode supply current vs. core frequency

MCU Electrical characteristics

32 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Figure 6. VLPR mode supply current vs. core frequency

7.3.6 EMC radiated emissions operating behaviors

Table 13. EMC radiated emissions operating behaviors 1

Symbol Description Frequency

band

(MHz)

Typ. Unit Notes

VRE1 Radiated emissions voltage, band 1 0.15–50 19 dBμV 2, 3

VRE2 Radiated emissions voltage, band 2 50–150 21 dBμV

VRE3 Radiated emissions voltage, band 3 150–500 19 dBμV

VRE4 Radiated emissions voltage, band 4 500–1000 11 dBμV

VRE_IEC IEC level 0.15–1000 L — 3, 4

1. This data was collected on a MK20DN128VLH5 64pin LQFP device.

2. Determined according to IEC Standard 61967-1, Integrated Circuits - Measurement of Electromagnetic Emissions,

150 kHz to 1 GHz Part 1: General Conditions and Definitions and IEC Standard 61967-2, Integrated Circuits -

Measurement of Electromagnetic Emissions, 150 kHz to 1 GHz Part 2: Measurement of Radiated Emissions—TEM

Cell and Wideband TEM Cell Method. Measurements were made while the microcontroller was running basic

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 33

NXP Semiconductors

application code. The reported emission level is the value of the maximum measured emission, rounded up to the next

whole number, from among the measured orientations in each frequency range.

3. VDD = 3.3 V, TA = 25 °C, fOSC = 12 MHz (crystal), fSYS = 48 MHz, fBUS = 48MHz

4. Specified according to Annex D of IEC Standard 61967-2, Measurement of Radiated Emissions—TEM Cell and

Wideband TEM Cell Method

7.3.7 Designing with radiated emissions in mind

To find application notes that provide guidance on designing your system to minimize

interference from radiated emissions:

• Go to www.nxp.com.

• Perform a keyword search for “EMC design.”

7.3.8 Capacitance attributes

Table 14. Capacitance attributes

Symbol Description Min. Max. Unit

CIN_A Input capacitance: analog pins — 7 pF

CIN_D Input capacitance: digital pins — 7 pF

7.4 Switching specifications

7.4.1 Device clock specifications

Table 15. Device clock specifications

Symbol Description Min. Max. Unit Notes

Normal run mode

fSYS System and core clock — 50 MHz

System and core clock when Full Speed USB in

operation

20 — MHz

fBUS Bus clock — 50 MHz

fFLASH Flash clock — 25 MHz

fLPTMR LPTMR clock — 25 MHz

VLPR mode1

fSYS System and core clock — 4 MHz

fBUS Bus clock — 4 MHz

Table continues on the next page...

MCU Electrical characteristics

34 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 15. Device clock specifications (continued)

Symbol Description Min. Max. Unit Notes

fFLASH Flash clock — 1 MHz

fERCLK External reference clock — 16 MHz

fLPTMR_pin LPTMR clock — 25 MHz

fLPTMR_ERCLK LPTMR external reference clock — 16 MHz

fI2S_MCLK I2S master clock — 12.5 MHz

fI2S_BCLK I2S bit clock — 4 MHz

1. The frequency limitations in VLPR mode here override any frequency specification listed in the timing specification for

any other module.

7.4.2 General switching specifications

These general purpose specifications apply to all pins configured for:

• GPIO signaling

• Other peripheral module signaling not explicitly stated elsewhere

Table 16. General switching specifications

Symbol Description Min. Max. Unit Notes

GPIO pin interrupt pulse width (digital glitch filter

disabled) — Synchronous path

1.5 — Bus clock

cycles

1, 2

GPIO pin interrupt pulse width (digital glitch filter

disabled, analog filter enabled) — Asynchronous

path

100 — ns 3

GPIO pin interrupt pulse width (digital glitch filter

disabled, analog filter disabled) — Asynchronous

path

50 — ns 3

External reset pulse width (digital glitch filter

disabled)

100 — ns 3

Port rise and fall time (high drive strength)

• Slew disabled

• 1.71 ≤ VDD ≤ 2.7V

• 2.7 ≤ VDD ≤ 3.6V

• Slew enabled

• 1.71 ≤ VDD ≤ 2.7V

• 2.7 ≤ VDD ≤ 3.6V

—

Port rise and fall time (low drive strength)

• Slew disabled

—

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 35

NXP Semiconductors

Table 16. General switching specifications

Symbol Description Min. Max. Unit Notes

• 1.71 ≤ VDD ≤ 2.7V

• 2.7 ≤ VDD ≤ 3.6V

• Slew enabled

• 1.71 ≤ VDD ≤ 2.7V

• 2.7 ≤ VDD ≤ 3.6V

—

1. This is the minimum pulse width that is guaranteed to pass through the pin synchronization circuitry. Shorter pulses may

or may not be recognized. In Stop, VLPS, LLS, and VLLSx modes, the synchronizer is bypassed so shorter pulses can

be recognized in that case.

2. The greater synchronous and asynchronous timing must be met.

3. This is the minimum pulse width that is guaranteed to be recognized as a pin interrupt request in Stop, VLPS, LLS, and

VLLSx modes.

4. 75 pF load

5. 15 pF load

7.5 Thermal specifications

7.5.1 Thermal operating requirements

Table 17. Thermal operating requirements

Symbol Description Min. Max. Unit

TJDie junction temperature –40 125 °C

TAAmbient temperature1–40 105 °C

1. Maximum TA can be exceeded only if the user ensures that TJ does not exceed maximum TJ. The simplest method to

determine TJ is:

TJ = TA + RθJA x chip power dissipation

7.5.2 Thermal attributes

Board type Symbol Description 80 LQFP Unit Notes

Single-layer (1s) RθJA Thermal

resistance,

junction to ambient

(natural

convection)

50 °C/W 1, 2

Four-layer (2s2p) RθJA Thermal

resistance,

junction to ambient

35 °C/W 1, 3

Table continues on the next page...

MCU Electrical characteristics

36 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Board type Symbol Description 80 LQFP Unit Notes

(natural

convection)

Single-layer (1s) RθJMA Thermal

resistance,

junction to ambient

(200 ft./min. air

speed)

39 °C/W 1,3

Four-layer (2s2p) RθJMA Thermal

resistance,

junction to ambient

(200 ft./min. air

speed)

29 °C/W 1,3

— RθJB Thermal

resistance,

junction to board

19 °C/W 4

— RθJC Thermal

resistance,

junction to case

8 °C/W 5

—ΨJT Thermal

characterization

parameter,

junction to

package top

outside center

(natural

convection)

2 °C/W 6

1. Junction temperature is a function of die size, on-chip power dissipation, package thermal resistance, mounting site

(board) temperature, ambient temperature, air flow, power dissipation of other components on the board, and board

thermal resistance.

2. Determined according to JEDEC Standard JESD51-2, Integrated Circuits Thermal Test Method Environmental

Conditions—Natural Convection (Still Air) with the single layer board horizontal. For the LQFP, the board meets the

JESD51-3 specification. For the MAPBGA, the board meets the JESD51-9 specification.

3. Determined according to JEDEC Standard JESD51-6, Integrated Circuits Thermal Test Method Environmental

Conditions—Forced Convection (Moving Air) with the board horizontal.

4. Determined according to JEDEC Standard JESD51-8, Integrated Circuit Thermal Test Method Environmental

Conditions—Junction-to-Board. Board temperature is measured on the top surface of the board near the package.

5. Determined according to Method 1012.1 of MIL-STD 883, Test Method Standard, Microcircuits, with the cold plate

temperature used for the case temperature. The value includes the thermal resistance of the interface material

between the top of the package and the cold plate.

6. Determined according to JEDEC Standard JESD51-2, Integrated Circuits Thermal Test Method Environmental

Conditions—Natural Convection (Still Air).

7.6 Peripheral operating requirements and behaviors

7.6.1 Core modules

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 37

NXP Semiconductors

7.6.1.1 JTAG electricals

Table 18. JTAG limited voltage range electricals

Symbol Description Min. Max. Unit

Operating voltage 2.7 3.6 V

J1 TCLK frequency of operation

• Boundary Scan

• JTAG and CJTAG

• Serial Wire Debug

MHz

J2 TCLK cycle period 1/J1 — ns

J3 TCLK clock pulse width

• Boundary Scan

• JTAG and CJTAG

• Serial Wire Debug

—

J4 TCLK rise and fall times — 3 ns

J5 Boundary scan input data setup time to TCLK rise 20 — ns

J6 Boundary scan input data hold time after TCLK rise 0 — ns

J7 TCLK low to boundary scan output data valid — 25 ns

J8 TCLK low to boundary scan output high-Z — 25 ns

J9 TMS, TDI input data setup time to TCLK rise 8 — ns

J10 TMS, TDI input data hold time after TCLK rise 1 — ns

J11 TCLK low to TDO data valid — 17 ns

J12 TCLK low to TDO high-Z — 17 ns

J13 TRST assert time 100 — ns

J14 TRST setup time (negation) to TCLK high 8 — ns

Table 19. JTAG full voltage range electricals

Symbol Description Min. Max. Unit

Operating voltage 1.8 3.6 V

J1 TCLK frequency of operation

• Boundary Scan

• JTAG and CJTAG

• Serial Wire Debug

MHz

J2 TCLK cycle period 1/J1 — ns

J3 TCLK clock pulse width

• Boundary Scan

• JTAG and CJTAG

• Serial Wire Debug

12.5

—

Table continues on the next page...

MCU Electrical characteristics

38 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 19. JTAG full voltage range electricals (continued)

Symbol Description Min. Max. Unit

J4 TCLK rise and fall times — 3 ns

J5 Boundary scan input data setup time to TCLK rise 20 — ns

J6 Boundary scan input data hold time after TCLK rise 0 — ns

J7 TCLK low to boundary scan output data valid — 25 ns

J8 TCLK low to boundary scan output high-Z — 25 ns

J9 TMS, TDI input data setup time to TCLK rise 8 — ns

J10 TMS, TDI input data hold time after TCLK rise 1.4 — ns

J11 TCLK low to TDO data valid — 22.1 ns

J12 TCLK low to TDO high-Z — 22.1 ns

J13 TRST assert time 100 — ns

J14 TRST setup time (negation) to TCLK high 8 — ns

J3 J3

J4 J4

TCLK (input)

Figure 7. Test clock input timing

J5 J6

Input data valid

Output data valid

TCLK

Data inputs

Data outputs

Figure 8. Boundary scan (JTAG) timing

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 39

NXP Semiconductors

J11

J12

J11

J9 J10

Input data valid

Output data valid

TCLK

TDI/TMS

TDO

Figure 9. Test Access Port timing

J14

J13

TCLK

TRST

Figure 10. TRST timing

7.6.2 System modules

There are no specifications necessary for the device's system modules.

7.6.3 Clock modules

MCU Electrical characteristics

40 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

7.6.3.1 MCG specifications

Table 20. MCG specifications

Symbol Description Min. Typ. Max. Unit Notes

fints_ft Internal reference frequency (slow clock) —

factory trimmed at nominal VDD and 25 °C

— 32.768 — kHz

fints_t Internal reference frequency (slow clock) —

user trimmed

31.25 — 39.0625 kHz

Δfdco_res_t Resolution of trimmed average DCO output

frequency at fixed voltage and temperature —

using SCTRIM and SCFTRIM

— ± 0.3 ± 0.6 %fdco 1

Δfdco_res_t Resolution of trimmed average DCO output

frequency at fixed voltage and temperature —

using SCTRIM only

— ± 0.2 ± 0.5 %fdco 1

Δfdco_t Total deviation of trimmed average DCO output

frequency over voltage and temperature

— +0.5/-0.7 ± 2 %fdco 1, 2

Δfdco_t Total deviation of trimmed average DCO output

frequency over fixed voltage and temperature

range of 0–70°C

— ± 0.3 ±1 %fdco 1, 2

fintf_ft Internal reference frequency (fast clock) —

factory trimmed at nominal VDD and 25°C

— 4 — MHz

fintf_t Internal reference frequency (fast clock) —

user trimmed at nominal VDD and 25 °C

3 — 5 MHz

floc_low Loss of external clock minimum frequency —

RANGE = 00

(3/5) x

fints_t

— — kHz

floc_high Loss of external clock minimum frequency —

RANGE = 01, 10, or 11

(16/5) x

fints_t

— — kHz

FLL

ffll_ref FLL reference frequency range 31.25 — 39.0625 kHz

fdco DCO output

frequency range

Low range (DRS=00)

640 × ffll_ref

20 20.97 25 MHz 3, 4

Mid range (DRS=01)

1280 × ffll_ref

40 41.94 50 MHz

Mid-high range (DRS=10)

1920 × ffll_ref

60 62.91 75 MHz

High range (DRS=11)

2560 × ffll_ref

80 83.89 100 MHz

fdco_t_DMX3

DCO output

frequency

Low range (DRS=00)

732 × ffll_ref

— 23.99 — MHz 5,6

Mid range (DRS=01)

1464 × ffll_ref

— 47.97 — MHz

Mid-high range (DRS=10)

2197 × ffll_ref

— 71.99 — MHz

High range (DRS=11) — 95.98 — MHz

Table continues on the next page...

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 41

NXP Semiconductors

Table 20. MCG specifications (continued)

Symbol Description Min. Typ. Max. Unit Notes

2929 × ffll_ref

Jcyc_fll FLL period jitter

• fDCO = 48 MHz

• fDCO = 98 MHz

—

180

150

—

tfll_acquire FLL target frequency acquisition time — — 1 ms 7

PLL

fvco VCO operating frequency 48.0 — 100 MHz

Ipll PLL operating current

• PLL @ 96 MHz (fosc_hi_1 = 8 MHz, fpll_ref

= 2 MHz, VDIV multiplier = 48)

— 1200 — µA 8

Ipll PLL operating current

• PLL @ 48 MHz (fosc_hi_1 = 8 MHz, fpll_ref

= 2 MHz, VDIV multiplier = 24)

— 700 — µA 8

fpll_ref PLL reference frequency range 2.0 — 4.0 MHz

Jcyc_pll PLL period jitter (RMS)

• fvco = 48 MHz

• fvco = 100 MHz

—

120

—

Jacc_pll PLL accumulated jitter over 1µs (RMS)

• fvco = 48 MHz

• fvco = 100 MHz

—

1350

600

—

Dlock Lock entry frequency tolerance ± 1.49 — ± 2.98 %

Dunl Lock exit frequency tolerance ± 4.47 — ± 5.97 %

tpll_lock Lock detector detection time — — 150 × 10-6

+ 1075(1/

fpll_ref)

s10

1. This parameter is measured with the internal reference (slow clock) being used as a reference to the FLL (FEI clock

mode).

2. 2 V <= VDD <= 3.6 V.

3. These typical values listed are with the slow internal reference clock (FEI) using factory trim and DMX32=0.

4. The resulting system clock frequencies should not exceed their maximum specified values. The DCO frequency

deviation (Δfdco_t) over voltage and temperature should be considered.

5. These typical values listed are with the slow internal reference clock (FEI) using factory trim and DMX32=1.

6. The resulting clock frequency must not exceed the maximum specified clock frequency of the device.

7. This specification applies to any time the FLL reference source or reference divider is changed, trim value is changed,

DMX32 bit is changed, DRS bits are changed, or changing from FLL disabled (BLPE, BLPI) to FLL enabled (FEI, FEE,

FBE, FBI). If a crystal/resonator is being used as the reference, this specification assumes it is already running.

8. Excludes any oscillator currents that are also consuming power while PLL is in operation.

9. This specification was obtained using a Freescale developed PCB. PLL jitter is dependent on the noise characteristics of

each PCB and results will vary.

10. This specification applies to any time the PLL VCO divider or reference divider is changed, or changing from PLL

disabled (BLPE, BLPI) to PLL enabled (PBE, PEE). If a crystal/resonator is being used as the reference, this

specification assumes it is already running.

MCU Electrical characteristics

42 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

7.6.3.2 Oscillator electrical specifications

7.6.3.2.1 Oscillator DC electrical specifications

Table 21. Oscillator DC electrical specifications

Symbol Description Min. Typ. Max. Unit Notes

VDD Supply voltage 1.8 — 3.6 V

IDDOSC Supply current — low-power mode (HGO=0)

• 32 kHz

• 4 MHz

• 8 MHz (RANGE=01)

• 16 MHz

• 24 MHz

• 32 MHz

—

500

200

300

950

1.2

1.5

—

μA

IDDOSC Supply current — high-gain mode (HGO=1)

• 32 kHz

• 4 MHz

• 8 MHz (RANGE=01)

• 16 MHz

• 24 MHz

• 32 MHz

—

500

600

2.5

—

μA

CxEXTAL load capacitance — — — 2, 3

CyXTAL load capacitance — — — 2, 3

RFFeedback resistor — low-frequency, low-power

mode (HGO=0)

— — — MΩ 2, 4

Feedback resistor — low-frequency, high-gain

mode (HGO=1)

— 10 — MΩ

Feedback resistor — high-frequency, low-

power mode (HGO=0)

— — — MΩ

Feedback resistor — high-frequency, high-gain

mode (HGO=1)

— 1 — MΩ

RSSeries resistor — low-frequency, low-power

mode (HGO=0)

— — — kΩ

Series resistor — low-frequency, high-gain

mode (HGO=1)

— 200 — kΩ

Series resistor — high-frequency, low-power

mode (HGO=0)

— — — kΩ

Series resistor — high-frequency, high-gain

mode (HGO=1)

—

kΩ

Table continues on the next page...

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 43

NXP Semiconductors

Table 21. Oscillator DC electrical specifications (continued)

Symbol Description Min. Typ. Max. Unit Notes

Vpp5Peak-to-peak amplitude of oscillation (oscillator

mode) — low-frequency, low-power mode

(HGO=0)

— 0.6 — V

Peak-to-peak amplitude of oscillation (oscillator

mode) — low-frequency, high-gain mode

(HGO=1)

— VDD — V

Peak-to-peak amplitude of oscillation (oscillator

mode) — high-frequency, low-power mode

(HGO=0)

— 0.6 — V

Peak-to-peak amplitude of oscillation (oscillator

mode) — high-frequency, high-gain mode

(HGO=1)

— VDD — V

1. VDD=3.3 V, Temperature =25 °C

2. See crystal or resonator manufacturer's recommendation

3. Cx and Cy can be provided by using either integrated capacitors or external components.

4. When low-power mode is selected, RF is integrated and must not be attached externally.

5. The EXTAL and XTAL pins should only be connected to required oscillator components and must not be connected to

any other device.

7.6.3.2.2 Oscillator frequency specifications

Table 22. Oscillator frequency specifications

Symbol Description Min. Typ. Max. Unit Notes

fosc_lo Oscillator crystal or resonator frequency — low-

frequency mode (MCG_C2[RANGE]=00)

32 — 40 kHz

fosc_hi_1 Oscillator crystal or resonator frequency — high-

frequency mode (low range)

(MCG_C2[RANGE]=01)

3 — 8 MHz

fosc_hi_2 Oscillator crystal or resonator frequency — high

frequency mode (high range)

(MCG_C2[RANGE]=1x)

8 — 32 MHz

fec_extal Input clock frequency (external clock mode) — — 50 MHz 1, 2

tdc_extal Input clock duty cycle (external clock mode) 40 50 60 %

tcst Crystal startup time — 32 kHz low-frequency,

low-power mode (HGO=0)

— 750 — ms 3, 4

Crystal startup time — 32 kHz low-frequency,

high-gain mode (HGO=1)

— 250 — ms

Crystal startup time — 8 MHz high-frequency

(MCG_C2[RANGE]=01), low-power mode

(HGO=0)

— 0.6 — ms

Crystal startup time — 8 MHz high-frequency

(MCG_C2[RANGE]=01), high-gain mode

(HGO=1)

— 1 — ms

1. Other frequency limits may apply when external clock is being used as a reference for the FLL or PLL.

MCU Electrical characteristics

44 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

2. When transitioning from FEI or FBI to FBE mode, restrict the frequency of the input clock so that, when it is divided by

FRDIV, it remains within the limits of the DCO input clock frequency.

3. Proper PC board layout procedures must be followed to achieve specifications.

4. Crystal startup time is defined as the time between the oscillator being enabled and the OSCINIT bit in the MCG_S

NOTE

The 32 kHz oscillator works in low power mode by default

and cannot be moved into high power/gain mode.

7.6.3.3 32 kHz oscillator electrical characteristics

7.6.3.3.1 32 kHz oscillator DC electrical specifications

Table 23. 32kHz oscillator DC electrical specifications

Symbol Description Min. Typ. Max. Unit

VBAT Supply voltage 1.8 — 3.6 V

RFInternal feedback resistor — 100 — MΩ

Cpara Parasitical capacitance of EXTAL32 and

XTAL32

— 5 7 pF

Vpp1Peak-to-peak amplitude of oscillation — 0.6 — V

1. When a crystal is being used with the 32 kHz oscillator, the EXTAL32 and XTAL32 pins should only be connected to

required oscillator components and must not be connected to any other devices.

7.6.3.3.2 32 kHz oscillator frequency specifications

Table 24. 32 kHz oscillator frequency specifications

Symbol Description Min. Typ. Max. Unit Notes

fosc_lo Oscillator crystal — 32.768 — kHz

tstart Crystal start-up time — 1000 — ms 1

vec_extal32 Externally provided input clock amplitude 700 — VBAT mV 2, 3

1. Proper PC board layout procedures must be followed to achieve specifications.

2. This specification is for an externally supplied clock driven to EXTAL32 and does not apply to any other clock input.

The oscillator remains enabled and XTAL32 must be left unconnected.

3. The parameter specified is a peak-to-peak value and VIH and VIL specifications do not apply. The voltage of the

applied clock must be within the range of VSS to VBAT.

7.6.4 Memories and memory interfaces

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 45

NXP Semiconductors

7.6.4.1 Flash electrical specifications

This section describes the electrical characteristics of the flash memory module.

7.6.4.1.1 Flash timing specifications — program and erase

The following specifications represent the amount of time the internal charge pumps are

active and do not include command overhead.

Table 25. NVM program/erase timing specifications

Symbol Description Min. Typ. Max. Unit Notes

thvpgm4 Longword Program high-voltage time — 7.5 18 μs —

thversscr Sector Erase high-voltage time — 13 113 ms 1

thversblk256k Erase Block high-voltage time for 256 KB — 104 904 ms 1

1. Maximum time based on expectations at cycling end-of-life.

7.6.4.1.2 Flash timing specifications — commands

Table 26. Flash command timing specifications

Symbol Description Min. Typ. Max. Unit Notes

trd1blk64k

trd1blk256k

Read 1s Block execution time

• 64 KB data flash

• 256 KB program flash

—

0.9

1.7

trd1sec2k Read 1s Section execution time (flash sector) — — 60 μs 1

tpgmchk Program Check execution time — — 45 μs 1

trdrsrc Read Resource execution time — — 30 μs 1

tpgm4 Program Longword execution time — 65 145 μs —

tersblk64k

tersblk256k

Erase Flash Block execution time

• 64 KB data flash

• 256 KB program flash

—

122

580

985

tersscr Erase Flash Sector execution time — 14 114 ms 2

tpgmsec512

tpgmsec1k

tpgmsec2k

Program Section execution time

• 512 bytes flash

• 1 KB flash

• 2 KB flash

—

2.4

4.7

9.3

—

trd1all Read 1s All Blocks execution time — — 1.8 ms 1

trdonce Read Once execution time — — 25 μs 1

Table continues on the next page...

MCU Electrical characteristics

46 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 26. Flash command timing specifications (continued)

Symbol Description Min. Typ. Max. Unit Notes

tpgmonce Program Once execution time — 65 — μs —

tersall Erase All Blocks execution time — 250 2000 ms 2

tvfykey Verify Backdoor Access Key execution time — — 30 μs 1

tswapx01

tswapx02

tswapx04

tswapx08

Swap Control execution time

• control code 0x01

• control code 0x02

• control code 0x04

• control code 0x08

—

200

—

150

μs

—

tpgmpart64k

Program Partition for EEPROM execution time

• 64 KB FlexNVM

—

138

—

tsetramff

tsetram32k

tsetram64k

Set FlexRAM Function execution time:

• Control Code 0xFF

• 32 KB EEPROM backup

• 64 KB EEPROM backup

—

0.8

1.3

—

1.2

1.9

μs

—

Byte-write to FlexRAM for EEPROM operation

teewr8bers Byte-write to erased FlexRAM location

execution time

— 175 260 μs 3

teewr8b32k

teewr8b64k

Byte-write to FlexRAM execution time:

• 32 KB EEPROM backup

• 64 KB EEPROM backup

—

385

475

1800

2000

μs

—

Word-write to FlexRAM for EEPROM operation

teewr16bers Word-write to erased FlexRAM location

execution time

— 175 260 μs —

teewr16b32k

teewr16b64k

Word-write to FlexRAM execution time:

• 32 KB EEPROM backup

• 64 KB EEPROM backup

—

385

475

1800

2000

μs

—

Longword-write to FlexRAM for EEPROM operation

teewr32bers Longword-write to erased FlexRAM location

execution time

— 360 540 μs —

teewr32b32k

teewr32b64k

Longword-write to FlexRAM execution time:

• 32 KB EEPROM backup

• 64 KB EEPROM backup

—

630

810

2050

2250

μs

—

1. Assumes 25 MHz flash clock frequency.

2. Maximum times for erase parameters based on expectations at cycling end-of-life.

3. For byte-writes to an erased FlexRAM location, the aligned word containing the byte must be erased.

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 47

NXP Semiconductors

7.6.4.1.3 Flash high voltage current behaviors

Table 27. Flash high voltage current behaviors

Symbol Description Min. Typ. Max. Unit

IDD_PGM Average current adder during high voltage

flash programming operation

— 2.5 6.0 mA

IDD_ERS Average current adder during high voltage

flash erase operation

— 1.5 4.0 mA

7.6.4.1.4 Reliability specifications

Table 28. NVM reliability specifications

Symbol Description Min. Typ.1Max. Unit Notes

Program Flash

tnvmretp10k Data retention after up to 10 K cycles 5 50 — years —

tnvmretp1k Data retention after up to 1 K cycles 20 100 — years —

nnvmcycp Cycling endurance 10 K 50 K — cycles 2

Data Flash

tnvmretd10k Data retention after up to 10 K cycles 5 50 — years —

tnvmretd1k Data retention after up to 1 K cycles 20 100 — years —

nnvmcycd Cycling endurance 10 K 50 K — cycles 2

FlexRAM as EEPROM

tnvmretee100 Data retention up to 100% of write endurance 5 50 — years —

tnvmretee10 Data retention up to 10% of write endurance 20 100 — years —

nnvmwree16

nnvmwree128

nnvmwree512

nnvmwree4k

Write endurance

• EEPROM backup to FlexRAM ratio = 16

• EEPROM backup to FlexRAM ratio = 128

• EEPROM backup to FlexRAM ratio = 512

• EEPROM backup to FlexRAM ratio =

4096

35 K

315 K

1.27 M

10 M

175 K

1.6 M

6.4 M

50 M

—

writes

1. Typical data retention values are based on measured response accelerated at high temperature and derated to a

constant 25 °C use profile. Engineering Bulletin EB618 does not apply to this technology. Typical endurance defined in

Engineering Bulletin EB619.

2. Cycling endurance represents number of program/erase cycles at –40 °C ≤ Tj ≤ °C.

3. Write endurance represents the number of writes to each FlexRAM location at –40 °C ≤Tj ≤ °C influenced by the cycling

endurance of the FlexNVM (same value as data flash) and the allocated EEPROM backup per subsystem. Minimum and

typical values assume all byte-writes to FlexRAM.

MCU Electrical characteristics

48 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

7.6.4.2 EzPort switching specifications

Table 29. EzPort switching specifications

Num Description Min. Max. Unit

Operating voltage 1.8 3.6 V

EP1 EZP_CK frequency of operation (all commands except

READ)

— fSYS/2 MHz

EP1a EZP_CK frequency of operation (READ command) — fSYS/8 MHz

EP2 EZP_CS negation to next EZP_CS assertion 2 x tEZP_CK — ns

EP3 EZP_CS input valid to EZP_CK high (setup) 5 — ns

EP4 EZP_CK high to EZP_CS input invalid (hold) 5 — ns

EP5 EZP_D input valid to EZP_CK high (setup) 2 — ns

EP6 EZP_CK high to EZP_D input invalid (hold) 5 — ns

EP7 EZP_CK low to EZP_Q output valid — ns

EP8 EZP_CK low to EZP_Q output invalid (hold) 0 — ns

EP9 EZP_CS negation to EZP_Q tri-state — 12 ns

EP2

EP3 EP4

EP5 EP6

EP7 EP8

EP9

EZP_CK

EZP_CS

EZP_Q (output)

EZP_D (input)

Figure 11. EzPort Timing Diagram

7.6.5 Security and integrity modules

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 49

NXP Semiconductors

7.6.5.1 DryIce Tamper Electrical Specifications

Information about security-related modules is not included in this document and is

available only after a nondisclosure agreement (NDA) has been signed. To request an

NDA, contact your local NXP sales representative.

7.6.6 Analog

7.6.6.1 ADC electrical specifications

The 16-bit accuracy specifications listed in Table 1 and Table 31 are achievable on the

differential pins ADCx_DP0, ADCx_DM0.

All other ADC channels meet the 13-bit differential/12-bit single-ended accuracy

specifications.

7.6.6.1.1 16-bit ADC operating conditions

Table 30. 16-bit ADC operating conditions

Symbol Description Conditions Min. Typ.1Max. Unit Notes

VDDA Supply voltage Absolute 1.8 — 3.6 V

ΔVDDA Supply voltage Delta to VDD (VDD – VDDA) -100 0 +100 mV 2

ΔVSSA Ground voltage Delta to VSS (VSS – VSSA) -100 0 +100 mV 2

VREFH ADC reference

voltage high

Absolute VDDA VDDA VDDA V3

VREFL ADC reference

voltage low

Absolute VSSA VSSA VSSA V4

VADIN Input voltage • 16-bit differential mode

• All other modes

VREFL

—

31/32 *

VREFH

CADIN Input

capacitance

• 16-bit mode

• 8-bit / 10-bit / 12-bit

modes

—

RADIN Input series

resistance

— 2 5 kΩ

RAS Analog source

resistance

(external)

13-bit / 12-bit modes

fADCK < 4 MHz

—

kΩ

fADCK ADC conversion

clock frequency

≤ 13-bit mode 1.0 — 18.0 MHz 6

Table continues on the next page...

MCU Electrical characteristics

50 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 30. 16-bit ADC operating conditions (continued)

Symbol Description Conditions Min. Typ.1Max. Unit Notes

fADCK ADC conversion

clock frequency

16-bit mode 2.0 — 12.0 MHz 6

Crate ADC conversion

rate

≤ 13-bit modes

No ADC hardware averaging

Continuous conversions

enabled, subsequent

conversion time

20.000

—

818.330

Ksps

Crate ADC conversion

rate

16-bit mode

No ADC hardware averaging

Continuous conversions

enabled, subsequent

conversion time

37.037

—

461.467

Ksps

1. Typical values assume VDDA = 3.0 V, Temp = 25 °C, fADCK = 1.0 MHz, unless otherwise stated. Typical values are for

reference only, and are not tested in production.

2. DC potential difference.

3. VREFH is internally tied to VDDA.

4. VREFL is internally tied to VSSA.

5. This resistance is external to MCU. To achieve the best results, the analog source resistance must be kept as low as

possible. The results in this data sheet were derived from a system that had < 8 Ω analog source resistance. The

RAS/CAS time constant should be kept to < 1 ns.

6. To use the maximum ADC conversion clock frequency, CFG2[ADHSC] must be set and CFG1[ADLPC] must be clear.

7. For guidelines and examples of conversion rate calculation, download the ADC calculator tool.

RAS

VAS CAS

ZAS

VADIN

ZADIN

RADIN

CADIN

Pad

leakage

due to

input

protection

INPUT PIN

SIMPLIFIED

INPUT PIN EQUIVALENT

CIRCUIT

SIMPLIFIED

CHANNEL SELECT

CIRCUIT

ADC SAR

ENGINE

Figure 12. ADC input impedance equivalency diagram

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 51

NXP Semiconductors

7.6.6.1.2 16-bit ADC electrical characteristics

Table 31. 16-bit ADC characteristics (VREFH = VDDA, VREFL = VSSA)

Symbol Description Conditions1Min. Typ.2Max. Unit Notes

IDDA_ADC Supply current 0.215 — 1.7 mA 3

fADACK

ADC asynchronous

clock source

• ADLPC = 1, ADHSC = 0

• ADLPC = 1, ADHSC = 1

• ADLPC = 0, ADHSC = 0

• ADLPC = 0, ADHSC = 1

1.2

2.4

3.0

4.4

2.4

4.0

5.2

6.2

3.9

6.1

7.3

9.5

MHz

tADACK = 1/

fADACK

Sample Time See Reference Manual chapter for sample times

TUE Total unadjusted

error

• 12-bit modes

• <12-bit modes

—

±4

±1.4

±6.8

±2.1

LSB45

DNL Differential non-

linearity

• 12-bit modes

• <12-bit modes

—

±0.7

±0.2

–1.1 to

+1.9

–0.3 to

0.5

LSB45

INL Integral non-linearity • 12-bit modes

• <12-bit modes

—

±1.0

±0.5

–2.7 to

+1.9

–0.7 to

+0.5

LSB45

EFS Full-scale error • 12-bit modes

• <12-bit modes

—

–4

–1.4

–5.4

–1.8

LSB4VADIN = VDDA5

EQQuantization error • 16-bit modes

• ≤13-bit modes

—

–1 to 0

—

±0.5

LSB4

ENOB Effective number of

bits

16-bit differential mode

• Avg = 32

• Avg = 4

16-bit single-ended mode

• Avg = 32

• Avg = 4

12.8

11.9

12.2

11.4

14.5

13.8

13.9

13.1

—

bits

SINAD Signal-to-noise plus

distortion

See ENOB 6.02 × ENOB + 1.76 dB

THD Total harmonic

distortion

16-bit differential mode

• Avg = 32

16-bit single-ended mode

—

-94

-85

—

Table continues on the next page...

MCU Electrical characteristics

52 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 31. 16-bit ADC characteristics (VREFH = VDDA, VREFL = VSSA) (continued)

Symbol Description Conditions1Min. Typ.2Max. Unit Notes

• Avg = 32

SFDR Spurious free

dynamic range

16-bit differential mode

• Avg = 32

16-bit single-ended mode

• Avg = 32

—

EIL Input leakage error IIn × RAS mV IIn = leakage

current

(refer to the

MCU's voltage

and current

operating

ratings)

Temp sensor slope Across the full temperature

range of the device

1.55 1.62 1.69 mV/°C 8

VTEMP25 Temp sensor voltage 25 °C 706 716 726 mV 8

1. All accuracy numbers assume the ADC is calibrated with VREFH = VDDA

2. Typical values assume VDDA = 3.0 V, Temp = 25 °C, fADCK = 2.0 MHz unless otherwise stated. Typical values are for

reference only and are not tested in production.

3. The ADC supply current depends on the ADC conversion clock speed, conversion rate and ADC_CFG1[ADLPC] (low

power). For lowest power operation, ADC_CFG1[ADLPC] must be set, the ADC_CFG2[ADHSC] bit must be clear with

1 MHz ADC conversion clock speed.

4. 1 LSB = (VREFH - VREFL)/2N

5. ADC conversion clock < 16 MHz, Max hardware averaging (AVGE = %1, AVGS = %11)

6. Input data is 100 Hz sine wave. ADC conversion clock < 12 MHz.

7. Input data is 1 kHz sine wave. ADC conversion clock < 12 MHz.

8. ADC conversion clock < 3 MHz

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 53

NXP Semiconductors

Typical ADC 16-bit Differential ENOB vs ADC Clock

100Hz, 90% FS Sine Input

ENOB

ADC Clock Frequency (MHz)

15.00

14.70

14.40

14.10

13.80

13.50

13.20

12.90

12.60

12.30

12.00

1 2 3 4 5 6 7 8 9 10 1211

Hardware Averaging Disabled

Averaging of 4 samples

Averaging of 8 samples

Averaging of 32 samples

Figure 13. Typical ENOB vs. ADC_CLK for 16-bit differential mode

Typical ADC 16-bit Single-Ended ENOB vs ADC Clock

100Hz, 90% FS Sine Input

ENOB

ADC Clock Frequency (MHz)

14.00

13.75

13.25

13.00

12.75

12.50

12.00

11.75

11.50

11.25

11.00

1 2 3 4 5 6 7 8 9 10 1211

Averaging of 4 samples

Averaging of 32 samples

13.50

12.25

Figure 14. Typical ENOB vs. ADC_CLK for 16-bit single-ended mode

7.6.6.2 CMP and 6-bit DAC electrical specifications

Table 32. Comparator and 6-bit DAC electrical specifications

Symbol Description Min. Typ. Max. Unit

VDD Supply voltage 1.8 — 3.6 V

IDDHS Supply current, High-speed mode (EN=1, PMODE=1) — — 200 μA

Table continues on the next page...

MCU Electrical characteristics

54 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 32. Comparator and 6-bit DAC electrical specifications (continued)

Symbol Description Min. Typ. Max. Unit

IDDLS Supply current, low-speed mode (EN=1, PMODE=0) — — 20 μA

VAIN Analog input voltage VSS – 0.3 — VDD V

VAIO Analog input offset voltage — — 20 mV

VHAnalog comparator hysteresis1

• CR0[HYSTCTR] = 00

• CR0[HYSTCTR] = 01

• CR0[HYSTCTR] = 10

• CR0[HYSTCTR] = 11

—

VCMPOh Output high VDD – 0.5 — — V

VCMPOl Output low — — 0.5 V

tDHS Propagation delay, high-speed mode (EN=1,

PMODE=1)

20 50 200 ns

tDLS Propagation delay, low-speed mode (EN=1,

PMODE=0)

80 250 600 ns

Analog comparator initialization delay2— — 40 μs

IDAC6b 6-bit DAC current adder (enabled) — 7 — μA

INL 6-bit DAC integral non-linearity –0.5 — 0.5 LSB3

DNL 6-bit DAC differential non-linearity –0.3 — 0.3 LSB

1. Typical hysteresis is measured with input voltage range limited to 0.6 to VDD–0.6 V.

2. Comparator initialization delay is defined as the time between software writes to change control inputs (Writes to

CMP_DACCR[DACEN], CMP_DACCR[VRSEL], CMP_DACCR[VOSEL], CMP_MUXCR[PSEL], and

CMP_MUXCR[MSEL]) and the comparator output settling to a stable level.

3. 1 LSB = Vreference/64

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 55

NXP Semiconductors

HYSTCTR

Setting

0.1

Vin level (V)

CMP Hystereris (V)

3.12.82.5

2.2

1.91.61.3

0.70.4

0.05

0.01

0.02

0.03

0.08

0.07

0.06

0.04

Figure 15. Typical hysteresis vs. Vin level (VDD = 3.3 V, PMODE = 0)

MCU Electrical characteristics

56 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

HYSTCTR

Setting

0.1 3.12.82.5

2.2

1.91.61.3

0.70.4

0.1

0.02

0.04

0.06

0.18

0.14

0.12

0.08

0.16

Vin level (V)

CMP Hysteresis (V)

Figure 16. Typical hysteresis vs. Vin level (VDD = 3.3 V, PMODE = 1)

7.6.7 Timers

See General switching specifications.

7.6.8 Communication interfaces

7.6.8.1 USB electrical specifications

The USB electricals for the USB On-the-Go module conform to the standards

documented by the Universal Serial Bus Implementers Forum. For the most up-to-

date standards, visit usb.org.

NOTE

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 57

NXP Semiconductors

7.6.8.2 USB DCD electrical specifications

Table 33. USB0 DCD electrical specifications

Symbol Description Min. Typ. Max. Unit

VDP_SRC USB_DP source voltage (up to 250 μA) 0.5 — 0.7 V

VLGC Threshold voltage for logic high 0.8 — 2.0 V

IDP_SRC USB_DP source current 7 10 13 μA

IDM_SINK USB_DM sink current 50 100 150 μA

RDM_DWN D- pulldown resistance for data pin contact detect 14.25 — 24.8 kΩ

VDAT_REF Data detect voltage 0.25 0.33 0.4 V

7.6.8.3 VREG electrical specifications

Table 34. VREG electrical specifications

Symbol Description Min. Typ.1Max. Unit Notes

VREGIN Input supply voltage 2.7 — 5.5 V

IDDon Quiescent current — Run mode, load current

equal zero, input supply (VREGIN) > 3.6 V

— 125 186 μA

IDDstby Quiescent current — Standby mode, load

current equal zero

— 1.27 30 μA

IDDoff Quiescent current — Shutdown mode

• VREGIN = 5.0 V and temperature=25 °C

• Across operating voltage and temperature

—

650

—

μA

ILOADrun Maximum load current — Run mode — — 120 mA

ILOADstby Maximum load current — Standby mode — — 1 mA

VReg33out Regulator output voltage — Input supply

(VREGIN) > 3.6 V

• Run mode

• Standby mode

2.1

3.3

2.8

3.6

VReg33out Regulator output voltage — Input supply

(VREGIN) < 3.6 V, pass-through mode

2.1 — 3.6 V 2

COUT External output capacitor 1.76 2.2 8.16 μF

ESR External output capacitor equivalent series

resistance

1 — 100 mΩ

ILIM Short circuit current — 290 — mA

1. Typical values assume VREGIN = 5.0 V, Temp = 25 °C unless otherwise stated.

2. Operating in pass-through mode: regulator output voltage equal to the input voltage minus a drop proportional to ILoad.

MCU Electrical characteristics

58 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

7.6.8.4 DSPI switching specifications (limited voltage range)

The DMA Serial Peripheral Interface (DSPI) provides a synchronous serial bus with

master and slave operations. Many of the transfer attributes are programmable. The

tables below provide DSPI timing characteristics for classic SPI timing modes. Refer

to the DSPI chapter of the Reference Manual for information on the modified transfer

formats used for communicating with slower peripheral devices.

Table 35. Master mode DSPI timing (limited voltage range)

Num Description Min. Max. Unit Notes

Operating voltage 2.7 3.6 V

Frequency of operation — 25 MHz

DS1 DSPI_SCK output cycle time 2 x tBUS — ns

DS2 DSPI_SCK output high/low time (tSCK/2) − 2 (tSCK/2) + 2 ns

DS3 DSPI_PCSn valid to DSPI_SCK delay (tBUS x 2) −

— ns 1

DS4 DSPI_SCK to DSPI_PCSn invalid delay (tBUS x 2) −

— ns 2

DS5 DSPI_SCK to DSPI_SOUT valid — 8.5 ns

DS6 DSPI_SCK to DSPI_SOUT invalid −2 — ns

DS7 DSPI_SIN to DSPI_SCK input setup 15 — ns

DS8 DSPI_SCK to DSPI_SIN input hold 0 — ns

1. The delay is programmable in SPIx_CTARn[PSSCK] and SPIx_CTARn[CSSCK].

2. The delay is programmable in SPIx_CTARn[PASC] and SPIx_CTARn[ASC].

DS3 DS4

DS1

DS2

DS7 DS8

First data Last data

DS5

First data Data Last data

DS6

Data

DSPI_PCSn

DSPI_SCK

(CPOL=0)

DSPI_SIN

DSPI_SOUT

Figure 17. DSPI classic SPI timing — master mode

Table 36. Slave mode DSPI timing (limited voltage range)

Num Description Min. Max. Unit

Operating voltage 2.7 3.6 V

Frequency of operation 12.5 MHz

Table continues on the next page...

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 59

NXP Semiconductors

Table 36. Slave mode DSPI timing (limited voltage range) (continued)

Num Description Min. Max. Unit

DS9 DSPI_SCK input cycle time 4 x tBUS — ns

DS10 DSPI_SCK input high/low time (tSCK/2) − 2 (tSCK/2) + 2 ns

DS11 DSPI_SCK to DSPI_SOUT valid — 10 ns

DS12 DSPI_SCK to DSPI_SOUT invalid 0 — ns

DS13 DSPI_SIN to DSPI_SCK input setup 2 — ns

DS14 DSPI_SCK to DSPI_SIN input hold 7 — ns

DS15 DSPI_SS active to DSPI_SOUT driven — 14 ns

DS16 DSPI_SS inactive to DSPI_SOUT not driven — 14 ns

First data Last data

First data Data Last data

Data

DS15

DS10 DS9

DS16

DS11

DS12

DS14

DS13

DSPI_SS

DSPI_SCK

(CPOL=0)

DSPI_SOUT

DSPI_SIN

Figure 18. DSPI classic SPI timing — slave mode

7.6.8.5 DSPI switching specifications (full voltage range)

The DMA Serial Peripheral Interface (DSPI) provides a synchronous serial bus with

master and slave operations. Many of the transfer attributes are programmable. The

tables below provides DSPI timing characteristics for classic SPI timing modes. Refer

to the DSPI chapter of the Reference Manual for information on the modified transfer

formats used for communicating with slower peripheral devices.

Table 37. Master mode DSPI timing (full voltage range)

Num Description Min. Max. Unit Notes

Operating voltage 1.8 3.6 V 1

Frequency of operation — 12.5 MHz

DS1 DSPI_SCK output cycle time 4 x tBUS — ns

DS2 DSPI_SCK output high/low time (tSCK/2) - 4 (tSCK/2) + 4 ns

Table continues on the next page...

MCU Electrical characteristics

60 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 37. Master mode DSPI timing (full voltage range) (continued)

Num Description Min. Max. Unit Notes

DS3 DSPI_PCSn valid to DSPI_SCK delay (tBUS x 2) −

— ns 2

DS4 DSPI_SCK to DSPI_PCSn invalid delay (tBUS x 2) −

— ns 3

DS5 DSPI_SCK to DSPI_SOUT valid — 10 ns

DS6 DSPI_SCK to DSPI_SOUT invalid -4.5 — ns

DS7 DSPI_SIN to DSPI_SCK input setup 20.5 — ns

DS8 DSPI_SCK to DSPI_SIN input hold 0 — ns

1. The DSPI module can operate across the entire operating voltage for the processor, but to run across the full voltage

range the maximum frequency of operation is reduced.

2. The delay is programmable in SPIx_CTARn[PSSCK] and SPIx_CTARn[CSSCK].

3. The delay is programmable in SPIx_CTARn[PASC] and SPIx_CTARn[ASC].

DS3 DS4

DS1

DS2

DS7 DS8

First data Last data

DS5

First data Data Last data

DS6

Data

DSPI_PCSn

DSPI_SCK

(CPOL=0)

DSPI_SIN

DSPI_SOUT

Figure 19. DSPI classic SPI timing — master mode

Table 38. Slave mode DSPI timing (full voltage range)

Num Description Min. Max. Unit

Operating voltage 1.8 3.6 V

Frequency of operation — 6.25 MHz

DS9 DSPI_SCK input cycle time 8 x tBUS — ns

DS10 DSPI_SCK input high/low time (tSCK/2) - 4 (tSCK/2) + 4 ns

DS11 DSPI_SCK to DSPI_SOUT valid — 20 ns

DS12 DSPI_SCK to DSPI_SOUT invalid 0 — ns

DS13 DSPI_SIN to DSPI_SCK input setup 2 — ns

DS14 DSPI_SCK to DSPI_SIN input hold 7 — ns

DS15 DSPI_SS active to DSPI_SOUT driven — 19 ns

DS16 DSPI_SS inactive to DSPI_SOUT not driven — 19 ns

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 61

NXP Semiconductors

First data Last data

First data Data Last data

Data

DS15

DS10 DS9

DS16

DS11

DS12

DS14

DS13

DSPI_SS

DSPI_SCK

(CPOL=0)

DSPI_SOUT

DSPI_SIN

Figure 20. DSPI classic SPI timing — slave mode

7.6.8.6 I2C

See General switching specifications.

7.6.8.7 UART

See General switching specifications.

7.6.8.8 Normal Run, Wait and Stop mode performance over the full

operating voltage range

This section provides the operating performance over the full operating voltage for the

device in Normal Run, Wait and Stop modes.

Due to a limited set of pin availability in the SiP, the I2S/SAI block is usable only for

receive mode and must be configured as a slave.

Table 39. I2S/SAI master mode timing

Num. Characteristic Min. Max. Unit

Operating voltage 1.8 3.6 V

S1 I2S_MCLK cycle time 40 — ns

S2 I2S_MCLK (as an input) pulse width high/low 45% 55% MCLK period

S3 I2S_TX_BCLK/I2S_RX_BCLK cycle time (output) 80 — ns

S4 I2S_TX_BCLK/I2S_RX_BCLK pulse width high/low 45% 55% BCLK period

S5 I2S_TX_BCLK/I2S_RX_BCLK to I2S_TX_FS/

I2S_RX_FS output valid

— 15 ns

S6 I2S_TX_BCLK/I2S_RX_BCLK to I2S_TX_FS/

I2S_RX_FS output invalid

0 — ns

Table continues on the next page...

MCU Electrical characteristics

62 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 39. I2S/SAI master mode timing (continued)

Num. Characteristic Min. Max. Unit

S7 I2S_TX_BCLK to I2S_TXD valid — 15 ns

S8 I2S_TX_BCLK to I2S_TXD invalid 0 — ns

S9 I2S_RXD/I2S_RX_FS input setup before

I2S_RX_BCLK

25 — ns

S10 I2S_RXD/I2S_RX_FS input hold after I2S_RX_BCLK 0 — ns

S1 S2 S2

S9 S10

S10

I2S_MCLK (output)

I2S_TX_BCLK/

I2S_RX_BCLK (output)

I2S_TX_FS/

I2S_RX_FS (output)

I2S_TX_FS/

I2S_RX_FS (input)

I2S_TXD

I2S_RXD

Figure 21. I2S/SAI timing — master modes

Table 40. I2S/SAI slave mode timing

Num. Characteristic Min. Max. Unit

Operating voltage 1.8 3.6 V

S11 I2S_TX_BCLK/I2S_RX_BCLK cycle time (input) 80 — ns

S12 I2S_TX_BCLK/I2S_RX_BCLK pulse width high/low

(input)

45% 55% MCLK period

S13 I2S_TX_FS/I2S_RX_FS input setup before

I2S_TX_BCLK/I2S_RX_BCLK

10 — ns

S14 I2S_TX_FS/I2S_RX_FS input hold after

I2S_TX_BCLK/I2S_RX_BCLK

2 — ns

S15 I2S_TX_BCLK to I2S_TXD/I2S_TX_FS output valid — 29 ns

S16 I2S_TX_BCLK to I2S_TXD/I2S_TX_FS output

invalid

0 — ns

S17 I2S_RXD setup before I2S_RX_BCLK 10 — ns

S18 I2S_RXD hold after I2S_RX_BCLK 2 — ns

S19 I2S_TX_FS input assertion to I2S_TXD output valid1— 21 ns

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 63

NXP Semiconductors

1. Applies to first bit in each frame and only if the TCR4[FSE] bit is clear

S15

S13

S15

S17 S18

S15

S16

S14

S16

S11

S12

I2S_TX_BCLK/

I2S_RX_BCLK (input)

I2S_TX_FS/

I2S_RX_FS (output)

I2S_TXD

I2S_RXD

I2S_TX_FS/

I2S_RX_FS (input) S19

Figure 22. I2S/SAI timing — slave modes

7.6.8.9 VLPR, VLPW, and VLPS mode performance over the full

operating voltage range

This section provides the operating performance over the full operating voltage for the

device in VLPR, VLPW, and VLPS modes.

Due to a limited set of pin availability in the SiP, the I2S/SAI block is usable only for

receive mode and must be configured as a slave.

Table 41. I2S/SAI master mode timing in VLPR, VLPW, and VLPS modes (full voltage range)

Num. Characteristic Min. Max. Unit

Operating voltage 1.8 3.6 V

S1 I2S_MCLK cycle time 62.5 — ns

S2 I2S_MCLK pulse width high/low 45% 55% MCLK period

S3 I2S_TX_BCLK/I2S_RX_BCLK cycle time (output) 250 — ns

S4 I2S_TX_BCLK/I2S_RX_BCLK pulse width high/low 45% 55% BCLK period

S5 I2S_TX_BCLK/I2S_RX_BCLK to I2S_TX_FS/

I2S_RX_FS output valid

— 45 ns

S6 I2S_TX_BCLK/I2S_RX_BCLK to I2S_TX_FS/

I2S_RX_FS output invalid

0 — ns

S7 I2S_TX_BCLK to I2S_TXD valid — 45 ns

S8 I2S_TX_BCLK to I2S_TXD invalid 0 — ns

S9 I2S_RXD/I2S_RX_FS input setup before

I2S_RX_BCLK

75 — ns

S10 I2S_RXD/I2S_RX_FS input hold after I2S_RX_BCLK 0 — ns

MCU Electrical characteristics

64 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

S1 S2 S2

S9 S10

S10

I2S_MCLK (output)

I2S_TX_BCLK/

I2S_RX_BCLK (output)

I2S_TX_FS/

I2S_RX_FS (output)

I2S_TX_FS/

I2S_RX_FS (input)

I2S_TXD

I2S_RXD

Figure 23. I2S/SAI timing — master modes

Table 42. I2S/SAI slave mode timing in VLPR, VLPW, and VLPS modes (full voltage range)

Num. Characteristic Min. Max. Unit

Operating voltage 1.8 3.6 V

S11 I2S_TX_BCLK/I2S_RX_BCLK cycle time (input) 250 — ns

S12 I2S_TX_BCLK/I2S_RX_BCLK pulse width high/low

(input)

45% 55% MCLK period

S13 I2S_TX_FS/I2S_RX_FS input setup before

I2S_TX_BCLK/I2S_RX_BCLK

30 — ns

S14 I2S_TX_FS/I2S_RX_FS input hold after

I2S_TX_BCLK/I2S_RX_BCLK

2 — ns

S15 I2S_TX_BCLK to I2S_TXD/I2S_TX_FS output valid — 87 ns

S16 I2S_TX_BCLK to I2S_TXD/I2S_TX_FS output

invalid

0 — ns

S17 I2S_RXD setup before I2S_RX_BCLK 30 — ns

S18 I2S_RXD hold after I2S_RX_BCLK 2 — ns

S19 I2S_TX_FS input assertion to I2S_TXD output valid1— 72 ns

1. Applies to first bit in each frame and only if the TCR4[FSE] bit is clear

MCU Electrical characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 65

NXP Semiconductors

S15

S13

S15

S17 S18

S15

S16

S14

S16

S11

S12

I2S_TX_BCLK/

I2S_RX_BCLK (input)

I2S_TX_FS/

I2S_RX_FS (output)

I2S_TXD

I2S_RXD

I2S_TX_FS/

I2S_RX_FS (input) S19

Figure 24. I2S/SAI timing — slave modes

Transceiver Electrical Characteristics

8.1 DC electrical characteristics

Table 43. DC electrical characteristics (VBAT, VBAT2 = 2.7 V, TA=25 °C, unless otherwise

noted)

Characteristic Symbol Min Typ Max Unit

Power Supply Current (VBAT + VBAT2)

Reset / power down1Ileakage — <60 <100 nA

Hibernate1ICCH — <1 — μA

Doze (No CLK_OUT) ICCD — 500 — μA

Idle (No CLK_OUT) ICCI — 700 — μA

Transmit mode (0 dBm nominal output power) ICCT — 17 18 mA

Receive mode (normal)

Receive mode (power preamble search)

ICCR — 19

15 (LPPS)

19.5 mA

Input current (VIN = 0 V or VDDINT) (All digital inputs) IIN — — ±1 μA

Input low voltage (all digital inputs) VIL 0 — 30%

VDDINT

Input high voltage (all digital inputs) VIH 70%

VDDINT

— VDDINT V

Output high voltage (IOH = -1 mA) (all digital outputs) VOH 80%

VDDINT

— VDDINT V

Output low voltage (IOL = 1 mA) (all digital outputs) VOL 0 — 20%

VDDINT

1. To attain specified low power current, all GPIO and other digital IO must be handled properly.

Transceiver Electrical Characteristics

66 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

8.2 AC electrical characteristics

Table 44. Receiver AC electrical characteristics (VBAT, VDDINT = 2.7 V, TA=25 °C, fref = 32 MHz

unless otherwise noted)

Characteristic Symbol Min Typ Max Unit

Sensitivity for 1% packet error rate (PER) (–40 to +105 °C) SENSper — –99 –97 dBm

Sensitivity for 1% packet error rate (PER) (+25 °C) SENSper — –102 dBm

Saturation (maximum input level) SENSmax –10 — — dBm

Channel rejection for dual port mode (1% PER and desired

signal –82 dBm)

+5 MHz (adjacent channel)

–5 MHz (adjacent channel)

+10 MHz (alternate channel)

–10 MHz (alternate channel)

>= 15 MHz

—

Frequency error tolerance — — 200 kHz

Symbol rate error tolerance 80 — — ppm

Table 45. Transmitter AC electrical characteristics (VBAT, VDDINT = 2.7 V, TA=25 °C, fref = 32

MHz unless otherwise noted)

Characteristic Symbol Min Typ Max Unit

Power spectral density1, absolute limit from –40°C to

+105°C

–30 — — dBm

Power Spectral Density2, Relative limit from –40°C to

+105°C

–20 — — dB

Nominal output power3Pout –2 0 2 dBm

Maximum output power3— 8 — dBm

Error vector magnitude EVM — 8 13 %

Output power control range4— 40 — dB

Over the air data rate — 250 — kbps

2nd harmonic5— <–50 <–40 dBm

3rd harmonic5— <–50 <–40 dBm

1. [f-fc] > 3.5 MHz, average spectral power is measured in 100 kHz resolution BW.

2. For the relative limit, the reference level is the highest reference power measured within ±1 MHz of the carrier

frequency.

3. Measurement is at the package pin.

4. Measurement is at the package pin on the output of the Tx/Rx switch. It does not degrade more than ±2 dB across

temperature and an additional ±1 dB across all processes. Power adjustment will span nominally from –35 dBm to +8

dBm in 21 steps @ 2 dBm / step.

5. Measured with output power set to nominal (0 dBm) and temperature @ 25°C. Trap filter is needed.

Transceiver Electrical Characteristics

MKW2xD Data Sheet, Rev. 2, 05/2016 67

NXP Semiconductors

Table 46. RF port impedance

Characteristic Symbol Typ Unit

RFIN Pins for internal T/R switch configuration, TX mode

2.360 GHz

2.420 GHz

2.480 GHz

Zin 14.7 - j215

13.7 -

j18.7

13 - j16.3

Ohm

RFIN Pins for internal or external T/R switch configuration, RX mode

2.360 GHz

2.420 GHz

2.480 GHz

Zin 14 - j9.5

13 - j7.6

12.3 - j5.6

Ohm

8.3 SPI timing: R_SSEL_B to R_SCLK

The following diagram describes timing constraints that must be guaranteed by the

system designer.

tASC

R_SCLK

R_MOSI

tDT

tCKL

tCKH

tCSC

Figure 25. SPI timing: R_SSEL_B to R_SCLK

tCSC (CS-to-SCK delay): 31.25 ns

tASC (After SCK delay): 31.25 ns

tDT (Minimum CS idle time): 62.5 ns

tCKH (Minimum R_SCLK high time): 31.25 ns (for SPI writes); 55.55 ns (for SPI reads)

tCKL (Minimum R_SCLK low time): 31.25 ns (for SPI writes); 55.55 ns (for SPI reads)

Note

The SPI master device deasserts R_SSEL_B only on byte

boundaries, and only after guaranteeing the tASC constraint

shown above.

Transceiver Electrical Characteristics

68 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

8.4 SPI timing: R_SCLK to R_MOSI and R_MISO

The following diagram describes timing constraints that must be guaranteed by the

system designer. These constraints apply to the Master SPI (R_MOSI), and are

guaranteed by the radio SPI (R_MISO).

tDSU

R_SCLK

R_MOSI

R_MISO

tDH

Figure 26. SPI timing: R_SCLK to R_MOSI and R_MISO

tDSU (data-to-SCK setup): 10 ns

tDH (SCK-to-data hold): 10 ns

9Crystal oscillator reference frequency

This section provides application specific information regarding crystal oscillator

reference design and recommended crystal usage.

9.1 Crystal oscillator design considerations

The IEEE ® 802.15.4 Standard requires that frequency tolerance be kept within ±40

ppm accuracy. This means that a total offset up to 80 ppm between transmitter and

receiver will still result in acceptable performance. The MKW2xD transceiver

provides on board crystal trim capacitors to assist in meeting this performance, while

the bulk of the crystal load capacitance is external.

Crystal oscillator reference frequency

MKW2xD Data Sheet, Rev. 2, 05/2016 69

NXP Semiconductors

9.2 Crystal requirements

The suggested crystal specification for the MKW2xD is shown in Table 47. A number

of the stated parameters are related to desired package, desired temperature range and

use of crystal capacitive load trimming.

Table 47. MKW2xD crystal specifications

Parameter Value Unit Condition

Frequency 32 MHz

Frequency tolerance (cut tolerance) ±10 ppm at 25°C

Frequency stability (temperature) ±25 ppm Over desired temperature range

Aging1±2 ppm max

Equivalent series resistance 60 Ω max

Load capacitance 5–9 pF

Shunt capacitance <2 pF max

Mode of oscillation fundamental

1. A wider aging tolerance may be acceptable if application uses trimming at production final test.

Crystal oscillator reference frequency

70 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Pin diagrams and pin assignments

10.1 MKW21D256/MKW21D512 Pin Assignment

56 55 54 53 52 51 50 49 48 47 46 45 44 43

15 16 17 18 19 20 21 22 23 24 25 26 27 28

MKW21D256/512

EXTAL_32M

GPIO1

GPIO2

PTC4/LLWU_P8

PTC5/LLWU_P9

PTC6/LLWU_P10

PTC7

PTD1

PTD2/LLWU_P13

PTD3

PTD4/LLWU_P14

PTD5

PTD6/LLWU_P15

PTD7

63 57 58

6059

61 62

GND flag

VBAT2_RF

RESET_B

PTA19/XTAL

PTA18/EXTAL/CLK_OUT

VDD_MCU

PTA4/LLWU_P3

PTA3

PTA2

PTA1

PTA0

VBAT_MCU

EXTAL_32

XTAL_32

TAMPER0/RTC_WAKEUP_B

PTE0

PTE1/LLWU_P0

PTE2/LLWU_P1

PTE3

PTE4/LLWU_P2

VDD_MCU

PTE16

PTE17

PTE18

PTE19

VDDA

VREFH

VREFL

VSSA

XTAL_32M

VBAT_RF

VDD_RF

VDD_IF

VDD_PA

GND_PA

RF_OUTN

RF_OUTP

GND_PA

TX_SWITCH

RX_SWITCH

ANT_B

ANT_A

VDD_REGD

Pin diagrams and pin assignments

MKW2xD Data Sheet, Rev. 2, 05/2016 71

NXP Semiconductors

10.2 MKW22/24D512V Pin Assignment

56 55 54 53 52 51 50 49 48 47 46 45 44 43

15 16 17 18 19 20 21 22 23 24 25 26 27 28

MKW22/24D512 (USB)

EXTAL_32M

GPIO1

GPIO2

PTC4/LLWU_P8

PTC5/LLWU_P9

PTC6/LLWU_P10

PTC7

PTD1

PTD2/LLWU_P13

PTD3

PTD4/LLWU_P14

PTD5

PTD6/LLWU_P15

PTD7

63 57 58

6059

61 62

GND flag

VBAT2_RF

RESET_B

PTA19/XTAL

PTA18/EXTAL/CLK_OUT

VDD_MCU

PTA4/LLWU_P3

PTA3

PTA2

PTA1

PTA0

VBAT_MCU

EXTAL_32

XTAL_32

TAMPER0/RTC_WAKEUP_B

PTE0

PTE1/LLWU_P0

PTE2/LLWU_P1

PTE3

PTE4/LLWU_P2

VDD_MCU

USB0_DP

USB0_DM

VOUT33

VREGIN

VDDA

VREFH

VREFL

VSSA

XTAL_32M

VBAT_RF

VDD_RF

VDD_IF

VDD_PA

GND_PA

RF_OUTN

RF_OUTP

GND_PA

TX_SWITCH

RX_SWITCH

ANT_B

ANT_A

VDD_REGD

10.3 Pin assignments

Note

SPI1 (ALT2): SPI1 is dedicated to the radio and is not an

alternate MCU peripheral.

Table 48. Pin Assignments

MKW

22/24

D512

(USB)

MKW

21D25

6/512

Name Default ALT0 ALT1 ALT2 ALT3 ALT4 ALT5 ALT6 ALT7 EZPO

1 1 EXTAL

_32M

EXTAL_32M

2 2 GPIO1 GPIO1

3 3 GPIO2 GPIO2

Table continues on the next page...

Pin diagrams and pin assignments

72 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 48. Pin Assignments (continued)

MKW

22/24

D512

(USB)

MKW

21D25

6/512

Name Default ALT0 ALT1 ALT2 ALT3 ALT4 ALT5 ALT6 ALT7 EZPO

4 4 PTC4/

LLWU_

Disabled PTC4/

LLWU_

SPI0_

PCS0

UART1

_TX

FTM0_

CH3

CMP1_

OUT

5 5 PTC5/

LLWU_

Disabled PTC5/

LLWU_

SPI0_

SCK

LPTM

R0_AL

I2S0_R

XD0

CMP0_

OUT

6 6 PTC6/

LLWU_

P10

CMP0_IN0 CMP0_

IN0

PTC6/

LLWU_

P10

SPI0_

SOUT

PDB0_

EXTR

I2S0_R

X_BCL

I2S0_

MCLK

7 7 PTC7 CMP0_IN1 CMP0_

IN1

PTC7 SPI0_

SIN

USB_S

OF_O

I2S0_R

X_FS

8 8 PTD1 ADC0_SE5b ADC0_

SE5b

PTD1 SPI0_

SCK

UART2

_CTS_

9 9 PTD2/

LLWU_

P13

Disabled PTD2/

LLWU_

P13

SPI0_

SOUT

UART2

_RX

I2C0_S

10 10 PTD3 Disabled PTD3 SPI0_

SIN

UART2

_TX

I2C0_S

11 11 PTD4/

LLWU_

P14

ADC0_SE21 ADC0_

SE21

PTD4/

LLWU_

P14

SPI0_

PCS1

UART0

_RTS_

FTM0_

CH4

EWM_I

12 12 PTD5 ADC0_SE6b ADC0_

SE6b

PTD5 SPI0_

PCS2

UART0

_CTS_

UART0

_COL_

FTM0_

CH5

EWM_

OUT_b

13 13 PTD6/

LLWU_

P15

ADC0_SE7b ADC0_

SE7b

PTD6/

LLWU_

P15

SPI0_

PCS3

UART0

_RX

FTM0_

CH6

FTM0_

FLT0

14 14 PTD7 ADC0_SE22 ADC0_

SE22

PTD7 CMT_I

UART0

_TX

FTM0_

CH7

FTM0_

FLT1

15 15 PTE0 ADC0_SE10 ADC0_

SE10

PTE0 SPI1_

PCS1

UART1

_TX

TRAC

E_CLK

OUT

I2C1_S

RTC_C

LKOUT

16 16 PTE1/

LLWU_

DC0_SE11 ADC0_

SE11

PTE1/

LLWU_

SPI1_

SOUT

UART1

_RX

TRAC

E_D3

I2C1_S

SPI1_

SIN

17 17 PTE2/

LLWU_

ADC0_DP1 ADC0_

DP1

PTE2/

LLWU_

SPI1_

SCK

UART1

_CTS_

TRAC

E_D2

Table continues on the next page...

Pin diagrams and pin assignments

MKW2xD Data Sheet, Rev. 2, 05/2016 73

NXP Semiconductors

Table 48. Pin Assignments (continued)

MKW

22/24

D512

(USB)

MKW

21D25

6/512

Name Default ALT0 ALT1 ALT2 ALT3 ALT4 ALT5 ALT6 ALT7 EZPO

18 18 PTE3 ADC0_DM1 ADC0_

DM1

PTE3 SPI1_

SIN

UART1

_RTS_

TRAC

E_D1

SPI1_

SOUT

19 19 PTE4/

LLWU_

Disabled PTE4/

LLWU_

SPI1_

PCS0

TRAC

E_D0

20 20 VDD_M

VDD

21 PTE16 ADC0_SE4a ADC0_

SE4a

PTE16 SPI0_

PCS0

UART2

_TX

FTM_C

LKIN0

FTM0_

FLT3

22 PTE17 ADC0_SE5a ADC0_

SE5a

PTE17 SPI0_

SCK

UART2

_RX

FTM_C

LKIN1

LPTM

R0_AL

23 PTE18 ADC0_SE6a ADC0_

SE6a

PTE18 SPI0_

SOUT

UART2

_CTS_

I2C0_S

24 PTE19 ADC0_SE7a ADC0_

SE7a

PTE19 SPI0_

SIN

UART2

_RTS_

I2C0_S

21 USB0_

USB0_DP USB0_

22 USB0_

USB0_DM USB0_

23 VOUT3

VOUT33 VOUT3

24 VREGI

VREGIN VREGI

25 25 VDDA VDDA VDDA

26 26 VREFH VREFH VREF

27 27 VREFL VREFL VREFL

28 28 VSSA VSSA VSSA

29 29 TAMPE

R0/

RTC_

WAKE

UP_B

TAMPER0/

RTC_WAKEUP_B

TAMP

ER0/

RTC_

WAKE

UP_B

30 30 XTAL3

XTAL32 XTAL3

31 31 EXTAL

EXTAL32 EXTAL

32 32 VBAT_

MCU

VBAT_MCU VBAT_

MCU

Table continues on the next page...

Pin diagrams and pin assignments

74 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

Table 48. Pin Assignments (continued)

MKW

22/24

D512

(USB)

MKW

21D25

6/512

Name Default ALT0 ALT1 ALT2 ALT3 ALT4 ALT5 ALT6 ALT7 EZPO

33 33 PTA0 JTAG_TCLK/

SWD_CLK/

EZP_CLK

PTA0 UART0

_CTS_

UART0

_COL_

FTM0_

CH5

JTAG_

TCLK/

SWD_

CLK

EZP_C

34 34 PTA1 JTAG_TDI/

EZP_DI

PTA1 UART0

_RX

FTM0_

CH6

JTAG_

TDI

EZP_D

35 35 PTA2 JTAG_TDO/

TRACE_SWO/

EZP_DO

PTA2 UART0

_TX

FTM0_

CH7

JTAG_

TDO/

TRAC

E_SW

EZP_D

36 36 PTA3 JTAG_TMS/

SWD_DIO

PTA3 UART0

_RTS_

FTM0_

CH0

JTAG_

TMS/

SWD_

DIO

37 37 PTA4/

LLWU_

NMI_b/EZP_CS_b PTA4/

LLWU_

FTM0_

CH1

NMI_b EZP_C

S_b

38 38 VDD2_

MCU

VDD VDD

39 39 PTA18 EXTAL0 EXTAL

PTA18 FTM0_

FLT2

FTM_C

LKIN0

40 40 PTA19 XTAL0 XTAL0 PTA19 FTM1_

FLT0

FTM_C

LKIN1

LPTM

R0_AL

41 41 RESET

RESET_b RESET

42 42 VBAT2

_RF

VBAT2_RF

431431VDD_R

EGD

VDD_REGD

44 44 ANT_A ANT_A

45 45 ANT_B ANT_B

46 46 RX_S

WITCH

RX_SWITCH

47 47 TX_SW

ITCH

TX_SWITCH

48 48 GND_P

VSSA_PA

49 49 RF_OU

RF_OUTP

Table continues on the next page...

Pin diagrams and pin assignments

MKW2xD Data Sheet, Rev. 2, 05/2016 75

NXP Semiconductors

Table 48. Pin Assignments (continued)

MKW

22/24

D512

(USB)

MKW

21D25

6/512

Name Default ALT0 ALT1 ALT2 ALT3 ALT4 ALT5 ALT6 ALT7 EZPO

50 50 RF_OU

RF_OUTN

51 51 GND_P

VSSA_PA

521521VDD_P

VDD_PA

531531VDD_I

VDD_IF

541541VDD_R

VDD_RF

55 55 VBAT_

VBAT

56 56 XTAL_

32M

XTAL_32M

57 57 Factory

test

Do not connect

58 58 Factory

test

Do not connect

59 59 Factory

test

Do not connect

60 60 Factory

test

Do not connect

61 61 Factory

test

Do not connect

62 62 Factory

test

Do not connect

63 63 GND_P

Connect to ground

1. This pin is used for external bypassing of an internal regulator. DO NOT connect to power.

11 Dimensions

11.1 Obtaining package dimensions

Package dimensions are provided in package drawings.

To find a package drawing, go to nxp.com and perform a keyword search for the

drawing’s document number:

Dimensions

76 MKW2xD Data Sheet, Rev. 2, 05/2016

NXP Semiconductors

If you want the drawing for this package Then use this document number

63 MAPLGA 98ASA00393D

12 Revision History

The following table provides a revision history for this document.

Table 49. Revision History

Rev. No. Date Substantial Changes

2 05/2016 • Updated features list and added pin package diagram on front

page.

• Added Related Resources table.

• Updated structure of section 4 and added section 4.5 "RF Output

Power Distribution".

• Added section 5.1 "Transceiver Transmit Current Distribution".

• Updated pin diagrams with correct pin assignments.

• Replaced MKW2x with MKW2xD through out.

Revision History

MKW2xD Data Sheet, Rev. 2, 05/2016 77

NXP Semiconductors

How to Reach Us:

Home Page:

nxp.com

Web Support:

nxp.com/support

Information in this document is provided solely to enable system and software

implementers to use NXP products. There are no express or implied copyright

licenses granted hereunder to design or fabricate any integrated circuits based

on the information in this document. NXP reserves the right to make changes

without further notice to any products herein.

NXP makes no warranty, representation, or guarantee regarding the suitability of

its products for any particular purpose, nor does NXP assume any liability arising

out of the application or use of any product or circuit, and specifically disclaims

any and all liability, including without limitation consequential or incidental

damages. “Typical” parameters that may be provided in NXP data sheets and/or

specifications can and do vary in different applications, and actual performance

may vary over time. All operating parameters, including “typicals,” must be

validated for each customer application by customerʼs technical experts. NXP

does not convey any license under its patent rights nor the rights of others. NXP

sells products pursuant to standard terms and conditions of sale, which can be

found at the following address: nxp.com/SalesTermsandConditions.

NXP, the NXP logo, NXP SECURE CONNECTIONS FOR A SMARTER

WORLD, Freescale, the Freescale logo, and Kinetis are trademarks of NXP B.V.

All other product or service names are the property of their respective owners.

ARM, the ARM powered logo, and Cortex are registered trademarks of ARM

Document Number MKW2xDxxx

Revision 2, 05/2016