Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability Sizes: 3 - 10 positions Compact size is ideal for distributed DC power applications Two Levels of contact sequencing One contact for either solder or press-fit termination Hardware -- Less or traditional shoulder bolt mounting Minimum of 3mm contact wipe on shortest power contact All MPD connectors in this section are RoHS compliant Cable Mounted Products Specifications Up to 15 amps per contact 250 mating cycle durability +/- 1.25mm radial mis-alignment capability. (Total float is 2.5mm!) 1.6mm sequencing distance -- ideal for modular sheet metal construction applications Minimum of 3mm contact wipe on shortest power contact Maximum continuous operating temperature -- 105C UL 94 V-0 High-temperature thermoplastic housings The new Miniature Power Drawer connector combines a high density power interface in a blind-mateable wire-to-board connector. The MPD contact interface has been previously qualified to requirements similar to BellCore GR-1217 in board-to-board applications. Now available in a crimp-to-wire version, the contacts are rated for up to 15 Amps on 14 AWG wire. In addition, the MPD contacts are designed to meet UL 1977 Hot-Plug requirements for up to 7.8 Amps at 48VDC. The connection consists of a vertical pcb mountable receptacle and a panel mounted floating plug. The vertical receptacle pcb tails are designed for use in either through-hole solder or press-fit applications. The float-mount plug is easily installed from the inside of the chassis without any additional hardware, lending itself to easy assembly of pre-made cable assemblies. Additionally, the staggered wire exit pattern permits the maximum number of contact interfaces in the least amount of connector volume. The compact design is ideal for bringing power to small rack-mounted devices such as 1U Computer Servers and Telecommunications Switches. The 3mm centerline satisfies UL 1977 safety requirements for 48 VDC distributed power applications. For higher voltage applications such as AC input, the contacts can be selectively loaded to handle up to 300 V AC or DC. Technical Documents Product Specification 108-1998 Application Specification 114-13067 82 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Miniature Power Drawer (MPD) Connectors (Continued) Crimp Contacts Current Ratings Standard Power -- 10 Amps High Power -- 16 Amps Material and Finish Cable Mounted Products Standard Power: Crimp Blade Contacts -- Brass Receptacle Contacts -- Phos. Bronze. Finish -- 0.38m Gold over 1.27m Nickel High Power: Blades -- High Conductivity Cu Alloy Receptacle -- High Conductivity Cu Alloy Finish -- 1.27m Gold over 1.27m Nickel Contact Mating Length (Min.) -- Type A -- 4.6mm Type B -- 3.0mm Hot-Pluggability (With High Current Contacts only) -- 250 Cycles -- 7.8 Amps @ 48VDC Note: All contacts are Sn plated in the crimp barrel or Sn in pcb interface Crimp Blade Contacts Wire Size 18-20 AWG 14-16 AWG Type Cycles Standard Power 100 High Power 250 Standard Power 100 High Power 250 Mating Length A B A B A B A B Part Number Strip / Loose Piece 1489128-8 / 1-1489128-4 1489128-7 / 1-1489128-3 1-1489128-0 / 1-1489128-6 1489128-9 / 1-1489128-5 1489757-2 / 1-1489757-0 1489757-1 / 1489757-9 1489757-6 / 1-1489757-2 1489757-5 / 1-1489757-1 Heavy Duty Miniature (HDM) Applicator for AMP-O-LECTRIC Model G Machine - #1385248-3. PRO-CRIMPER Hand Tool #354940-1, Die set # 91363-2 Plugs and Receptacles Materials UL 94V-0 Thermoplastic 105C Max. Operating temperature Note: Vertical PCB Mt. Receptacles supplied with press-fit ACTION PIN contacts. Number of Positions 3 4 5 6 7 8 9 10 Part Number Panel Mt. Plug PCB Mt. Receptacles Snap-In Shoulder Bolt Standard Power High Current 1489127-1 -- 1489715-1 1-1489715-1 1489127-2 1489701-1 1489715-2 1-1489715-2 1489127-3 -- 1489715-3 1-1489715-3 1489127-4 -- 1489715-4 1-1489715-4 1489127-5 -- 1489715-5 1-1489715-5 1489127-6 -- 1489715-6 1-1489715-6 1489127-7 -- 1489715-7 1-1489715-7 1489127-8 -- 1489715-8 1-1489715-8 Note: All part numbers are RoHS compliant. 83 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Blindmate Drawer Connectors Cable Mounted Products Product Facts High current circuits and signal circuits can be mixed in the same connector High current circuits use MIC connector contacts located at four corners of the housing Signal circuits use Standard Drawer Connector contacts 24 positions Hermaphroditic housing can be mated with top and bottom turned while maintaining polarity AMP Hybrid Drawer Connectors offer high current and signal circuits mixed in the same connector system. Signal circuits use the same hermaphroditic crimp snapin contacts that are used in the Standard Drawer Connector. High current circuits use MIC connector contacts which are located at the four corners of the housing. The hermaphroditic housings are available in a popular 24-position size. These housings can be mated with top and bottom turned while maintaining polarity. Performance Specifications Voltage Rating -- 250 VAC Current Rating (Max.) -- Signal Circuit (Drawer); 4 amperes -- 24 AWG [0.2mm2] Wire 5 amperes -- 22 AWG [0.3-0.4mm2] Wire 7 amperes -- 20 AWG [0.5-0.6mm2] Wire Power Circuit (MIC); 10 amperes Low Level Resistance -- Signal Circuit (Drawer); 10 milliohms max. (Initial) 20 milliohms max. (Final) Power Circuit (MIC); 3 milliohms (Initial) 6 milliohms (Final) Dielectric Withstanding Voltage -- 5000 milliohms (Initial) 2000 milliohms (Final) Operating Temperature -- -20C to +120C 84 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Blindmate Drawer Connectors (Continued) Housings (Hermaphroditic), 24 Positions Signal Circuits Power Circuits (4 corners) Housing -- Glass-filled polybutylene terephthalate (PBT), blue Bushing -- Brass, zinc-plated B13 Material A2 A1 A11 B14 .441 [11.22] B23 2.756 [70.00] 1.181 [30.00] Cable Mounted Products Related Product Data .197 Pitch [5.00] 1.771 [45.00] A13 A14 B1 2.394 [60.80] A23 B2 .440 [11.80] B11 Performance Specifications -- page 84 MIC Contacts -- page 86 Crimp Snap-In Contacts -- page 86 Note: Reverse figures show circuit numbers. Technical Documents A1 (Example = The hole used for No. 1 circuit is B13 used for No. 13 on the reverse side.) AMP Product Specification 108-5371 0.24 [6.10] 0.70 [17.9] 1.15 [29.1] Panel Mounting Position (Front Mounting) Housing Part Numbers Floating of Bushing Up- and downward = 0.05 [.002] Circumferential = 0.14 [.006] Up- and downward = 0.30 [.012] Circumferential = 0.80 [.031] 176916-1 176916-2 Upward and downward = Axial clearance Circumferential = Floating Recommended Panel Cutout 2.835 [72.00] 2.394 [60.80] 2.157 [54.80] .481 [12.22] .130 Dia. [3.300] .378 [9.60] 1.953 [49.60] 1.260 [32.00] .480 [12.18] .197* [5.00] .197* [5.00] .098 R* [2.50] R1 All Corners *Dimensions applicable for rear mounting. Note: All part numbers are RoHS compliant. 85 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Blindmate Drawer Connectors (Continued) MIC Contacts (Used for Power Circuits) Material and Finish .827 [21.00] Cable Mounted Products Phosphor bronze, plated .000030 [0.00076] gold in contact area, remainder of contact gold flash, with entire contact underplated nickel Related Product Data Performance Specifications-- page 84 Housings--page 85 Technical Documents Wire Size Range AWG mm2 Insulation Diameter 20-14 .087-.134 2.20-3.40 0.5-2.0 Part Numbers Receptacle Contact Loose Piece Strip Form 170286-4 170289-3 Hand Tool 755338-1* 755339-1 *Part Number 755338-1 is used on wire for automotive application; Part Number 755339-1 is used on other types of wire. Extraction Tool Part Number 723735-1 AMP Instruction Sheets 408-089J, 408-369J, 408-370J .126 [3.20] Crimp Snap-In Contacts (Hermaphroditic, Used for Signal Circuits) .791 [20.10] Material and Finish Phosphor bronze, plated gold in contact area (for length of .236 [6.0] from tip), with entire contact underplated nickel .146 [3.700] Wire Size Range Related Product Data Performance Specifications-- page 84 Housings--page 85 Technical Documents AWG mm2 24-20 0.2-0.6 20-16 0.5-1.4 Insulation Dia. Range Strip Form .060-.077 1.50-1.95 .071-.130 1.80-3.30 Part Numbers Applicator for AMP-O-LECTRIC Loose Piece Machine* Contact Hand Tool 170311-1 170313-1 567324-2 724632-1 170484-1 170485-1 567241-2 724787-1 *Applicators are for Model "K" machines. Consult AMP for applicators for other bench machines and lead-making machines. Notes: For applicable wire, use wire specified in UL 1015 or 1007. Extraction Tool Part Number 723986-1 AMP Instruction Sheets 408-097J, 408-151J Tab Contacts Material and Finish .118 [3.00] Brass, plated .000030 [0.00076] gold in contact area, with entire contact underplated nickel .984 [25.00] Related Product Data Performance Specifications-- page 84 Housings--page 85 Wire Size Range AWG mm2 Insulation Diameter 20-14 .087-.134 2.20-3.40 Technical Documents AMP Instruction Sheets 408-144J, 408-369J, 408-370J 0.5-2.0 Part Numbers Tab Contact Strip Form Loose Piece 170221-4 170222-3 Hand Tool 755338-1* 755339-1 *Part Number 755338-1 is used on wire for automotive application; Part Number 755339-1 is used on other types of wire. Extraction Tool Part Number 724763-1 Note: All part numbers are RoHS compliant. 86 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Special Blindmate Drawer Connectors (uses AMP-LEAF Contacts) Product Facts Blindmate connectors accept AMP-LEAF crimp snap-in and solder dip contacts Contacts are phosphor bronze, gold-over-nickel plated 6 and 10 positions Housings made of polybutylene terephthalate (PBT) Special Blindmate Drawer Connectors are available in 6- and 10-position configurations and provide wire-to-board and wire-towire connection capabilities. These connectors offer the integrity of AMP-LEAF contacts with maximum travel wiping action. Housings feature molded-in guide pins and diagonally aligned sockets for correct polarization and to facilitate blindmating. The PC header guide pins extend through the PC board to secure the header to the board prior to soldering. Cable Mounted Products 6-Position Socket Housing (Accepts AMP-LEAF Crimp Snap-In Contacts) 6-Position PC Board Header Housing (Fully loaded with AMP-LEAF Solder Dip Contacts) Performance Specifications Current Rating -- 4 amperes (max.) -- 26-22 AWG [0.12-0.4mm2] wire 10-Position Header Housing (Accepts AMP-LEAF Crimp Snap-In and Solder Dip Contacts) 10-Position Socket Housing (Accepts AMP-LEAF Crimp Snap-In Contacts) Voltage Rating -- 50 VDC Temperature Rating -- -10C to +80C Mounting Screw (2 Required per Socket Housing) 2.17 [5.50] .102 [2.60] .220 [5.60] Part Number 343404-1 .354 [9.00] Material and Finish Steel, plated bright zinc chromate M 3 x 0.5 Thread .197 [5.00] 87 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Special Blindmate Drawer Connectors (Continued) Socket Housing, 6 Positions .354 [9.00] Part Number 343886-1 .670 [17.00] Accepts the following AMP-LEAF Crimp Snap-In Contacts: Part Number 583990-3 (loose piece) Part Number 583204-2 (strip form) Cable Mounted Products .177 [4.50] 1.009 [25.62] .630 [16.00] Contacts must be ordered separately. .187 [4.75] Recommended Panel Cutout .413 [10.50] Material Glass-filled polybutylene terephthalate (PBT), black 1.441 [36.60] .965 [24.50] .187 [4.75] .693 [17.60] .728 [18.50] .594 [15.10] .354 [9.00] .496 [12.60] 1.009 [25.62] PC Board Header Housing, 6 Positions with Board Retention .482 [12.25] .632 [16.06] .322 [8.44] .052 Dia. [1.32] .300 [7.62] .450 [11.43] Part Number 343887-1 .160 [4.06] Accepts AMP-LEAF Crimp Snap-In Contact Part Number 343371-1 and Solder Dip Contact Part Number 583294-2 Contacts must be ordered separately; refer to contact specification pages for details. .965 [24.50] .157 Dia. [4.00] Recommended PC Board Layout .150 [3.80] .343 [8.70] .965 [24.50] .850 [21.60] Material Glass-filled polybutylene terephthalate (PBT), black .450 [11.43] .150 [3.80] Position No. 1 .039 [1.00] .965 [24.50] .559 [14.20] .701 [17.80] .150 [3.80] Note: All part numbers are RoHS compliant. 88 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Special Blindmate Drawer Connectors (Continued) Socket Housing, 10 Positions .156 [3.96] .929 [23.60] .413 [10.50] .130 Dia. [3.30] Part Number 343348-1 R3 Accepts the following AMP-LEAF Crimp Snap-In Contacts: 1.240 [31.50] Contacts must be ordered separately. R5 Cable Mounted Products .354 .807 [9.00] [20.50] Part Number 343371-1 (strip form) Part Number 583204-2 (strip form) 1.299 [33.00] Recommended Panel Cutout .748 [19.00] Material Glass-filled polybutylene terephthalate (PBT), black 1.240 [31.50] .874 [22.20] .217 [5.50] .413 .591 [15.00] [10.50] .315 [8.00] .850 [21.60] .313 [7.95] .205 [5.20] .728 [18.50] .374 [9.50] .276 [7.00] .772 [19.60] 1.299 [33.00] 1.732 [44.00] R4 .354 [9.00] .787 [20.00] Header Housing, 10 Positions .187 [4.75] .965 [24.50] .412 [10.47] Part Number 343347-1 .433 [11.00] Accepts AMP-LEAF Crimp Snap-In Contact Part Number 343371-1 and Solder Dip Contact Part Number 583294-2 .272 [6.92] .290 [7.37] Contacts must be ordered separately: refer to contact specification pages for details. Material Glass-filled polybutylene terephthalate (PBT), black .619 [15.71] .419 [10.63] .126 [3.20] Recommended Panel Cutout 1.240 [31.50] 1.008 [25.60] .590 [15.00] .211 [5.35] .720 [18.30] .160 [4.00] .850 [21.60] .984 .413 [10.50] [25.00] 1.181 [30.00] .126 x .433 [3.20 x 11.00] 1.535 [39.00] .709 [18.00] .118 [3.00] .354 [9.00] Note: All part numbers are RoHS compliant. 89 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Special Blindmate Drawer Connectors (Continued) Crimp, Snap-In Contacts Material and Finish Cable Mounted Products Phosphor bronze, plated as follows: Plating A -- .000100-.000200 [0.00254-0.00508] tin (lubricant must be used) Plating B -- .000030 [0.00076] min. gold in mating area, gold flash on remainder of contact, with entire contact underplated .000050 [0.00127] min. nickel Plating C -- .000015 [0.00038] min. gold in mating area, gold flash on remainder of contact, with entire contact underplated .000050 [0.00127] min. nickel Plating D -- .000030 [0.00076] min. gold over .000050 [0.00127] min. nickel in mating area, remainder of contact gold flash over .000015 [0.00038] min. nickel Plating E -- .000030 [0.00076] min. gold in mating area, with entire contact underplated .000050 [0.00127] min. nickel Plating F -- .000015 [0.00038] min. gold in mating area, with entire contact underplated .000050 [0.00127] min. nickel Wire Barrel Crimp Insulation Support Terminal Stop Locking Lance Part Numbers Wire Range AWG/mm2 Insulation Range Double Single Wire Wire 26-22 0.12-0.4 .050-.064 1.27-1.63 -- 22-18 0.3-0.9 .055-.080 1.40-2.03 .120 3.05 Max. 16 1.25-1.40 .108 2.74 Max. .080-.160 2.03-4.06 Contact Strip Loose Form Piece 583204-2 583990-3 -- 343371-1 -- 583361-2 583361-3 583989-3 583989-4 583361-4 -- 583555-4 -- 583555-6 583991-3 60151-6 Applicator for Contact AMP-O-LECTRIC Finish Machine* B D A B C E F B Hand Tool 466366-2 90028-3 466367-2 90017-3 (1 #22-20) 90028-3 (2 #22) 90101-3 (1 #20) 466368-2 90031-8 (2 #18) 90101-3 (2 #20) 90101-3 (1 #16) *Applicators are for AMP-O-LECTRIC Model "K" machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. Notes: 1. Shorting contacts are available, consult Tyco Electronics. Notes: 2. Contacts and housings to accommodate .093 [2.36] thick PC boards can be made available, consult Tyco Electronics. Hand Crimping Tool Contact Extraction Tool Technical Documents Product Specifications 108-9013, 108-9043 Application Specification 114-9003 Instruction Sheets 408-6591, 408-7045, 408-7622, 408-7623, 408-7624, 408-7625, 408-7626 Crimp Inspection Sheet CI 8050-33 Dummy Contact Plain Finish-- Part Number 66084-1 Tin Finish-- Part Number 66084-2 Gold Finish-- Part Number 66084-3 Material Phosphor bronze Part Number Extraction Used with Tool Housings 480110-2, -5 480142-2, -3 582140-5 582147-5 582264-2 582500-2 582963-2 583167-3 465195-1 583280-1 583617-1 583680-1 583685-1 583722-1 583723-1 583724-1 583725-1 583726-1 465195-2 480133-2 Technical Documents Instruction Sheet 408-7037 Note: All part numbers are RoHS compliant. 90 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Standard Blindmate Drawer Connectors Product Facts Designed for rack and panel applications Durable--withstands multiple mating/unmating Low insertion and withdrawal force Hermaphroditic contacts Accepts signal and power contacts Provides excellent creep distance Mated connectors dust-proof Configurations available in 8, 12, 16, 20 and 24 positions Contacts accept wire sizes 24-14 AWG [0.2-2.0mm2] Accept wire insulation diameter -- .059-.154 [1.5-3.9] Recognized under the Component Program of the Underwriters Laboratories Inc. Cable Mounted Products R AMP Drawer Connectors are designed as an economical rack and panel connector. They are used in copying machines, control panels, power distribution boards, industrial equipment, power supplies and other electronic equipment. Blindmate drawer connectors feature excellent durability and feature low insertion and withdrawal force. Leaf-type hermaphroditic contacts ensure reliable, positive contact. Contacts are on .197 [5.00] centerlines for signal circuits, and .260 [6.60] centerlines for power circuits (2-circuits at each end of the double row of contacts) for a total of 4. Row-to-row spacing is .390 [9.90]. Housings are made of UL 94V-0 rated thermoplastic and feature molded-in guide pins and sockets for positive connector mating. Other features include wire outlets which provide for sufficient creep distance, plus mated assemblies are completely dust-proof. Additional economies are achieved through the use of strip-form contacts suitable for high-speed automatic machine terminations. For prototype, maintenance and repair applications, contacts are available in loose piece for easy termination with Tyco Electronics hand crimping tools. Performance Specifications Voltage Rating -- 250 VAC Current Rating -- 4 amperes -- 24 AWG [0.2mm2] Wire 5 amperes -- 22 AWG [0.3-0.4mm2] Wire 7 amperes -- 20 AWG [0.5-0.6mm2] Wire 8 amperes -- 18 AWG [0.8-0.9mm2] Wire 12 amperes -- 16 AWG [1.25-1.4mm2] Wire 15 amperes -- 14 AWG [2.0mm2] Wire Contact Resistance -- 10 milliohms max. (Initial) 20 milliohms max. (Final) Insulation Resistance -- 5000 milliohms min. (Initial) 2000 milliohms min. (Final) Dielectric Withstanding Voltage -- 2000 VAC/1 minute Operating Temperature -- -20C to +120C (Includes T-Rise) Insertion/Extraction Force -- Insertion--4 kg max. (Initial) -- 16-position Extraction--0.7 kg min. (Initial) -- 16-position Durability -- Tested to 1000 Mate/Unmate cycles 91 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Standard Blindmate Drawer Connectors (Continued) Plug Connectors, PC Board Mount .524 [13.30] Material and Finish Cable Mounted Products Housing -- Glass-filled polybutylene terephthalate (PBT), blue, 94V-0 rated Contacts -- Phosphor bronze, plated gold in contact area over nickel underplating; board mount tails are brass, plated tin over steel underplating 1.035 [26.3] Circuit No. .260 [6.60] 1.280 [32.5] .984 [25.0] Last Circuit No. 5.0xE=D .197 [5.00] C B A Related Product Data: Performance Specifications -- page 91 Mating Receptacles -- page 93 .260 [6.60] Technical Documents AMP Product Specification 108-5125 AMP Application Specification 114-5044 No. of Pos. 8 12 16 Dimensions B C 1.500 1.055 38.0 26.8 1.890 1.449 48.0 36.8 2.283 1.843 58.0 46.8 A 2.016 51.2 2.409 61.2 2.803 71.2 D .197 5.00 .591 15.0 .984 25.0 E Plug Connector Part Numbers 1 172653-2 3 172653-3 5 172653-1 Note: To ensure proper contact alignment, connectors must be mated during the soldering process. .027.003 [0.680.08] .169.012 [4.300.30] Dia. (2 Plcs.) .197.003 [5.000.08] .315012 [8.000.30] .390.003 [9.900.08] .390.003 [9.900.08] .524.012 [13.30.30] .260.003 .059.005 [6.600.08] [1.500.13] Dia. (Typ.) .260.003 [6.600.08] .197.003 [5.000.08] Recommended PC Board Layout Note: All part numbers are RoHS compliant. 92 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Standard Blindmate Drawer Connectors (Continued) Housings for Crimp Snap-In Contacts .756 [19.2] .984 [25.0] Material 1.035 [26.3] .260 [6.60] .524 [13.3] .559 [14.2] Polybutylene terephthalate (PBT), blue, 94V-O rated A Performance Specifications -- page 91 Crimp Snap-In Contacts -- page 94 Panel Cutout--page 94 C B Cable Mounted Products D Related Product Data 5xE=F .260 [6.60] .886 [22.5] Technical Documents AMP Product Specification 108-5125 AMP Application Specification 114-5044 .197 Pitch [5.60] Floating Bushing Receptacle .984 [25.0] .886 [22.5] .559 [14.2] D .756 [19.2] C A B .524 [13.3] 1.035 [26.3] Plug Receptacle Dimensions No. of Pos. A B C D E F 8 1.858 47.20 1.055 26.80 2.016 51.20 1.500 38.00 1 .197 5.00 2.252 57.20 1.449 36.80 2.410 61.20 1.890 48.00 3 2.657 67.20 1.843 46.80 2.803 71.20 2.283 58.00 5 20 3.039 77.20 2.236 56.80 3.197 81.20 2.677 68.00 7 1.378 35.00 24 3.433 87.20 2.630 66.80 3.591 91.20 3.071 78.00 9 1.772 45.00 12 16 .591 15.00 .984 25.00 Floating Bushing Size .118 3.00 .157 4.00 .118 3.00 .157 4.00 .118 3.00 .157 4.00 .157 4.00 .118 3.00 .157 4.00 Plug Part Panel Mount Numbers Hole Diameter .130 172070-1 3.30 .169 172070-3 4.30 .130 172069-1 3.30 .169 172069-3 4.30 .130 172068-1 3.30 .169 172068-3 4.30 .169 173033-3 4.30 .130 172625-1 3.30 .169 172625-3 4.30 Part Numbers 172063-1 172063-3 172061-1 172061-3 172059-1 172059-3 173032-3 172624-1 172624-3 Note: All part numbers are RoHS compliant. 93 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Standard Blindmate Drawer Connectors (Continued) Crimp Snap-In Contacts (Hermaphroditic) .126 [3.20] Material and Finish Cable Mounted Products Phosphor bronze, plated gold in contact area (for length of .236 [6.0] from tip), with entire contact underplated nickel .791 [20.1] Related Product Data Performance Specifications -- page 91 Housings -- page 93 .146 [3.70] Technical Documents AMP Instruction Sheets 408-097J, 408-098J, 408-151J Wire Size Range Insulation Dia. Range AWG mm2 24-20 0.2-0.6 20-16 0.5-1.4 18-14 0.8-2.0 Part Numbers Applicator for AMP-O-LECTRIC Loose Piece Machine* Contact Strip Form .059-.077 1.50-1.95 .071-.130 1.80-3.30 .091-.154 2.30-3.90 Hand Tool Numbers 170311-1 170313-1 567324-2 724632-1 170484-1 170485-1 567241-2 724787-1 170312-1 170314-1 567325-2 724639-1 *Applicators are for Model "K" machines. Consult Tyco Electronics for applicators for other bench machines and leadmaking machines. Notes: 1. For applicable wire, use wire specified in UL 1015 or 1007. Notes: 2. Contacts for 18-14 AWG [0.8-2.0mm2] wire are used at the four corners of the connector as power contacts (8 required per assembly). Extraction Tool Part Number 723986-1 Recommended Panel Cutout .209.012 [5.300.30] (2 Plcs.) .106.012 [2.700.30] (2 Plcs.) No. of Pos. 8 .012 L[.0.30] J .012 K[.0.30] 12 .008 [0.20R] Max. 16 20 .169.012 [4.300.30] or .209.012 [5.300.30] Dia. (2 Plcs.) .524.012 [13.300.30] 24 Rear Panel Mount Dimensions J K L 1.913 1.500 1.110 48.60 38.00 28.20 2.307 1.890 1.504 58.60 48.00 38.20 2.701 2.283 1.898 68.60 58.00 48.20 3.094 2.677 2.291 78.60 68.00 58.20 3.488 3.071 2.685 88.60 78.00 68.20 .209 [5.30] .941.012 [23.900.30] Rear Panel Mount Note: Mounting holes of .209 [5.30] dia. are used when mounting receptacle housings with .157 [4.0] long floating bushings and the mating plug housings. Panel thickness is .063 [1.60]. Panel cutout shown above is for use with plug housings. For receptacle housings, use the mirror-image cutout. Note: All part numbers are RoHS compliant. 94 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Mini-Drawer Connectors Product Facts Combine signal circuits and power circuits into one connector Power circuits can be used for high current of up to 15A Signal circuits accept CT connector in the back, reducing harnessing costs Power circuits use crimptype tab and receptacle contacts Meet requirements for creepage distance and spatial distance for primary power supply as set forth in IEC-950, safety specifications for business machines and OA equipment. Creepage distance on active power side: 5mm Spatial distance on active power side: 4.5mm Technical Documents Product Specification 108-60022 Application Specification 114-5182 Cable Mounted Products Hybrid Mini-Drawer Connectors are designed for use in rack and panel application to serve as an I/O connector for copying machines, laser-beam printers and other OA equipment. They provide an economical means of combining into one connector signal circuits and power circuits which were packaged separately in the past. A major design feature of these Hybrid Mini-Drawer Connectors is that MiniDrawer Connectors mate with one another on the connector mating side and in the back, signal circuits accept a pre-terminated CT receptacle connector. Also, for power circuits, crimp-type power contacts are used by inserting them into the four corners of Mini-Drawer Connector. The housing has an integrated guide-pin and socket to facilitate mating of the connector halves. Provision is also made to prevent dust from entering. This product line includes: 12-position connector (4 positions for power and 8 positions for signal circuits) 24-position connector (4 positions for power and 20 positions for signal circuits) 32-position connector (4 positions for power and 28 positions for signal circuits) Performance Data Voltage Rating -- 250V AC (power) 30V AC (signal) Current Rating -- 15A max. (power) 2A max. (signal) Contact Resistance -- 10mm max. (power) 40mm max. (signal) Insulation Resistance -- 100M max. Dielectric Withstanding Voltage -- 1.8KV AC/min. (power) 1.0KV AC/min. (signal) Durability -- 3,000 cycles min. Drawer Connectors are available in the following types depending on application: For details contact our Sales Department Mini-Drawer Connectors Standard Drawer Connectors High Current Drawer Connectors. Note: All part numbers are RoHS compliant. 95 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Mini-Drawer Connectors (Continued) Standard Width Cable Mounted Products Plugs Receptacles Type Plug Receptacle Plug Receptacle Part Number 292180-1 292184-1 1-292183-2 1-292186-2 Number of Power Contacts 2 2 6 6 Number of Signal Contacts 4 4 12 12 L W 33 33 67 67 16.4 16.4 19 19 Part Number 1-292187-2 2-292190-2 3-292187-2 4-292190-2 2-292189-3 1-292192-3 Number of Power Contacts 3 3 4 4 3 3 Number of Signal Contacts 5 5 5 5 7 7 L W 47.5 43.5 54.5 50.5 51.5 47.5 15 12 13.5 12 15 12 Slim Width Plugs Receptacles Type Plug Receptacle Plug Receptacle Plug Receptacle Note: All part numbers are RoHS compliant. 96 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Mini-Drawer Connectors (Continued) Power Contacts Material Copper alloy For finish, see table below. Finish Codes Receptacle Cable Mounted Products 1) Over nickel underplated, contact area: gold plated, crimp area: tin plated 2) Tin plated all over. Hand Tool AWG #20-24 Part No. 934199-1 (411-5662) AWG #16-20 Part No. 934198-1 (411-5661) Tab Receptacle Assembly Wire Range mm2 AWG Material and Finish Housing -- Thermoplastic, black Contact -- Copper alloy, gold plated on mating side over nickel underplate, tin plated on CT mating side over nickel underplate. Wire Ins. Dia. 24-20 0.2-0.5 1.4-2.6 20-16 0.5-1.25 1.6-2.8 Plating Code 1 2 1 2 Receptacle Part Number Strip Form 179317-2 1-179317-2 179316-2 1-179316-2 Tab Part Number Strip Form 179322-2 1-179322-2 179321-2 1-179321-2 Section X-X Side V Section Y-Y Side W Panel Cutout No. of Pos. (Power/ Signal) A B C D E F G 12 (4-8) 24 (4-20) 32 (4-28) 56.0 68.0 76.0 47.0 59.0 67.0 6.0 18.0 26.0 24.1 36.1 44.1 31.8 43.8 51.8 31.4 43.4 51.4 38.0 50.0 58.0 H Mini-Drawer Receptacle Assembly Part No. Required Number of Power Contact Required Number of CT Connector 32.4 44.4 52.4 292185-8 2-292185-0 2-292185-8 4 4 4 4 Pos. x 2 10 Pos. x 2 14 Pos. x 2 Dimensions Note: All part numbers are RoHS compliant. 97 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Mini-Drawer Connectors (Continued) Plug Assembly Material and Finish Cable Mounted Products Housing -- Thermoplastic, black UL94V-0 Contact -- Copper alloy, gold plated on mating side over nickel underplate, tin plated platen on CT mating side over nickel underplate. View S View T Panel Cutout No. of Pos. (Power/ Signal) A B C D E F G H Mini-Drawer Receptacle Assembly Part No. Required Number of Power Contact Required Number of CT Connector 12 (4-8) 24 (4-20) 32 (4-28) 56.0 68.0 76.0 47.0 59.0 67.0 6.0 18.0 26.0 24.1 36.1 44.1 36.0 48.0 56.0 31.4 43.4 51.4 33.4 45.4 53.4 38.0 50.0 58.0 292182-8 2-292181-0** 2-292181-8 4 4 4 4 Pos. x 2 10 Pos. x 2 14 Pos. x 2 Dimensions *12-Position connector is provided with sequential feature in one power circuit position. Other connector sizes have sequential feature in power circuits and signal circuits. **Optional part numbers offer sequential mating - see customer drawings for details. Note: All part numbers are RoHS compliant. 98 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Mini-Drawer Connectors (Continued) CT Receptacle Connectors to Mate with Signal Circuit Terminator with Insulation Displacement Contacts Receptacle Assemblies (Wire Application Side) Material and Finish Cable Mounted Products Housing -- UL94V-0 rated, glassfilled P.B.T. see chart below for color. Contact -- Pre-tinned phosphor bronze Wire Size -- AWG #28-26 (0.080.15mm2) Insulation Dia. -- 0.85-1.05mm Wire Size -- AWG #24 (0.20-0.22mm2) Insulation Dia -- 0.95-1.05mm2 (For AWG #24 wire, see notes under the table) 4-15 Positions Dimensions No. of Positions 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 B 4.8 6.8 8.8 10.8 12.8 14.8 16.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8 C 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0 3 Position 2 Position Part Number Receptacle Assembly** AWG #28-26* AWG #24*** 173977-2 2-179694-2 173977-3 2-179694-3 173977-4 2-179694-4 173977-5 2-179694-5 173977-6 2-179694-6 173977-7 2-179694-7 173977-8 2-179694-8 173977-9 2-179694-9 1-173977-0 3-179694-0 1-173977-1 3-179694-1 1-173977-2 3-179694-2 1-173977-3 3-179694-3 1-173977-4 3-179694-4 1-173977-5 3-179694-5 * The color of housing is natural. Other colors available include blue, yellow and black. For details contact our Sales Department ** For wire to be used, contact our Sales Department as there are wires that have been tested by us and can be recommended for your use. *** The color of housing is gray. Note: All part numbers are RoHS compliant. 99 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 Power Connectors & Interconnection Systems AMP Drawer Series Connectors -- Hybrid Mini-Drawer Connectors (Continued) CT Receptacle Contacts to Mate with Signal Circuit Termination with Crimp Type Contacts Receptacle Contact Wire Size AWG (mm2) 30-26 (0.05-0.12) 26-22 (0.12-0.35) Insulation Dia. (mm) Material and Finish 0.65-1.35 Phosphor bronze (0.20mm thickness), tin plated 0.93-1.5 Part Number Strip Form LP 179609-1 -- 179227-1 179518-1 Hand Tool 234169-1 (411-5711) 91572-1 (408-8547) Cable Mounted Products Note: Loose piece contacts, being small in size, are supplied in the form of a comb with 10 pieces on 7.5mm pitch. There is a slit at the root of each contact and it can be snapped off easily. 2 Position 3 Position Receptacle Housing Material UL94-0 rated, 66 nylon, natural color (white) 4 Position 4-15 Positions No. of Positions 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Dimensions A 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 B 4.8 6.8 8.8 10.8 12.8 14.8 16.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8 C 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0 Part Number Receptacle Assembly* 179228-2 179228-3 179228-4 179228-5 179228-6 179228-7 179228-8 179228-9 1-179228-0 1-179228-1 1-179228-2 1-179228-3 1-179228-4 1-179228-5 * The color of housing is natural. Other colors available include blue, yellow and black. For details contact our Sales Department Note: All part numbers are RoHS compliant. 100 Catalog 1773096 Revised 7-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666