Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 1/12
TA-I TECHNOLOGY CO., LTD
Ceramic Substrate
1. Scope :
This specification applies for the RM06 Series of thick film chip resistors made by TA-I.
2. Construction:
3. Type Designation:
RM 06 J TN 103
Product Code Size Tolerance Packaging Nominal
RM : Chip Resistor Power Rating Resistance
06-0603(1608) 1/10W J - ±5% T - Paper Tape 3 digits, e.g.,:
G - ±2% (E-24) 103 = 10kΩ
F - ±1% 0 = 0
Ω
D - ±0.5% 4 digits, e.g.,:
B - ±0.1% (E-96) 1540 = 154Ω
43R2 = 43.2Ω
Ni Plating
Sn Plating
Resistive Element
+N: Lead-Free
Special :
L : 06 –2mm pitch
paper Tape
Conductor :
(Lead-free or with lead )
Over Coat (Color : Black)
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 2/12
TA-I TECHNOLOGY CO., LTD
4. Dimensions:
UNIT: mm
Type L W C d t
RM06
1.60±0.10
0.80±0.10 0.30±0.20
+0.2
0.30
-0.1
0.45±0.10
5. Ratings & Characteristics :
Resistance Range(Ω)
Type
Power
Rating
at 70℃
Rated
Voltage
Max.
Working
Voltage
Max.
Over-
Load
Voltage
T.C.R
(PPM/℃)B(±0.1%)
E-96
D(±0.5%)
E-96
F(±1%)
E-96
G(±2%)
E-24
J(±5%)
E-24
±100 10Ω-560kΩ 10Ω-1MΩ 10Ω-1MΩ
±200 1M＜R≦10MΩ 10Ω-10MΩ 10Ω-10MΩ
RM06 1/10W Refer 5.2 50V 100V
±400 1Ω-9.1Ω 1Ω-9.1Ω 1-9.1Ω
10M＜R≦22MΩ
OΩ THICK FILM CHIP RESISTORS
Type Rated Current Max Overload Current Resistance Range
RM06 1A 2.5A
50mΩ MAX
2. Operating Temp(℃): : -55℃ 〜 +125℃
Note : Except for the above standardized products , we also provide the customized products.
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 3/12
TA-I TECHNOLOGY CO., LTD
5.1 Derating Curve :
For resistors operated at ambient temperature over 70℃ , power rating shall be derated in
accordance with figure 1.
P max.
100
Power ratio ( % )
50
0
-55 50
70 100 125
Ambient
Temp. (
°
C )
Figure 1
5.2 Rated Voltage:
The rated voltage is calculated by the following formula:
E = P * R E=Rated Voltage(V)
P=Rated Power(W)
R=Resistance Value(Ω)
E.G. : What is RM06JTN102 the rated voltage ?
RM06JTN102 P:1/10W ; R:102 = 1KΩ = 1000Ω
E = 0.1(W) * 1000(Ω) = 10 (V)
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 4/12
TA-I TECHNOLOGY CO., LTD
6. Reliability Tests: (As specified in JIS C 5202)
Test Items Reference
standard Condition of Test Test Limits
Temperature Coefficient of
Resistance JIS-C5202-5.2 -55〜 +125 ℃ Refer 5.0
Short Time Overload JIS-C5202-5.5 2.5 X rated voltage for 5 sec
± (1% + 0.05Ω )
0Ω : 50mΩ or less
Intermittent Overload JIS-C5202-5.8 3.0 X rated voltage or Max Overloading
voltage ,1sec “ON” , 25sec “OFF” , 10000 cycle
± (5.0% + 0.1Ω)
0Ω : 50mΩ or less
Load Life JIS-C5202-7.10 1000 hours at rated voltage, 70℃ , 1.5hours
“ON “, 0.5hour “OFF”
0.5%,1%:±(1.0%+0.05Ω)
2%,5%:±(3.0%+0.1Ω)
0Ω : 100mΩ or less
Load Life with Humidity JIS-C5202-7.9 1000 hours at rated voltage , 40±2℃,
90~95% RH 1.5hours “ON “, 0.5hour “OFF”
0.5%,1%:±(1.0%+0.05Ω)
2%, 5%:±(3.0%+0.1Ω)
0Ω : 100mΩ or less
Without mechanical damage
Rapid Change of Temperature JIS-C5202-7.4 -55℃ (30 min. ) / +155 ℃(30 min. ) 5 cycles
0.5%,1% : ±(0.5%+0.05Ω)
2%, 5% :±(1.0%+0.05Ω)
0Ω : 50mΩ or less
Solderability
JIS-C5202-6.11 245±5℃ solder, 2±0.5 sec dwell.
Solder : Sn96.5 / Ag3.0 / Cu0.5
At least 95% of surface area
of electrode shall be covered
with new solder.
Robustness of Termination
(Bending) JIS-C5202—6.1 3mm deflection
0.5%,1%:±(0.5%+0.05Ω)
2%,5%:±(1.0%+0.05Ω)
0Ω: 50mΩ or less
Dielectric Withstanding
Voltage (Voltage Proof) JIS-C5202-5.7 Applying voltage :
300V for a minute .
No abnormalities such as
flashover, burning dielectric
breakdown shall appear.
Insulation Resistance JIS-C5202-5.6 Applying voltage 100V for 1 minute. ≧1GΩ
Resistance to Dry Heat JIS-C5202-7.2 125±5℃ for 96±4Hrs
0.5%,1% :±(1.0%+0.05Ω)
2%,5% : ±(2.0%+0.1Ω)
0Ω: 50mΩ or less
Resistance to Solder Heat JIS-C5202-6.10 270 ±5℃ solder , 10 ±1 sec dwell .
0.5%,1%:±(0.5%+0.05Ω)
2%, 5%:±(1.0%+0.05Ω)
0Ω: 50mΩ or less
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 5/12
TA-I TECHNOLOGY CO., LTD
Note* : RCWV : Rated continuous working voltage .
7. Marking :
7.1 ±2% & ±5%(E24)
Resistance value is expressed by 3 digits, the first two digits represent the significant figures of
nominal resistance value inΩ, and the third digit represents exponent for base of 10.
E.G. :, 472 = 47×102 = 4700Ω = 4.7KΩ
7.2 ±1% (E96 )
Resistance value is expressed by 4 digits or 3digits , the first three digits represent the significant
figures of nominal resistance value inΩ, and the fourth digit represents exponent for base of 10.
E.G. : 4701 = 470×101 = 4700Ω = 4.7K
Whisker
SONY
SS-00254-8
Component , Lead-Free Soldering part 8 :
Solder Heat Resistance Test for SMD. Lead-
Free Soldering “
Temp. Cycles :
-35 ± 5℃ / 125 ± 5℃ , Keep 7 min
Testing duration : 500±4 hours
Temp. Humidity Chambers:
Temperature : 85℃
Humidity : 85% RH
Testing duration : 500±4 hours .
Whisker formation :
50 um or less .
Resistance to Solder Heat SONY
SS-00254-5
Component , Lead-Free Soldering part 5 :
Solder Heat Resistance Test for SMD. Lead-
Free Soldering “
Flow Solder :
Pre – heat : 100 to 105 ℃ 30±5 sec
Temperature : 260±3℃ 10 +1/ -0 sec
The entire sample shall be dipped in solder.
The specimen shall be stored at standard
atmospheric conditions for 1 hour .
Iron Solder :
Bit temperature : 350 ±10℃
Application time of soldering iron : 3 +1/- 0sec
Apply the soldering iron to the electrode .
The specimen shall be stored at standard
atmospheric conditions for 1 hour , after
which the measurements shall be made
Electrical characteristics shall be
Satisfied .
Without distinct deformation in
appearance
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 6/12
TA-I TECHNOLOGY CO., LTD
7.3 ±1%(RM06/E96)
When the marking space is too small in such small-sized resistors as RM06, the marking can not
made by 4 digits and may be made by two digits combined with one English capital.
Symbol for E96 series nominal resistance value
Symbol E96 Symbol E96 Symbol E96 Symbol E96
01 100 25 178 49 316 73 562
02 102 26 182 50 324 74 576
03 105 27 187 51 332 75 590
04 107 28 191 52 340 76 604
05 110 29 196 53 348 77 619
06 113 30 200 54 357 78 634
07 115 31 205 55 365 79 649
08 118 32 210 56 374 80 665
09 121 33 215 57 383 81 681
10 124 34 221 58 392 82 698
11 127 35 226 59 402 83 715
12 130 36 232 60 412 84 732
13 133 37 237 61 422 85 750
14 137 38 243 62 432 86 768
15 140 39 249 63 442 87 787
16 143 40 255 64 453 88 806
17 147 41 261 65 464 89 825
18 150 42 267 66 475 90 845
19 154 43 274 67 487 91 866
20 158 44 280 68 499 92 887
21 162 45 287 69 511 93 909
22 165 46 294 70 523 94 931
23 169 47 301 71 536 95 953
24 174 48 309 72 549 96 976
Symbol for multipliers
Symbol A B C D E F G H X Y Z
multipliers 100 101 102 103 104 105 106 107 10-1 10-2 10-3
E.G : 02C = 102×102 = 10.2kΩ
Notes :
When the resistance value is not in the list of E96 , 3 digitals with underline in E-24 series
is used as mark .
E.G. :
0603 , 120Ω , 1% Marking is 121
7.4 ±1%( E96/3digitals)
The resistance value by 3 digits is requirement for customer.
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 7/12
TA-I TECHNOLOGY CO., LTD
8. Taping & Reel :
8.1 Taping Dimensions
8.1.1 4 mm pitch paper :
8.1.2 2 mm pitch paper :
Paper Tape
4 mm pitch 2 mm pitch
Package
Type Size 178mm/R 250mm/R 178mm/R 250mm/R
Bulk
RM 06 5000 10000 10000 20000 20000
Packing Type A B W F E P1 P2 P0 D0 T
Paper RM06 1.1±0.1 1.9±0.1 8.0±0.2 3.5±0.05 1.75±0.1 4.0±0.1 2.0±0.05 4.0±0.1
+0.1
ψ1.5
-0
0.64±0.1
Packing Type A B W F E P1 P2 P0 D0 T
Paper RM06 1.1±0.1 1.9±0.1 8.0±0.2 3.5±0.05 1.75±0.1 2.0±0.1 2.0±0.1 4.0±0.1
+0.1
ψ1.5
-0
0.64±0.1
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 8/12
TA-I TECHNOLOGY CO., LTD
8.1.3 Bulk Case Specifications:
8.2 Reel Specifications:
UNIT: mm
Type ψA ψB ψC W T
RM06 178.0 ± 2.0 60.0 ± 1.0 13.0 ± 1.0 9.0 ± 1.0 11.5 ± 1.0
8.3. Peel –off force :
Peel –off force of paper and blister tape is in accordance with “JIS-C5202 ”
that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute.
pull
top cover tape 300 mm/min
10〜15∘ standard: 0.1 ~ 0.7 N
carrier tape
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 9/12
TA-I TECHNOLOGY CO., LTD
9. Label :
9.1 Manufacture Label :
Date Code Resistance Tolerance Type
Lot No:
9.2 Customer Label ( By customer request ):
Lead-Free Products
Product Spec.
Customer No:
Date
Year Month
10. Recommended land patterns :
Dimension ( mm )
Land pattern
Type Size a b c
RM 06 (0603 ) 0.7~0.9 2.0~2.2 0.8~1.0
QTY: 5000 PCS
102 J
00860166K- 0008 0603
TA-I TECH LEAD FREE
0603 5%(T) 1KΩ
105A702723 RM06JTN102
04.05.21
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 10/12
TA-I TECHNOLOGY CO., LTD
11. Recommend IR – Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5)
Peak : 250
0
5
−
+℃ , 5 sec
Pre – heat Zone : 150 to 180 ℃, 90±30 sec
Soldering Zone : 230℃ or higher , 30±10 sec
12. Storage Conditions:
Temperature : 5 to 35 ℃
Related Humidity :40% to 75% RH
13. Shelf Life :
2 Years from manufacturing date.
14. ECN :
Engineering Change Notice: The customer will be informed with ECN if there is significant
modification on the characteristics and materials described in Approval Sheet.
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 11/12
TA-I TECHNOLOGY CO., LTD
15. Manufacturing Country & City :
TA-I TECHNOLOGY CO., LTD. ( Taiwan– Tao Yuan )
Tel: 886-3-3246169 Fax : 886-3-3246167
Associated companies :
(1) FORTUNE TASK RESISTOR FACTORY ( China – Dongguan )
Tel : 86-769-8339-4790〜3 Fax : 86-769-8339-4794
(2) TA-I TECHNOLOGY (DONGGUAN ) CO., LTD. ( China –Dongguan )
Tel : 86-769-8339-4790〜3 Fax : 86-769-8339-4794
(3) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China – Su Zhou)
Tel :86- 512-63457879 Fax : 86-512-63457869
(4) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia – Pulaupinang )
Tel :604- 3900480 Fax : 604-3901481
(5) P.T.TAI ELECTRONICS Indonesia ( Indonesia – Jakarta )
Tel :002-62-21-44820254 Fax : 002-62-21-44820256
Document No. TRM-060S004F
Issued date 2007/07/17
Thick Film Chip Resistors
(Lead-Free for RM06 Series) page 12/12
TA-I TECHNOLOGY CO., LTD
Revise record
Date Content Owner
Nov.25.2005
4. Ratings & Characteristics :
Adding Rating Voltage
5. Reliability Tests:
Adding to Whisker & Resistance to soldering heat
7.3 Storage Conditions:
Deleted to Storage Conditions
8.2 Customer Label
Adding to Customer Label
10. Recommend IR – Reflow profile
Adding to Recommend IR – Reflow profile
11. Storage Conditions:
Adding to Storage Conditions:
12. Shelf Life
Adding to Shelf Life :
Hank Liu
Jul.10.2006
2. Conductor : Adding to (Lead-free or with lead)
3. Type Designation: 06-0603 changed 06-0603(1608)
(E-24) 103 = 103Ω = 10kΩ changed 103 = 10kΩ
5. Ratings & Characteristics : Resistance Range(Ω) :
B(±0.1%) E-96 (TCR±100): 56Ω-560kΩ changed 10Ω-560KΩ
D(±0.5%)E-96(TCR±100) : 56Ω-560kΩ changed 10Ω-1MΩ
F(±1%)E-96 (TCR±200) : Adding To 1M＜R≦10MΩ
J(±5%)E-24 (TCR±400) : : Adding To 10M＜R≦20MΩ
9.1 Manufacture label :
Series number 3 codes changed to 4 codes
15. Manufacturing Country & City:
Adding TA-I TECHNOLOGY (DONGGUAN ) CO., LTD
Vincent
Jul.17.2007
5. Ratings & Characteristics :
Resistance Range (Ω) :
Adding to 22MΩ for 5% tolerance.
Vincent
