3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
DO-15
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix (e.g. SA5.0C, SA170CA)
Electrical characteristics apply in both directions
NOTES :
2. Mounted on Copper Leaf area of 1.6 X 1.6" (40X40 mm) per F ig. 5
1. Non-repetitive current pulse, per Fig.3 and derated above T
A
= 25
o
C per Fig.2.
SA5.0
THRU
SA170CA
VOLTAGE RANGE - 5.0 to 170 Volts
PEAK PULSE POWER - 500 Watts
TECHNICAL SPECIFICATIONS OF
TRANSIENT VOLTAGE SUPPRESSOR
RECTIFIER SPECIALISTS
R
DC COMPONENTS CO., LTD.
FEATURES
* Glass passivated junction
* 500 Watts Peak Pulse Power capability on
10/1000 µs waveform
* Excellent clamping capability
* Low zener impedance
* Fast response time
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: Color band denotes positive end (cathode)
except bidirectional types
* Mounting position: Any
* Weight: 0.4 gram
Steady State Power Dissipation at T
L
= 75
o
C
Lead Lengths .375*( 9.5 mm ) ( N ote 2 )
Peak Forward Surge Current, 8.3ms single half sine-wave
superimposed on rated load( JEDEC Method ) ( Note 3 )
Maximum Instantaneous Forward Voltage at 35A
for Unidirectional
Only
SYMBOL
I
FSM
V
F
T
J
, T
STG
Volts
-65 to + 175
0
C
UNITS
Amps
Peak Pulse Power Dissipation on 10/1000 µs waveform
(Note1,FIG
.
1) Minimum 500
70
3.5
VALUE
Operating and Storage Temperature Range
P
PPM
Watts
P
M (AV)
Watts
1.0
168
NEXT
BACK
EXIT
NEXT
BACK
EXIT
NEXT
BACK
EXIT
R
DC COMPONENTS CO., LTD.
SA (500W) SERIES TRANSIENT VOLTAGE SUPPRESSORS
SA5.0 6.40 7.30 10 5.0 600 52.0 9.6
SA5.0A 6.40 7.00 10 5.0 600 54.3 9.2
SA6.0 6.67 8.15 10 6.0 600 43.9 11.4
SA6.0A 6.67 7.37 10 6.0 600 48.5 10.3
SA6.5 7.22 8.82 10 6.5 400 40.7 12.3
SA6.5A 7.22 7.98 10 6.5 400 44.7 11.2
SA7.0 7.78 9.51 10 7.0 150 37.8 13.3
SA7.0A 7.78 8.60 10 7.0 150 41.7 12.0
SA7.5 8.33 10.2 1.0 7.5 50 35.0 14.3
SA7.5A 8.33 9.21 1.0 7.5 50 38.8 12.9
SA8.0 8.89 10.9 1.0 8.0 25 33.3 15.0
SA8.0A 8.89 9.83 1.0 8.0 25 36.7 13.6
SA8.5 9.44 11.5 1.0 8.5 10 31.4 15.9
SA8.5A 9.44 10.4 1.0 8.5 10 34.7 14.4
SA9.0 10.0 12.2 1.0 9.0 5.0 29.5 16.9
SA9.0A 10.0 11.1 1.0 9.0 5.0 32.5 15.4
SA10 11.1 13.6 1.0 10.0 3.0 26.6 18.8
SA10A 11.1 12.3 1.0 10.0 3.0 29.4 17.0
SA11 12.2 14.9 1.0 11.0 3.0 24.9 20.1
SA11A 12.2 13.5 1.0 11.0 3.0 27.4 18.2
SA12 13.3 16.3 1.0 12.0 3.0 22.7 22.0
SA12A 13.3 14.7 1.0 12.0 3.0 25.1 19.9
SA13 14.4 17.6 1.0 13.0 3.0 21.0 23.8
SA13A 14.4 15.9 1.0 13.0 3.0 23.2 21.5
SA14 15.6 19.1 1.0 14.0 3.0 19.4 25.8
SA14A 15.6 17.2 11.0 14.0 3.0 21.5 23.2
SA15 16.7 20.4 1.0 15.0 3.0 18.8 26.9
SA15A 16.7 18.5 1.0 15.0 3.0 20.6 24.4
SA16 17.8 21.8 1.0 16.0 3.0 17.6 28.8
SA16A 17.8 19.7 1.0 16.0 3.0 19.2 26.0
SA17 18.9 23.1 1.0 17.0 3.0 16.4 30.5
SA17A 18.9 20.9 1.0 17.0 3.0 18.1 27.6
SA18 20.0 24.4 1.0 18.0 3.0 15.5 32.2
SA18A 20.0 22.1 1.0 18.0 3.0 17.2 29.2
SA20 22.2 27.1 1.0 20.0 3.0 13.9 35.8
SA20A 22.2 24.5 1.0 20.0 3.0 15.4 32.4
SA22 24.4 29.8 1.0 22.0 3.0 12.7 39.4
SA22A 24.4 26.9 1.0 22.0 3.0 14.1 35.5
SA24 26.7 32.6 1.0 24.0 3.0 11.6 43.0
SA24A 26.7 29.5 1.0 24.0 3.0 12.8 38.9
SA26 28.9 35.3 1.0 26.0 3.0 10.7 46.6
SA26A 28.9 31.9 1.0 26.0 3.0 11.9 42.1
SA28 31.1 38.0 1.0 28.0 3.0 9.9 50.1
SA28A 31.1 34.4 1.0 28.0 3.0 11.0 45.4
SA30 33.3 40.7 1.0 30.0 3.0 9.3 53.5
SA30A 33.3 36.8 1.0 30.0 3.0 10.3 48.4
SA33 36.7 44.9 1.0 33.0 3.0 8.6 59.0
SA33A 36.7 4.06 1.0 33.0 3.0 9.4 53.5
170
NEXT
BACK
EXIT
NEXT
BACK
EXIT
NEXT
BACK
EXIT
R
DC COMPONENTS CO., LTD.
SA (500W) SERIES TRANSIENT VOLTAGE SUPPRESSORS
1.VBR measured after IT applied for 300µs. IT = Square Wave Pulse or equivalent.
2.For bidirectonal use C or CA suffixs for all types (ex. SA5.0C, SA170CA).
electrical characteristics apply in both directions.
3.For bidirectional types having VWM of 10 volts and less, the ID limit is doubled.
NOTES :
SA36 40.0 48.9 1.0 36.0 3.0 7.8 64.3
SA36A 40.0 44.2 1.0 36.0 3.0 8.6 58.1
SA40 44.4 54.3 1.0 40.0 3.0 7.0 71.4
SA40A 44.4 49.1 1.0 40.0 3.0 7.8 64.5
SA43 47.8 58.4 1.0 43.0 3.0 6.5 76.7
SA43A 47.8 52.8 1.0 43.0 3.0 7.2 69.4
SA45 50.0 61.1 1.0 45.0 3.0 6.2 80.3
SA45A 50.0 55.3 1.0 45.0 3.0 6.9 72.7
SA48 53.3 65.2 1.0 48.0 3.0 5.8 85.5
SA48A 53.3 58.9 1.0 48.0 3.0 6.5 77.4
SA51 56.7 69.3 1.0 51.0 3.0 5.5 91.1
SA51A 56.7 62.7 1.0 51.0 3.0 6.1 82.4
SA54 60.0 73.3 1.0 54.0 3.0 5.2 96.3
SA54A 60.0 66.3 1.0 54.0 3.0 5.7 87.1
SA58 64.4 78.7 1.0 58.0 3.0 4.9 103
SA58A 64.4 71.2 1.0 58.0 3.0 5.3 93.6
SA60 66.7 81.5 1.0 60.0 3.0 4.7 107
SA60A 66.7 73.7 1.0 60.6 3.0 5.2 96.8
SA64 71.1 86.9 1.0 64.0 3.0 4.4 114
SA64A 71.1 78.6 1.0 64.0 3.0 4.9 103
SA70 77.8 95.1 1.0 70.0 3.0 4.0 125
SA70A 77.8 86.0 1.0 70.0 3.0 4.4 113
SA75 83.3 102 1.0 75.0 3.0 3.7 134
SA75A 83.3 92.1 1.0 75.0 3.0 4.1 121
SA78 86.7 106 1.0 78.0 3.0 3.6 139
SA78A 86.7 95.8 1.0 78.0 3.0 4.0 126
SA85 94.4 115 1.0 85.0 3.0 3.3 151
SA85A 94.4 104 1.0 85.0 3.0 3.6 137
SA90 100 122 1.0 90.0 3.0 3.1 160
SA90A 100 111 1.0 90.0 3.0 3.4 146
SA100 111 136 1.0 100 3.0 2.8 179
SA100A 111 123 1.0 100 3.0 3.1 162
SA110 122 149 1.0 110 3.0 2.6 196
SA110A 122 135 1.0 110 3.0 2.8 177
SA120 133 163 1.0 120 3.0 2.3 214
SA120A 133 147 1.0 120 3.0 2.0 193
SA130 144 176 1.0 130 3.0 2.2 230
SA130A 144 159 1.0 130 3.0 2.4 209
SA150 167 204 1.0 150 3.0 1.9 268
SA150A 167 185 1.0 150 3.0 2.1 243
SA160 178 218 1.0 160 3.0 1.7 257
SA160A 178 197 1.0 160 3.0 1.9 259
SA170 189 231 1.0 170 3.0 1.6 304
SA170A 189 209 1.0 170 3.0 1.8 275
171
NEXT
BACK
EXIT
NEXT
BACK
EXIT
NEXT
BACK
EXIT
