HAD12-0.4-A+ - Condor Electronics, Inc.

Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc.

2311 Statham Parkway, Oxnard, CA 93033 • 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com/

FEATURES

• World-wide AC input ranges and safety standards

• Industry standard packages

• UL/CSA TUV/IEC approved—68 models toUL1950; CSA

C22.2 No. 234 L3; TUV certified to IEC950

• Burn-in with cycling; 3-year warranty

• Capacitors have highest CV & ripple current ratings

SPECIFICATIONS

AC Input

100, 120 and 240Vac: +10%, -13%; 215Vac: +12%, -11 %; 47 to 63Hz.

Tolerance for 230Vac operation is +15%,

-10%. Derate output current 10% for 50Hz operation.

DC Output

See voltage rating chart. Adjustment range ±5% minimum except HA

series.

Line Regulation

±0.05% for a 10% change.

Load Regulation

± 0.05% for a 50% load change.

Output Ripple

3mV +0.05% of output voltage, peak to peak maximum. All “3-terminal

regulator” outputs: 3mV +0.2% peak to peak maximum.

Transient Response

<50 microseconds for 50% load change.

Short Circuit Protection

Automatic current limit/foldback.

Overvoltage Protection

INTERNATIONAL+ LINEARS

Built-in on all 5V models, set at 6.2V ±0.4V. Other models use optional

overvoltage protection.

Remote Sensing

Provided on all models; open sense lead protection built-in (except HA

series).

Stability

±0.05% for 24 hours after warmup.

Temperature Rating

0 to 50°C full rated, derated linearly to 40% at 70°C.

Temperature Coefficient

±0.01%/°C maximum.

Efficiency

5V units: 45%; 12 and 15V units: 55%; 20 and 24V units: 60%.

Logic Inhibit and Current-Share

F & G models.

• MTBF 200,000+ hours per Mil Handbk 217D (most units)

• All electrolytic caps rated at 105ºC

• Transformer insulation meets Class F (155ºC)

• Exceed FCC and CISPR22 Class B conducted emissions

•marked to LVD

INTERNATIONAL+ LINEARS

Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc.

2311 Statham Parkway, Oxnard, CA 93033 • 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com/

)elgniS(ledoM egatloV tnerruC esaC

+A-5.1-2AHV2A5.1B

+A-3-2BHV2A3B

+A-6-2CHV2A6C

+A-9-2NHV2A9N

+A-21-2DHV2A21D

*+A-81-2EHv2A81E

+A-VO/5.1-5AHV5A5.1B

+A-VO/3-5BHV5A3B

+A-VO/6-5CHV5A6C

+A-VO/9-5NHV5A9N

+A-VO/21-5DHV5A21D

*+A-VO/81-EHV5A81E

*+A-VO/52-5FV5A52F

*+A-VO/53-5GV5A53G

*+A-791PCV5A05G

+A-9.0-51AHV21A9.0B

+A-7.1-21BHV21A7.1B

+A-4.3-21CHV21A4.3C

+A-1.5-21NHV21A1.5N

+A-8.6-21DHV21A8.6D

*+A-2-01-21EHV21A2.01E

)V21(*+A-51-51FV21A61F

+A-9.0-51AHV51A9.0B

+A-7.1-21BHV51A5.1B

+A-3-51CHV513C

+A-5.4-51NHV51A5.4N

+A-6-51DHV516D

*+A-9-51EHV519E

*+A-51-51FV51A51F

+A-5.0-42AHV42A5.0B

+A-2.1-42BHV42A2.1B

+A-4.2-42CHV42A4.2C

+A-6.3-42NHV42A6.3N

+A-8.4-42DNV42A8.4D

*+A-2.7-42EHV42A2.7E

*+A-21-42FV42A21F

)V82(+A-5.0-42AHV82A5.0B

+A-0.1-82BHV82A1B

+A-0.2-82CHV82A2C

+A-3-82NHV82A3N

+A-4-82DHV82A4D

*+A-6-82EHV82A6E

)V82(*+A-21-42FV82A01F

+A-5.0-84BHV84A5.0B

+A-1-84CHV84A1C

**+A-3-84DHV84A3D

*+A-4-84EHV84A4E

*+A-6-84FV84A6F

*Requires fan cooling.

**May require fan cooling.

)lauD(ledoM 1tuptuO 2tuptuO esaC

+A-VO/5.1-5AAHA5.1@V5A5.1@V5AA

+A-VO/3-5BBHA3@V5A3@V5BB

+A-VO/6-5CCHA6@V5A6@V5CC

+A-215AAHA2@V5A5.0@V51-9AA

+A-215BBHA3@V5A2.1@V51-9BB

**+A-215CCHA6@V5A5.2@V51-9CC

**+A-425AAHA2@V5A3.0@V42-81AA

+A-425BBHA3@V5A8.0@V42-81BB

+A-425CCHA6@V5A2@V42-81CC

+A-4.0-21DAHA4.0@V21+A4.0@V21-B

+A-4.0-51DAHA4.0@V51+A4.0@V51-B

+A-8.0-51AAHA8.0/A1@V51ot21+A8.0/A1@V51-ot21-AA

+A-5.1-51BBHA5.1/A7.1@V51ot21+A5.1/A7.1@V51-ot21-BB

+A-3-51CCHA3/A4.3@V51ot21+A3/A4.3@V51-ot21-CC

*+A-5-51DDHA5@V51ot21+A5@V51-ot21-E

+A-6.0-42AAHA6.0/A4.0@V42ot81+A8.0/A1@V42-ot81-AA

)elpirT(ledoM 1tuptuO 2tuptuO 3tuptuO esaC

+A-W61-AATHA2@V5A4.0/4.0@V51ot21+***A4.0/4.0@V51ot21-AA

+A-W04AABHA3@V5A8.0/1@V51ot21+***A8.0/1@V51ot21-AAB

**+A-W501BBCHA3@V5A0.3/4.3@V51ot21+***A3/4.3@V51ot21-BBC

+A-W06AACHA6@V5A8.0/1@V51ot21+***A8.0/1@V51ot21-D

+A-W-57BBCHA6@V5A5.1/7.1@V51ot21+***A1.1/7.1@V51ot21-BBC

+A-131PCA9@V5A5.1/7.1@V51ot21+***A1.1/7.1@V51ot21-BBN

*+A-W501BBDHA21@V5A5.1/7.1@V51ot21+***A1.1/7.1@V51ot21-BBD

*+A-W051CCDHA21@V5A3/4.3@V51ot21+***A3/4.3@V51ot21-CCD

**May require fan cooling.

*Requires fan cooling.

**May require fan cooling.

***No. 3 output usable at -5V, rate at 1/2 of 15V current rating.

DISK DRIVE/PRINTER SERIES

ledoM 1tuptuO 2tuptuO 3tuptuO esaC

+A-602PC)KP5.3(A3,V42A3,V5A1,V5BBC

+A-323PCA2@V5A4@V21A/NBB

FIXED DISK SERIES

ledoM 1tuptuO 2tuptuO 3tuptuO esaC

+A-973PCA6@V5+KPA6/5.3@V42+A2.1@V21-ro5-BBN

+A-894PCA6@V5+KPA01/5@V42+A5.0@V21-BBN

INTERNATIONAL+ LINEARS

Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc.

2311 Statham Parkway, Oxnard, CA 93033 • 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com/

INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS:

A CASE (WT. 1LB.) B CASE (WT. 2LBS.)

C CASE (WT. 4LBS.) D & CP510 CASE (WT. 7.5LBS.)

AC INPUT

3.100

[78.74mm]

[95.25mm]

3.75

0.25 [6.35mm]

OUTPUT

3.00

[76.20mm]

0.450

[10.16mm]

2.500

[63.50mm] 0.25

[6.35mm]

1.25

[31.75mm]

0.500

[12.70mm]

MTG. HOLES

6PL

0.188 [4.78mm] DIA.

4231

-OUT

+OUT

MAX. MAX.

0.35

[8.89mm]

OVP-12

AC INPUT

4.88

[123.95mm]

[101.60mm]

4.00

[41.40mm]

1.63

0.75

1.80

[45.72mm]

3.375

[85.72mm]

4.125

[104.78mm]

0.25

[6.35mm]

0.75

[19.05mm]

0.450

[11.43mm]

MAX.

3 14 2

+OUT

S+

S-

-OUT

DC OUTPUT

OPTIONAL

8PL

0.188 DIA.

MTG. HOLES

MAX.

[4.78mm]

0.25

[6.35mm]

[19.05mm]

OPTIONAL

OVP-12

0.188 DIA.

12PL

MTG. HOLES

[143.00mm] [123.83mm]

4.875

5.63

[104.78mm]

4.125

[63.50mm]

0.75 [19.05mm]

1.250 [31.75mm]

2.50

0.25

[6.35mm]

0.25 0.450

[11.43mm]

0.75

1.250

[31.75mm]

[19.05mm]

+OUT

S+

S-

-OUT

DC OUTPUT

AC INPUT

3 14 2

MAX.

[4.78mm]

4.88 [123.95mm]

INTERNATIONAL+ LINEARS

0.188 DIA.

16PL

MTG. HOLES

OVP-12

(OPTIONAL)

4.88

[123.95mm]

2.75

[69.85mm]

9.00 [228.60mm]

4.125

[104.78mm]

0.25

[6.35mm]

MAX.

[15.88mm]

0.50

[12.70mm]

0.75

[19.05mm]

1.250

[31.75mm]

MAX.

[7.62mm]

8.000 [203.20mm]

0.75 [19.05mm]

1.250

AC INPUT

3142-OUT -S +S +OUT

DC OUTPUT

.625 SQ.

[15.88mm]

RECTANGLE

1.125x.550

[28.58x13.97mm]

0.625 DIA.

[15.87mm]

2PL

[31.75mm]

0.625

0.30

[4.78mm]

Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc.

2311 Statham Parkway, Oxnard, CA 93033 • 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com/

INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS:

E CASE (WT. 10LBS.)

F CASE (WT. F5: 14LBS.; F15,24: 18LBS.)/G CASE (WT. G5: 19LBS.)

N CASE (WT. 7LBS.)

D.C. OUTPUT

0.218[5.54mm] DIA. MTG. HOLES

(16 PLACES) 0.375

[9.53mm]

1.50

[38.10mm]

MAX.

0.625

[15.88mm]

2.500

[63.50mm]

[9.53mm]

0.375

16.000

[406.40mm]

16.75

[425.45mm]

0.30

[7.62mm]

MAX.

3.50

[88.90mm]

CLEARANCE

AC INPUT

0.625

[15.88mm]

2.500

[63.50mm]

4.125

[104.78mm]

4.88

[123.95mm]

L CASE (WT. 1LB.)

INTERNATIONAL+ LINEARS

DC OUTPUT

-S

-OUT +OUT

AC INPUT

[28.58x13.97mm]

[28.58x19.69mm]

[15.87mm]

2 PLCS

16 PLCS

OPTIONAL

2.088

[53.04mm]

0.725 [18.42mm]

[76.20mm]

3.00

[104.78mm]

4.88

[123.95mm]

14.00 [355.60mm]

13.000 [330.20mm]

0.50 [12.70mm]

2.75 [69.84mm]

0..20 [5.08mm] MAX.

0.75 [19.05mm]

1.250 [31.75mm]

2.5 [63.50mm]

1.25 [31.75mm]

0.75 [19.05mm]

0.625 DIA. MTG.

1.125x.775 REC

0.625 SQ.

1.58 [40.13mm]

0.25 [6.35mm]

0.188 DIA. MTG.

1.125x0.550 REC

OVP 24

1.15 [29.21mm]

4.125

D.C.

OUTPUTS

OPTIONAL

OVP-12

0.75

16PL

MTG. HOLES

0.188 DIA.

MAX.

[13.34mm]

[104.78mm]

4.125

[6.35mm]

0.25

1.250

[31.75mm]

.75

[19.05mm]

7.00 [177.80mm]

1.250

[31.75mm]

[19.05mm]

[123.95mm]

4.88

[69.85mm]

2.75

6.250 [158.75mm]

-OUT

+OUT -S+S

[4.78mm]

0.375 ± 0.030

[9.53 ± 0.76mm]

AC INPUT

0.525

OUTPUT 3

V.ADJ. OUTPUT 2

V.ADJ.

OUTPUT 1

V.ADJ.

LEAD PROTRUSION

0.156 [3.96mm] DIA. MTG. HOLES

4 PLCS.

2.750 [69.85mm]

3.25 [82.55mm]

4.25 [107.95mm]

3.750 [95.25mm]

0.25 [6.35mm]

1.70

[43.18mm]

0.10 [2.54mm] MAX

Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc.

2311 Statham Parkway, Oxnard, CA 93033 • 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com/

INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS:

AA CASE (WT. 2LBS.) BB CASE (WT. 4LBS.)

CC CASE (WT. 7LBS.) BAA CASE (WT. 5LBS.)

AC INPUT

OPTIONAL

0.188 DIA.

8PL

MTG. HOLES

1.62

[41.15mm]

6.50

[165.10mm]

3.375

[85.73mm]

1.80

[19.05mm]

0.75

[45.72mm]

[101.60mm]

4.00

[146.05mm]

5.750

0.25

0.75

[19.05mm]

0.25

[6.35mm]

3 14 2

-OUT

OUTPUT

OVP-12

0.450

[11.43mm]

-S

COM

+OUT

MAX.

[4.78mm]

MAX.

OPTIONAL

OVP-12

0.188 DIA.

12PL

MTG. HOLES

6.250

[158.75mm]

4.88

[123.95mm]

[177.80mm]

7.00

2.50

[63.50mm]

4.125

[104.78mm]

0.75

1.250

0.75

1.250

AC INPUT

3 14 2

0.450

[11.43mm]

0.25

[6.35mm]

[31.75mm]

[19.05mm]

[31.75mm]

[19.05mm]

COM

-OUT

+OUT

-S

OUTPUT

[4.78mm]

MAX.

AC INPUT

MAX.

0.188 DIA.

MTG. HOLES

16PL

OUTPUT DC OUTPUT

10.25

[260.35mm]

[101.60mm]

4.00

[63.50mm]

2.50

9.250

[234.95mm]

0.50

[12.70mm]

[85.73mm]

3.375

0.25

[6.35mm]

0.75 [19.05mm]

1.250 [31.75mm]

0.75

[19.05mm]

1.250

[31.75mm]

0.450

[11.43mm]

+OUT -OUT

+S -S

+OUT

+S -S

-OUT

COM S

OVP-12

OPTIONAL

[4.78mm]

INTERNATIONAL+ LINEARS

0.188 DIA.

16PL

MTG. HOLES

4.88

[123.95mm]

2.75

[69.85mm]

8.375

[212.72mm] 0.50

[12.70mm]

9.38

[238.25mm]

1.250 [31.75mm]

0.75 [19.05mm]

[104.78mm]

4.125

0.625 MAX.

[15.88mm]

0.75

[19.05mm]

1.250

[31.75mm]

0.30

[7.62mm]

[6.35mm]

0.25

AC INPUT

3142

+OUT -OUT

OUTPUT

-OUT+OUT

OUTPUT 1 OUTPUT 2

MAX.

[4.78mm]

OVP

OPTIONAL

Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc.

2311 Statham Parkway, Oxnard, CA 93033 • 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com/

INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS:

CBB CASE (WT. 8LBS.) DBB CASE (WT. 11LBS.)

DCC CASE (WT. 12LBS.) NBB CASE (WT. 12LBS.)

MAX.

MTG. HOLES

16PL

OPTIONAL

OVP

4.88

[123.95mm]

2.75

[69.85mm]

[76.20mm]

3.00 7.500

[190.50mm]

11.00

[279.40mm]

4.125

[104.78mm]

0.25

[6.35mm] 0.525

[13.34mm]

1.250

[31.75mm]

0.75

[19.05mm]

1.250 [31.75mm]

0.75 [19.05mm]

COM -OUT+OUT

DC OUTPUT

+OUT

+S -S

-OUT

OUTPUT

-S

0.188 [4.78mm] DIA.

AC INPUT

0.188 DIA.

16PL

MTG. HOLES

MAX.

4.88

[123.95mm]

5.00 [127.00mm] 4.950 [125.73mm] 3.800

[96.52mm]

2.75

[69.85mm]

0.75 [19.05mm]

1.250 [31.75mm]

[7.62mm]

MAX.

0.30

4.125

[104.78mm]

[17.78mm]

[31.75mm]

1.250

0.75

[19.05mm]

14.25 [361.95mm]

AC INPUT

+OUT

-S

-OUT

OUTPUT

COM -OUT+OUT

DC OUTPUT

+S -S

0.700

0.25

[6.35mm]

OVP

OPTIONAL

[4.78mm]

0.25 [6.35mm]

0.625 [15.88mm]

MAX.

4.125

[104.78mm]

[123.95mm]

4.88

1.250 [31.75mm]

0.75 [19.05mm]

0.30 [7.62mm]

MAX.

2.75 [69.85mm]

7.000 [177.80mm]

11.00 [279.40mm]

[4.78mm]

0.50 [12.70]

1.250 [31.75mm]

0.75 [19.05mm]

DC OUTPUT

-S

-OUT

+OUT

COM

AC INPUT

1234

-S

+OUT

-OUT

0.188

MTG. HOLES

16 PLCS

INTERNATIONAL+ LINEARS

ADJ.

-V

ADJ.

V.ADJ.

I.LIMIT

0.50 [12.70mm]

2.500 [63.50mm]

0.75 [19.05mm]

14.000 [355.60mm]

15.00 [381.00mm]

3.75 [95.25mm]

[123.95mm]

[104.78mm]

4.125

0.75

[19.05mm]

2.500 [63.50mm]

0.625

[15.88mm]

0.25 [6.35mm]

DC OUTPUT

-S

-OUT +OUT

COM

+OUT

-OUT

-S

DC OUTPUT

AC INPUT

1324

0.188 DIA.

MTG. HOLES

16 PLCS

[4.78mm]