Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model
RFP
-
10
0
N
Features:
• DC – see chart
• 100 Watts
• Aluminum Nitride Ceramic
• Non-Nichrome Resistive
Element
• Welded Silver Leads
• Low VSWR
• 100% Tested
Flanged Resistors
100 Watts, 50Ω
General Specifications
Resistive Element Thick film
Substrate Aluminum nitride ceramic
Cover Alumina ceramic
Leads 99% pure silver (.005” thick)
Electrical Specifications
Attenuation Range: 1, 2, 3, 4, 5, 6, 9, 10, 20, 30 db
Frequency Range; DC – see chart
Power: 100 Watts
VSWR: 1.25:1
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. Operating temperature is -55ºC to 150ºC (see
chart for derating temperatures).
All dimensions in inches.
Specifications subject to change with out notice.
Outline Drawing
100NXXAF (097) Rev B
RoHS
Compliant
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Model
RFP
-
10
0N
Specifications:
Mounting Procedure: Power derating:
SUGGESTED MOUNTING PROCEDURES:
1. MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
2.
3. SOLDER LEADS IN PLACE USING AN APPROPPRIATE TYPE SOLDER
WITH A CONTROLLED TEMPERATURE IRON. KEEP LEAD
LENGTH AS SHORT AS POSSIBLE USING A SUGGESTED
POSITION DEVICE ON MOUNTING SURFACE AND SOLDER
IN PLACE USING AN APPROPRIATE TYPE SOLDER.
STRESS RELIEF METHOD.
100NXXAF (097) Rev B
RoHS
Compliant