GP05-10 THRU GP05-20 FRONTIER ELECTRONICS CO., LTD. HIGH VOLTAGE SILICON RECTIFIER FEATURES ! AVALANCHE OPERATION ! UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOND ! BEVELED ROUND CHIP ! LOW COST 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) .107(2.7) .080(2.0) MECHANICAL DATA ! CASETRANSFER MOLDED ! LEADSSOLDERABLE PER MIL-STD-202,METHOD 208 ! POLARITYCATHODE INDICATED BY COLOR BAND ! WEIGHT0.34 GRAMS (DO-41) 1.0(25.4) MIN CASE-DO41 DIMENSIONS IN INCHES AND (MILLIMETERS) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT .375(9.5mm) LEAD LENGTH AT TA=55C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE AT 4.0 VOLTAS(NOTE1) TYPICAL THERMAL RESISTANCE (NOTE 2) STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE SYMBOL VRRM VRMS VDC GP05-10 1000 700 1000 GP05-15 1500 1050 1500 GP05-18 1800 1260 1800 GP05-20 2000 1400 2000 UNITS V V V IO 0.5 A IFSM 30 A CJ 9 PF Rja TSTG TOP 50 - 55 TO + 150 - 55 TO + 150 ELECTRICAL CHARACTERISTICS (AT TA =25 C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL GP05-10 MAXIMUM FORWARD VOLTAGE AT IO DC VF MAXIMUM REVERSE CURRENT AT 25 IR MAXIMUM REVERSE CURRENT AT 100 IR GP05-15 GP05-18 2.0 5.0 50.0 NOTE 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS 2. BOTH LEADS ATTATCHED TO HEATSINK 20x 20x 1t(mm) COPPER PLATE AT LEAD LENTH 5mm 8-1 /W GP05-20 UNITS V A A FIG. 1-MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE LOAD A=20mm 100 A=10mm 80 A=5.5 mm 60 10mm 40 10mm 20 PC BOARD COPPER AREA 5.5!mm 0 0 20 40 60 80 FIG. 5-MAXIMUM FORWARD SURGE VS NUMBER OF CYCLES FORWARD SURGE CURRENT, AMPERES PK (HALF SINE-WAVE) IO-PERCENT OF AVERAGE RECTIFIED CURRENT (%) RATINGS AND CHARACTERISTICS CURVES GP05-10 THRU GP05-20 100 120 140 30 24 18 12 6 0 1 TA-AMBIENT TENMPERATURE ( ) 10 100 NO. OF CYCLES AT 60HZ PK AV RESISTIVE/INDUCTIVE LOADS 100 5 80 CAPACTIVE LOADS 10 FIG. 6-TYPICAL JUNCTION CAPACITANCE CJ-JUNCTION CAPACITANCE (PF) IO-PERCENT OF AVERAGE RECTIFIED CURRENT (%) FIG. 2-MAXIMUM CURRENT RATING CAPACITIVE LOAD, 10mm LEAD LENGTHS 20 60 10mm 40 10mm 20 PC BOARD COPPER AREA 5.5!mm 0 0 20 40 60 80 100 120 140 FIG. 3-MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE LOAD 100 10 1 1 10 100 1000 L=5mm VR-REVERSE VOLAGE (V) 100 L=10mm 80 L=20mm 60 10mm 10mm 20 COPPER AREA 5.5!mm 0 0 20 40 PC BOARD 60 80 FIG. 7 TYPICAL FORWARD CHARACTERISTICS 100 120 140 IF-FORWARD CURRENT (A) 40 INSTANTANEOUS REVERSE CURRENT MICROAMPERES TA-AMBIENT TENMPERATURE ( ) FIG. 4-TYPICAL REVERSE CHARCTERISTICS AT TJ=25 10 1.0 1.0 0.1 0.01 0.001 0.1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VF-FORWARD VOLAGE (V) .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE 8-2