SAW Components SAW RF filter Automotive telematics Series/type: Ordering code: B3514 B39941B3514H910 Date: Version: December 07, 2012 2.2 EPCOS AG 2012. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. SAW Components B3514 SAW RF filter 881.5/942.5 MHz Data sheet Application Low-loss RF filter for mobile telephone GSM 850/900 system, receive path Usable passband: Filter 1 (GSM850): 25 MHz Filter 2 (GSM900): 35 MHz Unbalanced to balanced operation of both filters Impedance transformation from 50 to 150 for both filters Suitable for GPRS class 1 to 12 Features Package size 3.0 x 2.5 x 0.98 mm3 Package code QCC10G RoHS compatible Approximate weight 0.027 g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Lead free soldering compatible with J - STD20C Passivation layer Elpas AEC-Q200 qualified component family Electrostactic Sensitive Device (ESD) Pin configuration1) 1,2 3,4 6 9 5,7,8,10 Output, balanced [Filter 1] Output, balanced [Filter 2] Input [Filter 2] Input [Filter 1] Case grounded 9 1 2 7,8 3 4 6 1) The recommended pin configuration usually offers best suppression of electrical crosstalk. The filter characteristics refer to this configuration. Please read cautions and warnings and important notes at the end of this document. 2 December 07, 2012 5, 10 SAW Components B3514 SAW RF filter 881.5/942.5 MHz Data sheet Characteristics Filter 1 (GSM850) Temperature range for specification: Terminating source impedance: Terminating load impedance: T = -40 C to +85 C 50 (unbalanced) ZS = ZL = 150 (balanced) || 56 nH min. max. -- typ. @ 25 C 881.5 -- MHz Center frequency fC Maximum insertion attenuation 869.0 ... 894.0 max MHz -- 1.8 2.2 dB Amplitude ripple 869.0 ... 894.0 MHz -- 0.8 1.1 dB ... 894.0 MHz -- 1.8 2.1 VSWR 869.0 Output amplitude balance (|S31/S21|) 869.0 ... 894.0 MHz -1.5 1.5 dB Output phase balance ((S31)-(S21)+180) 869.0 ... 894.0 -12.0 12.0 degree MHz abs Attenuation 10.00 480.00 915.00 1000.00 ... ... ... ... 480.00 849.00 1000.00 3000.00 MHz MHz MHz MHz Please read cautions and warnings and important notes at the end of this document. 46 30 23 30 3 52 34 27 34 December 07, 2012 -- -- -- -- dB dB dB dB SAW Components B3514 SAW RF filter 881.5/942.5 MHz Data sheet Characteristics Filter 2 (GSM900) Temperature range for specification: Terminating source impedance: Terminating load impedance: T = -40 C to +85 C 50 (unbalanced) ZS = ZL = 150 (balanced) || 68 nH min. max. -- typ. @ 25 C 942.5 Center frequency fC -- MHz Maximum insertion attenuation 925.0 ... 960.0 max MHz -- 1.9 3.01) dB Amplitude ripple 925.0 ... 960.0 MHz -- 0.9 1.8 dB ... 960.0 MHz -- 1.9 2.3 VSWR 925.0 Output amplitude balance (|S31/S21|) 925.0 ... 960.0 MHz -2.5 2.5 dB Output phase balance ((S31)-(S21)+180) 925.0 ... 960.0 -12.0 12.0 degree MHz abs Attenuation 10.00 480.00 880.00 905.00 980.00 1050.00 1) ... ... ... ... ... ... 480.00 880.00 905.00 915.00 1050.00 3000.00 MHz MHz MHz MHz MHz MHz 46 30 24 11 23 30 52 35 27 18 30 34 T = -25C to +75C : 2.5 dB Please read cautions and warnings and important notes at the end of this document. 4 December 07, 2012 -- -- -- -- -- -- dB dB dB dB dB dB SAW Components B3514 SAW RF filter 881.5/942.5 MHz Data sheet Maximum ratings Operable temperature range T -45/+125 C Storage temperature range DC voltage ESD voltage Input power at Tx bands: GSM850, GSM900 -45/+125 C 5 V 50 V Tstg VDC VESD PIN 15 dBm peak power of GSM signal duty cycle 4:8 Please read cautions and warnings and important notes at the end of this document. 5 December 07, 2012 SAW Components B3514 SAW RF filter 881.5/942.5 MHz Data sheet Transfer function Filter 1 Transfer function Filter 1 (wideband) Please read cautions and warnings and important notes at the end of this document. 6 December 07, 2012 SAW Components B3514 SAW RF filter 881.5/942.5 MHz Data sheet Transfer function Filter 2 Transfer function Filter 2 (wideband) Please read cautions and warnings and important notes at the end of this document. 7 December 07, 2012 SAW Components B3514 SAW RF filter 881.5/942.5 MHz Data sheet References Type B3514 Ordering code B39941B3514H910 Marking and package C61157-A7-A142 Packaging F61074-V8174-Z000 Date codes L_1126 B3514_LB_NB.s3p B3514_LB_WB.s3p S-parameters B3514_UB_NB.s3p B3514_UB_WB.s3p See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2012. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 8 December 07, 2012 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 9 December 07, 2012