O3853QDCARQ1 - TEXAS INSTRUMENTS

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 1Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Aluminum Electrolytic Capacitors

Axial High Temperature

Fig. 1

FEATURES

• Polarized aluminum electrolytic capacitors,

non-solid electrolyte

• Axial leads, cylindrical aluminum case, insulated

with a blue sleeve

• Mounting ring version not available in insulated form

• Taped versions up to case Ø 15 mm x 30 mm available for

automatic insertion

• Charge and discharge proof

• Extra long useful life: up to 8000 h at 125 °C, high

reliability

• Extended temperature range: 125 °C (usable up to

150 °C)

• Miniaturized, high CV-product per unit volume

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive, industrial and telecommunication

• Smoothing, filtering, coupling, decoupling, timing

• For use after very long storage (10 years) without voltage

applied

• Portable and mobile equipment (small size, low mass)

• Low mounting height boards, vibration and shock

resistant

• Outdoor applications, e.g. aerial amplifiers

MARKING

The capacitors are marked (where possible) with the

following information:

• Rated capacitance (in μF)

• Tolerance on rated capacitance, code letter in accordance

with IEC 60062 (M for ± 20 %)

• Rated voltage (in V) at 125 °C and 85 °C

• Date code, in accordance with IEC 60062

• Code indicating factory of origin

• Name of manufacturer

• Negative terminal identification

• Series number (118)

QUICK REFERENCE DATA

DESCRIPTION VALUE

Nominal case sizes

(Ø D x L in mm)

6.5 x 18

to 10 x 25

10 x 30

to 21 x 38

Rated capacitance range, CR4.7 μF to 10 000 μF

Tolerance on CR± 20 %

Rated voltage range, UR6.3 V to 200 V

Category temperature range -40 °C to

+125 °C

-55 °C to

+125 °C

Endurance test at 150 °C

(6.3 V to 100 V) 500 h 500 h

Endurance test at 125 °C 2000 h 3000 h

Useful life at 125 °C 4000 h 8000 h

Useful life at 40 °C, 

1.8 x IR applied 500 000 h 1 000 000 h

Shelf life at 0 V, 125 °C:

UR = 6.3 V to 63 V 500 h

UR = 100 V and 200 V 100 h

Based on sectional

specification IEC 60 384-4 / EN130 300

Climatic category IEC 60068 40 / 125 / 56 55 / 125 / 56

118 AHT

125 °C 125 °C

138 AML

high ripple,

low impedance

105 °C 120 ATC

very high

ripple

119 AHT-DIN

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 2Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in millimeters AND AVAILABLE FORMS

Fig. 2 - Forms BA and BR Fig. 3 - Form AA

SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)

(μF)

UR (V)

6.31016254063100200

4.7 - - - - - 6.5 x 18 6.5 x 18 -

10 - - - - - 6.5 x 18 6.5 x 18 -

15-------10 x 30

22 - - - - - 6.5 x 18 8 x 18 12.5 x 30

33 - - - - - - 10 x 25 15 x 30

47 - - - - 6.5 x 18 8 x 18 10 x 25 18 x 30

------10 x 30-

68 - - - - - - 12.5 x 30 18 x 38

100 - - - 6.5 x 18 8 x 18 10 x 25 12.5 x 30 21 x 38

-----10 x 30--

150 - - - - 10 x 18 12.5 x 30 15 x 30 -

220 - 6.5 x 18 8 x 18 10 x 18 10 x 25 12.5 x 30 18 x 30 -

----10 x 30---

330 - 8 x 18 10 x 18 10 x 25 12.5 x 30 15 x 30 18 x 38 -

470 - 8 x 18 10 x 18 10 x 25 12.5 x 30 18 x 30 21 x 38 -

- - - 10 x 30 - - - -

680 - - 10 x 30 12.5 x 30 15 x 30 18 x 38 - -

1000 10 x 18 10 x 25 12.5 x 30 12.5 x 30 18 x 30 21 x 38 - -

-10 x 30------

1500 10 x 25 12.5 x 30 12.5 x 30 15 x 30 18 x 38 - - -

2200 - 12.5 x 30 15 x 30 18 x 30 21 x 38 - - -

3300 - 15 x 30 18 x 30 18 x 38 - - - -

4700 - 18 x 30 18 x 38 21 x 38 - - - -

6800 - 18 x 38 21 x 38 - - - - -

10 000 - 21 x 38 - - - - - -

73 ± 1.6

Ø D

Ø d

Form BR: Taped on reel

Case Ø D x L = 6.5 mm x 18 mm to 15 mm x 30 mm

Form BA: Taped in box (ammopack)

Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm

Form AA: Axial in box

Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm

33 ± 1

Ø D

Ø d

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 3Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Table 1

Note

• Detailed tape dimensions see section “Packaging”.

Fig. 4 - Mounting hole diagram and outline; Form MR: With mounting ring and pins

Note

• Unless otherwise specified, all electrical values in Table 2 apply

at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.

ORDERING EXAMPLE

Electrolytic capacitor 118 series

1000 μF / 10 V; ± 20 %

Nominal case size: Ø 10 mm x 30 mm; Form BR

Ordering code: MAL211824102E3

Former 12NC: 2222 118 24102

AXIAL; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES

NOMINAL

CASE SIZE

Ø D x L

CASE

CODE

AXIAL: FORM AA, BA AND BR MASS

(g)

PACKAGING QUANTITIES

Ø d I Ø Dmax. Lmax. Fmin. FORM

FORM

6.5 x 18 4 0.8 - 6.9 18.5 25 1.3 - 1000 1000

8 x 18 5 0.8 - 8.5 18.5 25 1.7 - 500 500

10 x 18 6 0.8 - 10.5 18.5 25 2.5 - 500 500

10 x 25 7 0.8 - 10.5 25.5 30 3.3 - 500 500

10 x 30 00 0.8 55 ± 1 10.5 30.5 35 4.8 340 - 500

12.5 x 30 01 0.8 55 ± 1 13.0 30.5 35 7.4 260 - 400

15 x 30 02 0.8 55 ± 1 15.5 30.5 35 11.7 200 - 250

18 x 30 03 0.8 55 ± 1 18.5 30.5 35 12.9 120 - -

18 x 38 04 0.8 34 ± 1 18.5 39.5 44 19 125 - -

21 x 38 05 0.8 34 ± 1 21.5 39.5 44 24 100 - -

MOUNTING RING; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES

NOMINAL

CASE SIZE

Ø D x L

CASE

CODE

MOUNTING RING: FORM MR MASS

(g)

PACKAGING

QUANTITIES

Ø d1 Ø d2 Ø Dmax. Ø D2max. D3 Lmax.

15 x 30 02 0.8 1.0 + 0.4 15.5 17.5 16.5 ± 0.2 33  8.6 200

18 x 30 03 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 33  11.5 240

18 x 38 04 0.8 1.0 + 0.4 18.5 19.5 18.5 ± 0.2 42  14.0 100

21 x 38 05 0.8 1.0 + 0.4 21.5 22.5 21.5 ± 0.2 42  19.0 100

120 °C

(3 x)

1.3 + 0.1

0(3 x)

1.05 + 0.03

- 0.1

3.6 + 0.2

- 0.2

(3 x)

1.3 + 0

(3 x)

Mounting holes

90° ± 2°

(3 x)

- 0.05

Case Ø D x L = 15 mm x 30 mm to 21 mm x 38 mm

Especially for applications with severe shocks and vibrations

Ø d1

Ø D2

1+ 1.0

- 0.5

ELECTRICAL DATA

SYMBOL DESCRIPTION

CRRated capacitance at 100 Hz, tolerance ± 20 %

IRRated RMS ripple current at 100 Hz, 125 °C

IL1 Max. leakage current after 1 min at UR

IL5 Max. leakage current after 5 min at UR

tan Max. dissipation factor at 100 Hz

ESR Equivalent series resistance at 100 Hz

(calculated from tan max. and CR)

Z Max. impedance at 10 kHz

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 4Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Table 2

ELECTRICAL DATA AND ORDERING INFORMATION

(V)

100 Hz

(μF)

NOMINAL

CASE SIZE

Ø D x L

(mm)

CASE

CODE

100 Hz

125 °C

(mA)

IL1

1 min

(μA)

IL5

5 min

(μA)

tan 

100 Hz

ESR

100 Hz

()

10 kHz

()

ORDERING CODE MAL2118.......

IN BOX

FORM AA

TAPED

ON REEL

FORM BR

TAPED

IN BOX

FORM BA

MOUNTING

RING

FORM MR

6.3 1000 10 x 18 6 251 42 17 0.50 0.790 0.80 - 23102E3 33102E3 -

1500 10 x 25 7 352 61 23 0.50 0.530 0.53 - 90502E3 90503E3 -

220 6.5 x 18 4 109 20 8.4 0.35 2.530 2.10 - 24221E3 34221E3 -

330 8 x 18 5 150 24 11 0.35 1.690 1.40 - 24331E3 34331E3 -

470 8 x 18 5 179 32 13 0.35 1.190 1.00 - 24471E3 34471E3 -

1000 10 x 25 7 343 64 24 0.35 0.560 0.55 - 90504E3 90505E3 -

1000 10 x 30 00 550 64 24 0.32 0.505 0.45 14102E3 24102E3 - -

1500 12.5 x 30 01 740 94 34 0.32 0.340 0.28 14152E3 24152E3 - -

2200 12.5 x 30 01 830 136 48 0.40 0.290 0.27 14222E3 24222E3 - -

3300 15 x 30 02 1070 202 70 0.40 0.190 0.18 14332E3 24332E3 - 44332E3

4700 18 x 30 03 1350 286 98 0.46 0.155 0.15 14472E3 - - 44472E3

6800 18 x 38 04 1730 412 140 0.53 0.100 0.10 14682E3 - - 44682E3

10 000 21 x 38 05 1860 604 200 0.53 0.084 0.10 14103E3 - - 44103E3

220 8 x 18 5 145 25 11 0.25 1.810 1.50 - 25221E3 35221E3 -

330 10 x 18 6 204 36 15 0.25 1.210 1.20 - 25331E3 35331E3 -

470 10 x 18 6 243 49 19 0.25 0.850 0.83 - 25471E3 35471E3 -

680 10 x 30 00 510 69 30 0.22 0.525 0.45 15681E3 25681E3 - -

1000 12.5 x 30 01 720 100 36 0.22 0.345 0.28 15102E3 25102E3 - -

1500 12.5 x 30 01 790 148 52 0.29 0.305 0.27 15152E3 25152E3 - -

2200 15 x 30 02 1010 215 74 0.29 0.205 0.18 15222E3 25222E3 - 45222E3

3300 18 x 30 03 1300 321 110 0.34 0.165 0.15 15332E3 - - 45332E3

4700 18 x 38 04 1670 455 150 0.34 0.105 0.10 15472E3 - - 45472E3

6800 21 x 38 05 1790 657 220 0.38 0.088 0.10 15682E3 - - 45682E3

100 6.5 x 18 4 102 20 9 0.18 2.860 2.30 - 26101E3 36101E3 -

220 10 x 18 6 196 37 15 0.18 1.300 1.25 - 26221E3 36221E3 -

330 10 x 25 7 274 54 21 0.18 0.870 0.82 - 26331E3 36331E3 -

470 10 x 25 7 327 75 28 0.18 0.610 0.57 - 90508E3 90509E3 -

470 10 x 30 00 490 75 28 0.18 0.610 0.50 16471E3 26471E3 - -

680 12.5 x 30 01 680 106 38 0.18 0.420 0.30 16681E3 26681E3 - -

1000 12.5 x 30 01 760 154 54 0.24 0.375 0.28 16102E3 26102E3 - -

1500 15 x 30 02 980 229 79 0.25 0.263 0.22 16152E3 26152E3 - 46152E3

2200 18 x 30 03 1240 334 110 0.26 0.185 0.17 16222E3 - - 46222E3

3300 18 x 38 04 1610 499 170 0.26 0.120 0.11 16332E3 - - 46332E3

4700 21 x 38 05 1710 709 240 0.28 0.095 0.10 16472E3 - - 46472E3

47 6.5 x 18 4 89.8 20 7.8 0.11 3.720 2.80 - 27479E3 37479E3 -

100 8 x 18 5 147 28 12 0.11 1.750 1.30 - 27101E3 37101E3 -

150 10 x 18 6 207 40 16 0.11 1.170 1.00 - 27151E3 37151E3 -

220 10 x 25 7 287 57 22 0.11 0.800 0.68 - 90511E3 90512E3 -

220 10 x 30 00 390 57 22 0.10 0.700 0.55 17221E3 27221E3 - -

330 12.5 x 30 01 570 83 30 0.10 0.430 0.33 17331E3 27331E3 - -

470 12.5 x 30 01 620 117 42 0.11 0.380 0.30 17471E3 27471E3 - -

680 15 x 30 02 810 167 58 0.11 0.255 0.23 17681E3 27681E3 - 47681E3

1000 18 x 30 03 1070 244 84 0.13 0.205 0.18 17102E3 - - 47102E3

1500 18 x 38 04 1390 364 120 0.13 0.130 0.11 17152E3 - - 47152E3

2200 21 x 38 05 1540 532 180 0.15 0.105 0.10 17222E3 - - 47222E3

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 5Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

4.7 6.5 x 18 4 35.6 20 4.6 0.07 24.0 8.90 - 28478E3 38478E3 -

10 6.5 x 18 4 51.9 20 5.3 0.07 11.0 5.60 - 28109E3 38109E3 -

22 6.5 x 18 4 77.0 20 6.8 0.07 5.10 3.20 - 28229E3 38229E3 -

47 8 x 18 5 126 22 9.9 0.07 2.40 1.50 - 28479E3 38479E3 -

100 10 x 25 7 243 42 17 0.07 1.10 0.70 - 90513E3 90514E3 -

100 10 x 30 00 340 42 17 0.07 1.91 1.62 18101E3 28101E3 - -

150 12.5 x 30 01 490 61 23 0.07 1.00 0.79 18151E3 28151E3 - -

220 12.5 x 30 01 550 87 32 0.08 0.94 0.82 18221E3 28221E3 - -

330 15 x 30 02 730 129 46 0.09 0.63 0.56 18331E3 28331E3 - 48331E3

470 18 x 30 03 970 182 63 0.09 0.44 0.39 18471E3 - - 48471E3

680 18 x 38 04 1230 261 90 0.09 0.30 0.26 18681E3 - - 48681E3

1000 21 x 38 05 1400 383 130 0.10 0.16 0.20 18102E3 - - 48102E3

100

4.7 6.5 x 18 4 36 20 4.9 0.07 24.0 19.0 - 29478E3 39478E3 -

10 6.5 x 18 4 52 20 6.0 0.07 11.0 9.00 - 29109E3 39109E3 -

22 8 x 18 5 91 20 8.4 0.07 5.10 4.00 - 29229E3 39229E3 -

33 10 x 25 7 140 24 11 0.07 3.40 2.70 - 29339E3 39339E3 -

47 10 x 25 7 170 33 13 0.07 2.60 2.00 - 90535E3 90536E3 -

47 10 x 30 00 240 33 13 0.08 2.60 2.00 19479E3 29479E3 - -

68 12.5 x 30 01 320 45 18 0.08 1.80 1.20 19689E3 29689E3 - -

100 12.5 x 30 01 380 64 24 0.09 1.40 1.15 19101E3 29101E3 - -

150 15 x 30 02 500 94 34 0.10 0.94 0.78 19151E3 29151E3 - 49151E3

220 18 x 30 03 690 136 48 0.10 0.66 0.55 19221E3 - - 49221E3

330 18 x 38 04 890 202 70 0.10 0.45 0.37 19331E3 - - 49331E3

470 21 x 38 05 1050 286 98 0.10 0.33 0.28 19471E3 - - 49471E3

200

15 10 x 30 00 150 22 10 0.046 4.76 3.75 92159E3 90012E3 - -

22 12.5 x 30 01 210 31 13 0.046 3.17 2.22 92229E3 90013E3 - -

33 15 x 30 02 290 44 17 0.046 2.11 1.11 92339E3 90014E3 - 90002E3

47 18 x 30 03 390 61 23 0.046 1.48 0.60 92479E3 - - 90003E3

68 18 x 38 04 500 86 31 0.046 1.02 0.42 92689E3 - - 90004E3

100 21 x 38 05 610 124 44 0.046 0.96 0.39 92101E3 - - 90005E3

ELECTRICAL DATA AND ORDERING INFORMATION

(V)

100 Hz

(μF)

NOMINAL

CASE SIZE

Ø D x L

(mm)

CASE

CODE

100 Hz

125 °C

(mA)

IL1

1 min

(μA)

IL5

5 min

(μA)

tan 

100 Hz

ESR

100 Hz

()

10 kHz

()

ORDERING CODE MAL2118.......

IN BOX

FORM AA

TAPED

ON REEL

FORM BR

TAPED

IN BOX

FORM BA

MOUNTING

RING

FORM MR

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 6Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Table 3

Note

• For applications at ambient temperatures of  85 °C, the rated voltage (UR) may be raised to UR2.

CAPACITANCE

Fig. 5 - Typical multiplier of capacitance

as a function of ambient temperature

Fig. 6 - Typical multiplier of capacitance

as a function of ambient temperature

ADDITIONAL ELECTRICAL DATA

PARAMETER CONDITIONS VALUE

AXIAL MOUNTING RING

Voltage

Surge voltage Us  1.15 x UR

Reverse voltage Urev  1 V

Current

Leakage current After 1 min at URIL1  0.006 CR x UR + 4 μA or 20 μA

(whichever is greater)

After 5 min at URIL5  0.002 CR x UR + 4 μA

Inductance

Equivalent series inductance (ESL)

Case Ø D x L mm:

6.5 x 18 Typ. 15 nH -

8 x 18 Typ. 35 nH -

10 x 18 Typ. 69 nH -

10 x 25 Typ. 38 nH -

10 x 30 Typ. 38 nH -

12.5 x 30 Typ. 46 nH -

15 x 30 Typ. 48 nH Typ. 39 nH

18 x 30 Typ. 50 nH Typ. 39 nH

18 x 38 Typ. 54 nH Typ. 39 nH

21 x 38 Typ. 59 nH Typ. 39 nH

UPRATING VALUES AT REDUCED AMBIENT TEMPERATURE

SYMBOL CONDITIONS VALUES UNIT

URTamb > 85 °C to 125 °C 6.3 10 16 25 40 63 100 200 V

UR2 Tamb  85 °C 10 16 25 40 63 100 125 250 V

Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm

C0 = Capacitance at 20 °C, 100 Hz

Tamb (°C)

-50 0 50 100

ESR0

ESR

10-1

Curve 1: 63 V

Curve 2: 6.3 V

1.2

1.1

1.0

0.9

0.8

0.7

0.6

-60 -40 -20 0 20 40 60 80 100 120 140 160

Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm

C0 = Capacitance at 20 °C, 100 Hz

Tamb (°C)

Curve 1: 100 V; 200 V

Curve 2: 40 V; 63 V

Curve 3: 16 V; 25 V

Curve 4: 6.3 V; 10 V

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 7Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 7 - Typical multiplier of capacitance

as a function of frequency

Fig. 8 - Typical multiplier of capacitance

as a function of frequency

EQUIVALENT SERIES RESISTANCE (ESR)

Fig. 9 - Typical multiplier of ESR

as a function of ambient temperature

Fig. 10 - Typical multiplier of ESR

as a function of ambient temperature

Fig. 11 - Typical multiplier of ESR

as a function of frequency

Fig. 12 - Typical multiplier of ESR

as a function of frequency

Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm

C0 = Capacitance at 20 °C, 100 Hz

105

104

103

102

10 f (Hz)

0.2

0.4

0.6

0.8

1.0

1.2

Curve 1: 63 V to 200 V (< 15 µF)

Curve 2: 63 V; 100 V (< 15 µF)

Curve 3: 40 V

Curve 4: 25 V

Curve 5: 16 V

Curve 6: 10 V

Curve 7: 6.3 V

Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm

C0 = Capacitance at 20 °C, 100 Hz

0.5

104

103

102

10 f (Hz)

0.6

0.7

0.8

0.9

1.0

1.1

Curve 1: 200 V

Curve 2: 100 V

Curve 3: 63 V

Curve 4: 40 V

Curve 5: 25 V

Curve 6: 16 V

Curve 7: 10 V

Curve 8: 6.3 V

Tamb (°C)

102

ESR0

ESR

10-1

015050 100-50-100

Curve 1: 100 V; 200 V

Curve 2: 25 V; 40 V; 63 V

Curve 3: 6.3 V; 10 V; 16 V

Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm

ESR0 = Typical at 20 °C, 100 Hz

Tamb (°C)

102

ESR0

ESR

10-1

015050 100-50-100

3Curve 1: 6.3 V to 10 V; 16 V

Curve 2: 25 V; 40 V; 63 V

Curve 3: 100 V; 200 V

Case Ø D x L = 18 mm x 30 mm to 21 mm x 38 mm

ESR0 = Typical at 20 °C, 100 Hz

Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm

ESR0 = Typical at 20 °C, 100 Hz

105

104

103

102

10 f (Hz)

0.4

0.8

1.2

1.6

2.0

ESR0

ESR

Curve 1: 63 V to 100 V (< 15 µF)

Curve 2: 40 V

Curve 3: 25 V

Curve 4: 6.3 V; 10 V; 16 V

Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm

ESR0 = Typical at 20 °C, 100 Hz

105

104

103

102

10 f (Hz)

0.4

0.8

1.2

1.6

ESR0

ESR

Curve 1: 200 V

Curve 2: 100 V

Curve 3: 40 V; 63 V

Curve 4: 16 V; 25 V

Curve 5: 6.3 V; 10 V

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 8Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IMPEDANCE (Z)

Fig. 13 - Typical impedance as a function of frequency Fig. 14 - Typical impedance as a function of frequency

Fig. 15 - Typical impedance as a function of frequency Fig. 16 - Typical impedance as a function of frequency

Fig. 17 - Typical impedance as a function of frequency Fig. 18 - Typical impedance as a function of frequency

Case Ø D x L = 8 mm x 18 mm Tamb (°C)

106

105

104

103

102

103

102

10-1

f (Hz)

(Ω)

Curve 1: 47 V

Curve 2: 100 V

Curve 3: 220 V

Curve 4: 470 V

Case Ø D x L = 10 mm x 25 mm Tamb (°C)

106

105

104

103

102

103

102

10-1

f (Hz)

(Ω)

Curve 1: 100 V

Curve 2: 220 V

Curve 3: 470 V

Curve 4: 1000 V

Case Ø D x L = 18 mm x 30 mm Tamb (40 °C)

103

102

10-1

(Ω)

106

105

104

103

102

10 107

f (Hz)

Curve 1: 22 µF, 200 V

Curve 2: 68 µF, 100 V

Curve 3: 150 µF, 63 V

Curve 4: 220 µF, 63 V

Curve 5: 330 µF, 40 V

Curve 6: 470 µF, 40 V

Curve 7: 680 µF, 25 V

Curve 8: 1000 µF, 25 V

and 1000 µF, 16 V

Curve 9: 1500 µF, 16 V and 1500 µF, 10 V

Curve 10: 1500 µF, 10 V and 2200 µF, 6.3 V

Curve 11: 3300 µF, 6.3 V

Case Ø D x L = 12.5 mm x 30 mm Tamb (20 °C)

103

102

10-1

(Ω)

106

105

104

103

102

10 107

f (Hz)

Curve 1: 22 µF, 200 V

Curve 2: 68 µF, 100 V

Curve 3: 150 µF, 63 V

Curve 4: 220 µF, 63 V

Curve 5: 330 µF, 40 V

Curve 6: 470 µF, 40 V

Curve 7: 680 µF, 25 V

Curve 8: 1000 µF, 25 V

Curve 9: 1500 µF, 16 V

Curve 10: 1500 µF, 10 V

and 2200 µF, 6.3 V

Curve 11: 3300 µF, 6.3 V

Case Ø D x L = 18 mm x 30 mm Tamb (40 °C)

103

102

10-1

(Ω)

106

105

104

103

102

10 107

f (Hz)

Curve 1: 47 µF, 200 V

Curve 2: 220 µF, 100 V

Curve 3: 470 µF, 63 V

Curve 4: 1000 µF, 40 V

Curve 5: 2200 µF, 25 V

Curve 6: 3300 µF, 18 V

Curve 7: 4700 µF, 10 V

Curve 8: 6800 µF, 6.3 V

Case Ø D x L = 18 mm x 30 mm Tamb (20 °C)

106

105

104

103

102

10 107

f (Hz)

102

10-2

10-1

( )

Curve 1: 47 µF, 200 V

Curve 2: 220 µF, 100 V

Curve 3: 470 µF, 63 V

Curve 4: 1000 µF, 40 V

Curve 5: 2200 µF, 25 V

Curve 6: 3300 µF, 18 V

Curve 7: 4700 µF, 10 V

Curve 8: 6800 µF, 6.3 V

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 9Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RIPPLE CURRENT AND USEFUL LIFE

Table 4

Note

• Multiplier of useful life code: MBC242

Fig. 19 - Multiplier of useful life as a function of ambient temperature and ripple current load

ENDURANCE TEST DURATION AND USEFUL LIFE

NOMINAL CASE SIZE

Ø D x L

(mm)

ENDURANCE

AT 125 °C

(h)

USEFUL LIFE

AT 125 °C

(h)

6.5 x 18 2000 4000

8 x 18 2000 4000

10 x 18 2000 4000

10 x 25 2000 4000

10 x 30 3000 8000

12.5 x 30 3000 8000

15 x 30 3000 8000

18 x 30 3000 8000

18 x 38 3000 8000

21 x 38 3000 8000

3.8

3.7

3.6

3.5

3.4

3.3

3.2

3.0

2.8

2.6

2.4

2.2

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.5

0.0

3.1

40 50 60 70 80 90 100 110

Tamb (°C)

120 130

3.9

4.0

4.1

4.2

4.3

Lifetime multiplier

6.0

4.0

2.0

1.5

1.0

3.0

400

100

8.0

200

MBC242

IA = Actual ripple current at 100 Hz

IR = Rated ripple current at 100 Hz, 125 °C

(1) Useful life at 125 °C and IR applied:

Case Ø D x L = 6.5 mm x 18 mm to

10 mm x 25 mm: 4000 h

Case Ø D x L = 10 mm x 30 mm to

21 mm x 38 mm: 8000 h

(1)

118 AHT

www.vishay.com Vishay BCcomponents

Revision: 20-Apr-17 10 Document Number: 28334

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Table 5

Table 6



Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the

lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.

MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY

(V)

FREQUENCY (Hz)

50 100 300 1000 3000  10 000

IR MULTIPLIER

6.3 0.95 1.00 1.07 1.12 1.15 1.20

10 0.95 1.00 1.07 1.12 1.15 1.20

16 0.95 1.00 1.07 1.12 1.15 1.20

25 0.95 1.00 1.07 1.12 1.15 1.20

40 0.90 1.00 1.12 1.20 1.25 1.30

63 0.90 1.00 1.12 1.20 1.25 1.30

100 0.85 1.00 1.20 1.30 1.35 1.40

200 0.85 1.00 1.20 1.30 1.35 1.40

TEST PROCEDURES AND REQUIREMENTS

TEST PROCEDURE

(quick reference) REQUIREMENTS

NAME OF TEST REFERENCE

Endurance

IEC 60384-4 /

EN130300

subclause 4.13

Tamb = 125 °C; UR applied;

Case sizes:

6.5 mm x 18 mm to 10 mm x 25 mm: 2000 h;

10 mm x 30 mm to 21 mm x 38 mm: 3000 h

UR  6.3 V; C/C: +15 % / -30 %

UR > 6.3 V; C/C: ± 15 %

tan   1.3 x spec. limit

Z  2 x spec. limit

IL5  spec. limit

Useful life CECC 30301

subclause 1.8.1

Tamb = 125 °C; UR and IR applied;

Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm:

4000 h

Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm:

8000 h

UR  6.3 V; C/C: +45 % / -50 %

UR > 6.3 V; C/C: ± 45 %

tan   3 x spec. limit

Z  3 x spec. limit

IL5  spec. limit

no short or open circuit

total failure percentage: 1 %

(200 V  3 %)

Shelf life

(storage at high

temperature)

IEC 60384-4 /

EN130300

subclause 4.17

Tamb = 125 °C; no voltage applied;

UR = 6.3 V to 63 V: 500 h;

UR = 100 V and 200 V: 100 h

After test: UR to be applied for 30 min,

24 h to 48 h before measurement

C/C, tan , Z: 

for requirements

see “Endurance test” above

IL5  2 x spec. limit

Reverse voltage

IEC 60384-4 /

EN130300

subclause 4.15

Tamb = 125 °C:

125 h at U = -1 V 

followed by 125 h at UR

C/C: ± 20 %

tan   spec. limit

IL5  spec. limit

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.