161
10-2012, Rev. 1012
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
n Sockets for 2 - 6 pole relays
n Solder, PCB or screw terminal sockets
n Choice of grounding provision on sockets
n Hold down springs
n Plates and brackets permit various mounting options
Approvals
UL E59244, CSA LR15734
Technical data of approved types on request
Technical Data
Socket contact material
Spring brass, tin plated
Socket body material
2 and 4 pole models
Polyester
6 and 8 pole models
Phenolic
Maximum current 10A
Voltage drop 30mV max. at 10A
Dielectric strength 1,000Vrms
Insulation resistance 109 megΩ
Product
Code
Poles Terminal type Grounding
provision
Part
number
27E125 2 solder terminals strip 1393143-8
27E126 4 1393143-9
27E127 6 1-1393143-0
27E162 2 none 1-1393143-6
27E163 4 1-1393143-7
27E164 6 1-1393143-8
27E128 2 PCB terminals,.180” strip 1-1393143-1
27E129 4 (4.57mm) long, 1-1393143-2
27E130 6 staggered layout 1-1393143-3
27E212 2 none 2-1393143-4
27E213 4 2-1393143-5
27E271 6 3-1393143-1
27E193 2 terminal 2-1393143-1
27E194 4 2-1393143-2
27E636 2 PCB terminals, 210” strip 5-1393143-0
27E637 4 (5.33mm) long, 5-1393143-1
staggered layout
27E342 2 PCB terminals,.180” none 3-1393143-6
27E629 4 (4.57mm) long, 4-1393143-8
27E630 6 in-line layout 4-1393143-9
Solder and PC terminal sockets
Rugged, molded socket body retains floating terminals of either solder or
printed circuit pin configuration. PC terminal sockets are offered with pins in
either 0.1” (2.54mm) grid or in-line arrangement.
Grounding provisions
Pre-installed on sockets
Not for use at 5A AC and above.
Grounding Strip: Mounting stud of relay contacts grounding strip. Grounding
strip is grounded with screw or rivet through round hole in socket.
Grounding Terminal (PC sockets only): Mounting stud of relay contacts ground
terminal through square hole in socket.
Caution:
Printed circuit sockets are manufactured with “floating” (loose) terminals. This
permits them to align with holes in the circuit board and with the relay termi-
nals. During the mounting and soldering of the socket, vertical float should be
eliminated and the terminals seated on the board. (This may be accomplished
by inserting a dummy relay in the socket.) Failure to eliminate float may cause
fracture of the solder joint or separation of the copper conductor from the
printed circuit board when a relay is inserted in the socket after soldering.
Strip Terminal
Ordering Code
All accessories must be ordered separately.
Signal
Signal Relays
Sockets & Accessories, R10 Relays
162
10-2012, Rev. 1012
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
2 POLE .343 (8.71)
4 POLE .562 (14.27)
6 POLE .781 (19.84)
.281 ± .015
(7.14 ± .38)
.354
(8.99)
.140
(3.56)
.656 ± .015
(16.66 ± .38)
.281
(7.14)
++ 2 HOLES
.109 DIA .
(2.77)
.500
(12.70)
.100
(2.54)
GRID
.500
(12.70)
.450
(11.43)
6
POLE
2
POLE
4
POLE
.150
(3.81)
.100
(2.54)
+ .004
- .000
+ .10
- .00
( )
.056
1.42
HOLES
HOLE FOR GROUND
TERMINAL (IF REQ’D.)
DIA.
.210
(5.33)
.320
(8.13)
.110
(2.79)
.450
(11.43)
.550
(13.97)
.420
(10.67)
.530
(13.46)
.400
(10.16)
HOLES
+ .004
- .000
+ .10
- .00
DIA.
.056
1.42
( )
.350
(8.89)
.032
(.81)
CLEARANCE
HOLE FOR
RELAY MNTG.
STUD &
GROUND
SPRING
.235
(5.97)
.330
(8.38)
.165
(4.19)
.312
(7.92)
.519
(13.18)
.725
(18.42)
2 POLE
4 POLE
6 POLE
.065
(1.65)
.210
(5.33)
.090
(2.29)
.625
(15.88)
.045 x .090
(1.14 x 2.28)
A
B
TOLERANCES
UNLESS OTHERWISE SH OW N
±.010
± .25
( )
2 POLE .978 (24.84)
4 POLE 1.184 (30.07)
6 POLE 1.390 (35.31)
.750
(19.05)
.175
(4.45)
PC Socket Dim. Dim.
Term. Length A B
.180 in .180 .115
(4.57) (2.92)
.210 in .210 .156
(5.33) (3.96)
.120 DIA.
HOLE
(3.05)
Dimensions
Solder and PC terminal sockets Sockets with staggered PC terminals
PCB layout
Sockets with inline PC terminals
Sockets with solder terminals
PCB layout (top view)
Signal
Signal Relays
Sockets & Accessories, R10 Relays (Continued)
163
10-2012, Rev. 1012
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
Dimensions
Bracket Mount socket 27E317 and 27E152
Allows solder terminal relay to mount flat on a chassis.
Track mount sockets 27E460, 27E461, 27E462
Provides front wiring, screw terminal connections for R10 family relays. No grounding
provision.
Product
Code
Poles Terminal
type
Mount
type
Grounding
provision
Part
number
27E317 2 solder bracket strip 3-1393143-4
27E152 4 1-1393143-5
27E446 2 solder flange strip 4-1393143-1
27E447 4 4-1393143-2
27E448 6 4-1393143-3
27E460 2 screw track/ none 1393837-1
27E461 4 chassis 4-1393143-4
27E462 6 4-1393143-5
.175 REF.
(4.45)
.780 MAX.
(19.81)
2 MTG. HOLES
.147 DIA.
(3.73)
.187 ± .010
(4.75 ± .25)
2 HOLES
.147 DIA.
(3.73)
.065
(1.65)
.045 x .090
(1.14 x 2.28)
SLOT IN TERMINAL S
.210
(5.33)
.320 REF.
(8.13)
AB
.687
(17.45)
.25
(6.35)
C
SUGG
CHASSIS
CUTOUT
+++
+++
+++
+++
+++
+++
+
+
9
13
11
10
8
7
5
6
15
1
2
12
21
22
20
19
17
16
14
18
4
3
+++
+++
+++
+++
+++
+
+
16
14
13
4
3
15
11
12
9
10
5
6
1
2
7
8
.187 MIN .
(4.75)
27EXXX
PC BOARD
CHASSIS
SUGGESTED STANDOFF
.375 (9.53) DIA. MIN;
.625 (15.88) DIA. MAX.
(CUSTOMER SUPPLIED)
OR INSULATOR (40G432)
40G432
INSULATOR
1.12L x .41W x .26H
(28.4 x 10.4 x 6.60)
1.375
(34.93)
.187 MIN .
(4.75)
27EXXX
PC BOARD
24A110
TRACK
24A071
MOUNTING CLIP
Suggested track mounting Suggested chassis mounting
X
.075
(1.91) .437
(11.10)
.150
(3.81)
.058
(1.47)
MATERIAL
THICKNESS
.484
(12.29)
.156
(3.96)
.210 TYP.
(5.33)
.045 x .090 TYP.
(1.14 x 2.28)
.437
(11.10)
TAPPED #6-32 THREAD
.85 MAX.
(21.6)
+
X=2 POLE .978
(24.84)
4 POLE 1.184
(30.07)
Flange mount socket 27E446, 27E447, 27E448
Solder terminal socket with tin-plated terminals and grounding strip pre-assembled on
.065” (1.65mm) steel mounting plate. Requires only one chassis cutout.
All accessories must be ordered separately.
Ordering Code
+
6
2
1
+
10
3
4
7
59
8
BA
C
1.375 ± .010
(34.93 ± .254)
.530 MAX.
(13.46)
.062 ± .0 07
(1.57 ± .178)
2.75 ± .015
(69.85 ± .381)
#6-32 SCREWS .100
(2.54)
(2) MTNG. HOLES
.187 DIA.
(4.75)
+++
+++
+++
+++
Socket Poles Dim A Dim B Dim C
27E446 2 1.437 1.822 .937
(36.50) (46.27) (23.80)
27E447 4 1.687 2.072 1.125
(42.85) (52.63) (28.58)
27E448 6 1.875 2.260 1.343
(47.63) (57.40) (34.11)
2 pole terminal wiring code
4 pole terminal wiring code 6 pole terminal wiring code
Signal
Signal Relays
Sockets & Accessories, R10 Relays (Continued)
164
10-2012, Rev. 1012
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
37D645 – Mounting Strip
Strip of .060” (1.52mm) aluminum contains ten pre-punched, breakaway mounting plates.
Each plate accomodates a 2, 4, 6 or 8 pole solder terminal R10 relay or socket to facilitate
chassis- or rack mounting.
“A ” = .109 DIA.
(2.77)
.180
(4.57)
.090
(2.29)
.16
(4.1)
.32
(8.1)
“A ” “A ”
++ ++
1.135
(28.83)
2.50
(63.5)
2.000
(50.80)
.535
(13.59)
.25
(6.4)
1.205
(30.61)
.13
(3.3)
1.205
(30.61) .090 R.
(2.29)
Hold down spring Hold down strap
(PC sockets only)
Product
Code
Description Part
number
20C249 Hold down spring for 2 pole R10 relays 3-1393159-5
20C250 Hold down spring for 4 pole R10 relays 3-1393159-6
20C251 Hold down spring for 6 pole R10 relays 3-1393159-7
20C266 Hold down spring for 8 pole R10 relays 4-1393159-1
20C259 Hold down strap for R10 relays in PC sockets 4-1393159-0
20C300 Hold down spring for 2 pole R10S relays 4-1393159-4
20C301 Hold down spring for 4 pole R10S relays 4-1393159-5
37D645 Mounting strip - accepts 10 relays or sockets 7-1393143-3
24A110 Mounting track 1419111-6
24A071 Steel mounting clip with #6-32 screw -
use with 27E46_ sockets on 24A110 track
1419111-5
40G432 Plastic insulator - use with use with 27E46_
sockets on chassis or with 24A071 clip on
24A110 track
9-1393159-5
1.375 ± .010
(34.93 ± .254)
.405 ± .0 07
(10.29 ± .178)
6.00
(152.4)
3.00
(76.2)
.750
(19.05)
.187
(4.75)
36.00 ± .060
(914.4 ± 1.52)
24A110 – Mounting track
Mounting track is designed to accept snap-mount sockets, as well as other P&B screw
terminal sockets. Track is made of lightweight, sturdy extruded aluminum and is shipped in
three-foot (914cm) lengths with mounting holes on six-inch (152mm) centers. Track can be
cut to shorter lengths or used end-to-end.
24A110
40G432
24A071
All accessories must be ordered separately.
Ordering Code
Dimensions
Signal
Signal Relays
Sockets & Accessories, R10 Relays (Continued)
