ECO-PACTM 2 CoolMOS Power MOSFET in ECO-PAC 2 ID25 VDSS RDSon PSHM 40/06 N-Channel Enhancement Mode Low RDSon, High VDSS MOSFET Package with Electrically Isolated Base = 38 A = 600 V = 70 m 1) L4 L6 L9 P18 R18 K12 A1 E10 F10 NTC Preliminary Data Sheet K13 MOSFET Symbol VDSS VGS ID25 ID90 dv/dt EAS EAR Symbol RDSon VGSth IDSS IGSS Qg Qgs Qgd td(on) tr td(off) tf VF RthJC Conditions TVJ = 25C to 150C TC = 25C TC = 90C VDS < VDSS; IF 50A;diF/dt 200A/s TVJ = 150C ID = 10 A; L = 36 mH; TC = 25C ID = 20 A; L = 5 H; TC = 25C Features Maximum Ratings 600 V 20 V 38 A 25 A 6 V/ns 1.8 1 * ECO-PAC 2 with DCB Base - Electrical isolation towards the heatsink - Low coupling capacitance to the heatsink for reduced EMI - High power dissipation - High temperature cycling capability of chip on DCB - solderable pins for DCB mounting * fast CoolMOS power MOSFET - 2nd generation - High blocking capability - Low on resistance - Avalanche rated for unclamped inductive switching (UIS) - Low thermal resistance due to reduced chip thickness * * Enhanced total power density UL registered, E 148688 J mJ Conditions Characteristic Values (TVJ = 25C, unless otherwise specified) min. typ. max. VGS = 10 V; ID = ID90 70 m VDS = 20 V; ID = 3 mA; 3.5 5.5 V VDS = VDSS; VGS = 0 V; TVJ = 25C 25 A TVJ = 125C 60 A VGS = 20 V; VDS = 0 V 100 nA 220 nC 55 nC VGS= 10 V; VDS = 350 V; ID = 50 A 125 nC 30 ns 95 ns VGS= 10 V; VDS = 380 V; 100 ns ID = 25 A; RG = 1.8 10 ns (reverse conduction) IF = 20 A; VGS = 0 V 0.9 1.1 V per MOSFET 0.45 K/W Applications * * * * * Switched mode power supplies (SMPS) Uninterruptible power supplies (UPS) Power factor correction (PFC) Welding Inductive heating Advantages * * * Data according to IEC 60747 refer to a single diode or transistor unless otherwise stated * * Caution: These Devices are sensitive to electrostatic discharge. Users should observe proper ESD handling precautions. 1) Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight CoolMOS is a trademark of Infineon Technologies AG. 2003 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ ECO-PACTM 2 Temperature Sensor NTC Symbol Conditions R25 B25/50 T = 25C Characteristic Values min. typ. max. 4.75 5.0 5.25 k 3375 K Dimensions in mm (1 mm = 0.0394") Module Symbol TVJ Tstg VISOL Md Conditions a Max. allowable acceleration Symbol Conditions dS dA Weight Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) IISOL 1 mA; 50/60 Hz; t = 1 s Mounting torque (M4) Maximum Ratings -40...+150 -40...+125 3600 1.5 - 2.0 14 - 18 50 C C V~ Nm lb.in. m/s 2 Characteristic Values min. typ. max. 11.2 mm 11.2 mm 24 g 2003 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/