CLD-D118 REV 7 PRODUCT FAMILY DATA SHEET Cree(R) XLamp(R) CXB1512 LED PRODUCT DESCRIPTION XLamp CXA2 LED Arrays lead the industry in efficacy and (R) reliability for ceramicbased COB LEDs. Cree CXA2 LEDs easily deliver TM-21 lifetimes well beyond L90 60,000 hours under a wide range of operating conditions. CXA2 LED Arrays share the same physical design as XLamp CXA and CMA LED families, allowing lighting manufacturers to leverage the existing optical, mechanical and electrical design elements to accelerate time to market without additional cost. CXA2 Standard Density LED Arrays are now available in two different versions: Standard and eToneTM LEDs. The eTone version delivers beautiful 90 CRI light quality at the same efficacy as today's standard 80 CRI LEDs. FEATURES * 9mm optical source * Mechanical and optical design consistent with other CXA15 and CXB15 LEDs * Cree EasyWhite(R) 2-, 3 and 5-step binning * Premium Color 2- and 3-step binning * Standard & Premium Color LEDs available in 70, 80, 90 and 95 CRI minimum options * eTone LEDs available in 90 and 95 CRI minimum options * Forward voltage options: 18V class & 36V class * 85C binning and characterization * Extremely uniform color over viewing angle * Top-side solder connections * Thermocouple attach point * NEMA SSL-3 2011 standard flux bins * RoHS and REACh compliant WWW.CREE.COM/XLAMP * UL(R) recognized component (E349212) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLAMP (R) CXB1512 LED TABLE OF CONTENTS Table of Contents.................................................................................................................................................................................................... 2 Characteristics........................................................................................................................................................................................................ 3 Operating Limits...................................................................................................................................................................................................... 4 Flux Characteristics, Order Codes & Bins - Standard LEDs - 18V........................................................................................................................ 6 Flux Characteristics, Order Codes & Bins - Standard LEDs, Premium Color - 18V............................................................................................. 9 Flux Characteristics, Order Codes and Bins - eToneTM LEDs - 18V.................................................................................................................... 10 Flux Characteristics, Order Codes & Bins - Standard LEDs - 36V...................................................................................................................... 11 Flux Characteristics, Order Codes & Bins - Standard LEDs, Premium Color - 36V........................................................................................... 14 Flux Characteristics, Order Codes and Bins - eToneTM LEDs - 36V.................................................................................................................... 15 Relative Spectral Power Distribution - Standard LEDs........................................................................................................................................ 16 Relative Spectral Power Distribution - Standard LEDs, Premium Color............................................................................................................. 17 Relative Spectral Power Distribution - eToneTM LEDs.......................................................................................................................................... 18 Electrical Characteristics...................................................................................................................................................................................... 19 Relative Luminous Flux......................................................................................................................................................................................... 20 Typical Spatial Distribution................................................................................................................................................................................... 22 Performance Groups - Brightness....................................................................................................................................................................... 22 EasyWhite(R) Performance Groups - Chromaticity................................................................................................................................................ 23 Premium Color Performance Groups - Chromaticity.......................................................................................................................................... 24 Cree EasyWhite(R) Bins Plotted on the 1931 CIE Color Space............................................................................................................................. 25 Cree Premium Color Bins Plotted on the 1931 CIE Color Space....................................................................................................................... 26 Bin and Order Code Formats................................................................................................................................................................................ 28 Mechanical Dimensions....................................................................................................................................................................................... 29 Thermal Design..................................................................................................................................................................................................... 30 Notes..................................................................................................................................................................................................................... 32 Packaging.............................................................................................................................................................................................................. 33 Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLAMP (R) CXB1512 LED CHARACTERISTICS Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Unit degrees Minimum Typical Maximum 115 V 8000 DC forward current (18V) - Standard mA 1200* DC forward current (18V) - eTone mA 1200* DC forward current (36V) - Standard mA 600* DC forward current (36V) - eTone mA 600* Reverse current (18V, 36V) mA 0.1 Forward voltage (18V, @ 700mA, 85C) V 17.2 19 Forward voltage (36V, @ 350mA, 85C) V 34.3 38 * Refer to the Operating Limits section. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLAMP (R) CXB1512 LED OPERATING LIMITS The maximum current rating of the CXB1512 depends on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page 29 for the location of the Tc measurement point. Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree recommends a maximum LES temperature of 135C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 30 for more CXB1512 - 18 V Standard information on LES temperature measurement. 1400 90 C, 1200 mA 1200 Standard LEDs If (mA) 1000 800 18 V 600 125 C, 498 mA 400 200 0 CXB1512 - 018 V eTone 25 50 75 100 125 150 Case Temperature (C) 1400 85 C, 1200 mA 1200 eTone LEDs If (mA) 1000 800 18 V 600 400 200 0 0 25 50 75 100 125 150 Case Temperature (C) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLAMP (R) CXB1512 LED OPERATING LIMITS - CONTINUED CXB1512 - 36 V Standard 700 90 C, 600 mA 600 Standard LEDs If (mA) 500 400 36 V 300 125 C, 249 mA 200 100 0 0 25 50 75 100 125 150 Case Temperature (C) CXB1512 - 36 V eTone 700 85 C, 600 mA 600 eTone LEDs If (mA) 500 400 36 V 300 200 100 0 0 25 50 75 100 125 150 Case Temperature (C) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 18V (IF = 700mA, TJ=85C) The following table provides order codes for XLamp CXB1512 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 28). Nominal CCT CRI* Min 70 Minimum Luminous Flux Typ --- 6500K 80 70 70 --- 90 Order Code Group Order Code --- 5-Step Group Order Code CXB1512-0000000F0BN465E N4 1710 1871 P2 1830 2002 P4 1965 2150 CXB1512-0000000F0BP465E N2 1590 1739 CXB1512-0000000F0HN265E N4 1710 1871 CXB1512-0000000F0HN465E N4 1710 1871 CXB1512-0000000F0BN457E P2 1830 2002 P4 1965 2150 N2 1590 1739 65E 65E 57E CXB1512-0000000F0BP265E CXB1512-0000000F0BP257E CXB1512-0000000F0BP457E --- 5000K 80 Flux (lm) Flux (lm) Group @ 85C @ 25C** 3-Step --- 5700K 80 Group 2-Step 57E CXB1512-0000000F0HN257E N4 1710 1871 CXB1512-0000000F0HN457E N4 1710 1871 CXB1512-0000000F0BN450E P2 1830 2002 P4 1965 2150 N2 1590 1739 N4 1710 1871 M4 1485 1625 --- 50E CXB1512-0000000F0BP450E 50G 92 50G N2 1590 1739 CXB1512-0000000F0BP250E CXB1512-0000000F0HN250G CXB1512-0000000F0HN450G 50E CXB1512-0000000F0HN250E CXB1512-0000000F0HN450E CXB1512-0000000F0UM450G CXB1512-0000000F0UN250G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25C are calculated and for reference only. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 18V (IF = 700mA, TJ=85C) - CONTINUED Nominal CCT CRI* Min 70 4000K 80 90 80 Minimum Luminous Flux Typ --- --- 92 --- Group 2-Step Flux (lm) Flux (lm) Group @ 85C @ 25C** 80 92 --- 92 Order Code 5-Step Group Order Code CXB1512-0000000F0BN440E 1710 1871 P2 1830 2002 P4 1965 2150 N2 1590 1739 N4 1710 1871 P2 1830 2002 CXB1512-0000000F0HP240H CXB1512-0000000F0HP240G M2 1380 1510 CXB1512-0000000F0UM240H CXB1512-0000000F0UM240G M4 1485 1625 N2 1590 1739 CXB1512-0000000F0UN240H CXB1512-0000000F0UN240G N2 1590 1739 CXB1512-0000000F0HN235H CXB1512-0000000F0HN235G N4 1710 1871 P2 1830 2002 CXB1512-0000000F0HP235H CXB1512-0000000F0HP235G K4 1290 1411 CXB1512-0000000F0UK435H CXB1512-0000000F0UK435G M2 1380 1510 M4 1485 1625 CXB1512-0000000F0UM435H CXB1512-0000000F0UM435G M4 1485 1625 CXB1512-0000000F0HM430H CXB1512-0000000F0HM430G N2 1590 1739 N4 1710 1871 CXB1512-0000000F0HN430H CXB1512-0000000F0HN430G K4 1290 1411 CXB1512-0000000F0UK430H CXB1512-0000000F0UK430G M2 1380 1510 M4 1485 1625 40E CXB1512-0000000F0BP240E CXB1512-0000000F0BP440E CXB1512-0000000F0HN240H 40H 40H 35H 35H 30H 3000K 90 Group N4 3500K 90 Order Code 3-Step 30H CXB1512-0000000F0HN440H CXB1512-0000000F0UM440H CXB1512-0000000F0HN435H CXB1512-0000000F0UM235H CXB1512-0000000F0HN230H CXB1512-0000000F0UM230H CXB1512-0000000F0UM430H CXB1512-0000000F0HN240G 40G 40G 35G 35G 30G 30G CXB1512-0000000F0HN440G CXB1512-0000000F0UM440G CXB1512-0000000F0HN435G CXB1512-0000000F0UM235G CXB1512-0000000F0HN230G CXB1512-0000000F0UM230G CXB1512-0000000F0UM430G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25C are calculated and for reference only. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 18V (IF = 700mA, TJ=85C) - CONTINUED Nominal CCT CRI* Minimum Luminous Flux Min Typ 80 --- Group M4 2700K 90 2200K 80 92 --- 2-Step Flux (lm) Flux (lm) Group @ 85C @ 25C** 1485 1625 27H Order Code CXB1512-0000000F0HM427H N2 1590 1739 CXB1512-0000000F0HN227H K2 1200 1313 CXB1512-0000000F0UK227H K4 1290 1411 M2 1380 1510 M2 1380 1510 27H CXB1512-0000000F0UK427H 3-Step Group 27G Order Code 5-Step Group Order Code CXB1512-0000000F0HM427G CXB1512-0000000F0HN227G CXB1512-0000000F0UK227G 27G CXB1512-0000000F0UM227H CXB1512-0000000F0UK427G CXB1512-0000000F0UM227G 22G CXB1512-0000000F0HM222G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25C are calculated and for reference only. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS, PREMIUM COLOR - 18V (IF = 700mA, TJ=85C) Fidelity Nominal CCT CRI* Typical Luminous Flux (lm) Flux (lm) Flux (lm) Group @ 85C @ 25C** @ 85C Minimum Luminous Flux 2-Step Min Typ Group Order Code 4000K 95 98 K4 1290 1411 1407 L5A CXB1512-0000-000F0ZK4L5A 3500K 95 98 K2 1200 1313 1355 35H CXB1512-0000-000F0ZK235H 3000K 95 98 K2 1200 1313 1303 30H CXB1512-0000-000F0ZK230H 2700K 95 98 J4 1120 1225 1229 27H CXB1512-0000-000F0ZJ427H Specialty Nominal CCT 3100K CRI Min 90 80 3000K 90 95 Typical Luminous Flux (lm) Flux (lm) Flux (lm) @ 85C @ 25C** @ 85C Minimum Luminous Flux Typ Group K4 1290 1411 M2 1380 1510 M4 1485 1625 J4 1120 1225 K2 1200 1313 K4 1290 1411 J4 1120 1225 92 --- 92 98 2-Step Group Order Code 1502 1746 3-Step Group 31Q L7B Order Code Group Order Code CXB1512-0000000F0UK431Q CXB1512-0000000F0UM231Q CXB1512-0000000F0HM4L7B CXB1512-0000000F0UJ430U 1502 30Q CXB1512-0000000F0UK230Q CXB1512-0000000F0UK430Q 1303 L7C 30U CXB1512-0000000F0UK230U CXB1512-0000000F0UK430U CXB1512-0000000F0ZJ4L7C Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25C are calculated and for reference only. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES AND BINS - ETONETM LEDS - 18V (IF = 700mA, TJ = 85C) Nominal CCT 4000K 3500K 3000K 2700K CRI* 2-Step 3-Step Min. Typ Minimum Luminous Flux (lm) Typical Luminous Flux (lm) Group Order Code Group Order Code 90 92 1463 1705 40H CXB1512-0000-00PF0U0A40H 95 98 1393 1520 L5A CXB1512-0000-00PF0Z0AL5A 40G CXB1512-0000-00PF0U0A40G 90 92 1479 1676 35H CXB1512-0000-00PF0U0A35H 35G CXB1512-0000-00PF0U0A35G 95 98 1308 1477 35H CXB1512-0000-00PF0Z0A35H 90 92 1226 1659 30H CXB1512-0000-00PF0U0A30H 30G CXB1512-0000-00PF0U0A30G 95 98 1320 1433 30H CXB1512-0000-00PF0Z0A30H 90 92 1140 1592 27H CXB1512-0000-00PF0U0A27H 95 98 1243 1364 27H CXB1512-0000-00PF0Z0A27H 27G CXB1512-0000-00PF0U0A27G Min. Typ Minimum Luminous Flux (lm) Typical Luminous Flux (lm) 90 92 1213 90 92 95 98 Specialty Nominal CCT 3100K CRI 2-Step Group Group Order Code 1641 31Q CXB1512-000000PF0U0A31Q 1226 1659 30Q CXB1512-000000PF0U0A30Q 1109 1290 3000K L7C Order Code 3-Step Group Order Code 30U CXB1512-000000PF0U0A30U CXB1512-000000PF0Z0AL7C Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 36V (IF = 350mA, TJ=85C) The following table provides order codes for XLamp CXB1512 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 28). Nominal CCT CRI* Min 70 Minimum Luminous Flux Typ --- 6500K 80 70 70 --- 90 Order Code Group Order Code --- 5-Step Group Order Code CXB1512-0000000N0BN465E N4 1710 1871 P2 1830 2002 P4 1965 2150 CXB1512-0000000N0BP465E N2 1590 1739 CXB1512-0000000N0HN265E N4 1710 1871 CXB1512-0000000N0HN465E N4 1710 1871 CXB1512-0000000N0BN457E P2 1830 2002 P4 1965 2150 N2 1590 1739 65E 65E 57E CXB1512-0000000N0BP265E CXB1512-0000000N0BP257E CXB1512-0000000N0BP457E --- 5000K 80 Flux (lm) Flux (lm) Group @ 85C @ 25C** 3-Step --- 5700K 80 Group 2-Step 57E CXB1512-0000000N0HN257E N4 1710 1871 CXB1512-0000000N0HN457E N4 1710 1871 CXB1512-0000000N0BN450E P2 1830 2002 P4 1965 2150 N2 1590 1739 N4 1710 1871 M4 1485 1625 --- 50E CXB1512-0000000N0BP450E 50G 92 50G N2 1590 1739 CXB1512-0000000N0BP250E CXB1512-0000000N0HN250G CXB1512-0000000N0HN450G 50E CXB1512-0000000N0HN250E CXB1512-0000000N0HN450E CXB1512-0000000N0UM450G CXB1512-0000000N0UN250G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25C are calculated and for reference only. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 36V (IF = 350mA, TJ=85C) - CONTINUED Nominal CCT CRI* Min 70 4000K 80 90 80 Minimum Luminous Flux Typ --- --- 92 --- Group 2-Step Flux (lm) Flux (lm) Group @ 85C @ 25C** 80 92 --- 92 Order Code 5-Step Group Order Code CXB1512-0000000N0BN440E 1710 1871 P2 1830 2002 P4 1965 2150 N2 1590 1739 N4 1710 1871 P2 1830 2002 CXB1512-0000000N0HP240H CXB1512-0000000N0HP240G M2 1380 1510 CXB1512-0000000N0UM240H CXB1512-0000000N0UM240G M4 1485 1625 N2 1590 1739 CXB1512-0000000N0UN240H CXB1512-0000000N0UN240G N2 1590 1739 CXB1512-0000000N0HN235H CXB1512-0000000N0HN235G N4 1710 1871 P2 1830 2002 CXB1512-0000000N0HP235H CXB1512-0000000N0HP235G K4 1290 1411 CXB1512-0000000N0UK435H CXB1512-0000000N0UK435G M2 1380 1510 M4 1485 1625 CXB1512-0000000N0UM435H CXB1512-0000000N0UM435G M4 1485 1625 CXB1512-0000000N0HM430H CXB1512-0000000N0HM430G N2 1590 1739 N4 1710 1871 CXB1512-0000000N0HN430H CXB1512-0000000N0HN430G K4 1290 1411 CXB1512-0000000N0UK430H CXB1512-0000000N0UK430G M2 1380 1510 M4 1485 1625 40E CXB1512-0000000N0BP240E CXB1512-0000000N0BP440E CXB1512-0000000N0HN240H 40H 40H 35H 35H 30H 3000K 90 Group N4 3500K 90 Order Code 3-Step 30H CXB1512-0000000N0HN440H CXB1512-0000000N0UM440H CXB1512-0000000N0HN435H CXB1512-0000000N0UM235H CXB1512-0000000N0HN230H CXB1512-0000000N0UM230H CXB1512-0000000N0UM430H CXB1512-0000000N0HN240G 40G 40G 35G 35G 30G 30G CXB1512-0000000N0HN440G CXB1512-0000000N0UM440G CXB1512-0000000N0HN435G CXB1512-0000000N0UM235G CXB1512-0000000N0HN230G CXB1512-0000000N0UM230G CXB1512-0000000N0UM430G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25C are calculated and for reference only. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 36V (IF = 350mA, TJ=85C) - CONTINUED Nominal CCT CRI* Minimum Luminous Flux Min Typ 80 --- Group M4 2700K 90 2200K 80 92 --- 2-Step Flux (lm) Flux (lm) Group @ 85C @ 25C** 1485 1625 27H Order Code CXB1512-0000000N0HM427H N2 1590 1739 CXB1512-0000000N0HN227H K2 1200 1313 CXB1512-0000000N0UK227H K4 1290 1411 M2 1380 1510 M2 1380 1510 27H CXB1512-0000000N0UK427H 3-Step Group 27G Order Code 5-Step Group Order Code CXB1512-0000000N0HM427G CXB1512-0000000N0HN227G CXB1512-0000000N0UK227G 27G CXB1512-0000000N0UM227H CXB1512-0000000N0UK427G CXB1512-0000000N0UM227G 22G CXB1512-0000000N0HM222G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25C are calculated and for reference only. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS, PREMIUM COLOR - 36V (IF = 350mA, TJ=85C) Fidelity Nominal CCT CRI* Typical Luminous Flux (lm) Flux (lm) Flux (lm) Group @ 85C @ 25C** @ 85C Minimum Luminous Flux 2-Step Min Typ Group Order Code 4000K 95 98 K4 1290 1411 1407 L5A CXB1512-0000-000N0ZK4L5A 3500K 95 98 K2 1200 1313 1355 35H CXB1512-0000-000N0ZK235H 3000K 95 98 K2 1200 1313 1303 30H CXB1512-0000-000N0ZK230H 2700K 95 98 J4 1120 1225 1229 27H CXB1512-0000-000N0ZJ427H Specialty Nominal CCT 3100K CRI Min 90 80 3000K 90 95 Typical Luminous Flux (lm) Flux (lm) Flux (lm) @ 85C @ 25C** @ 85C Minimum Luminous Flux Typ Group K4 1290 1411 M2 1380 1510 M4 1485 1625 J4 1120 1225 K2 1200 1313 K4 1290 1411 J4 1120 1225 92 --- 92 98 2-Step Group Order Code 1502 1746 3-Step Group 31Q L7B Order Code Group Order Code CXB1512-0000000N0UK431Q CXB1512-0000000N0UM231Q CXB1512-0000000N0HM4L7B CXB1512-0000000N0UJ430U 1502 30Q CXB1512-0000000N0UK230Q CXB1512-0000000N0UK430Q 1303 L7C 30U CXB1512-0000000N0UK230U CXB1512-0000000N0UK430U CXB1512-0000000N0ZJ4L7C Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25C are calculated and for reference only. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLAMP (R) CXB1512 LED FLUX CHARACTERISTICS, ORDER CODES AND BINS - ETONETM LEDS - 36V (IF = 350mA, TJ = 85C) Nominal CCT 4000K 3500K 3000K 2700K CRI* 2-Step 3-Step Min. Typ Minimum Luminous Flux (lm) Typical Luminous Flux (lm) Group Order Code Group Order Code 90 92 1463 1705 40H CXB1512-0000-00PN0U0A40H 95 98 1393 1520 L5A CXB1512-0000-00PN0Z0AL5A 40G CXB1512-0000-00PN0U0A40G 90 92 1479 1676 35H CXB1512-0000-00PN0U0A35H 35G CXB1512-0000-00PN0U0A35G 95 98 1308 1477 35H CXB1512-0000-00PN0Z0A35H 90 92 1226 1659 30H CXB1512-0000-00PN0U0A30H 30G CXB1512-0000-00PN0U0A30G 95 98 1320 1433 30H CXB1512-0000-00PN0Z0A30H 90 92 1140 1592 27H CXB1512-0000-00PN0U0A27H 95 98 1243 1364 27H CXB1512-0000-00PN0Z0A27H 27G CXB1512-0000-00PN0U0A27G Min. Typ Minimum Luminous Flux (lm) Typical Luminous Flux (lm) 90 92 1213 90 92 95 98 Specialty Nominal CCT 3100K CRI 2-Step Group Group Order Code 1641 31Q CXB1512-000000PN0U0A31Q 1226 1659 30Q CXB1512-000000PN0U0A30Q 1109 1290 3000K L7C Order Code 3-Step Group Order Code 30U CXB1512-000000PN0U0A30U CXB1512-000000PN0Z0AL7C Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 32). * Cree XLamp CXB1512 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a 2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLAMP (R) CXB1512 LED RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS The following graphs are the result of a series of pulsed measurements at 700mA for the 18-V CXB1512 LED and 350mA for the 36-V CXB1512 LED and TJ = 85C. 100% Relative Spectral Power 90% 80% 70% 5000 K, 70 CRI 60% 4000 K, 70 CRI 50% 3000 K, 80 CRI 40% 3000 K, 90 CRI 30% 2200 K, 80 CRI 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLAMP (R) CXB1512 LED RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS, PREMIUM COLOR The following graphs are the result of a series of pulsed measurements at 700mA for the 18-V CXB1512 LED and 350mA for the 36-V CXB1512 LED and TJ = 85C. Fidelity 100% Relative Spectral Power 90% 80% 70% 60% 4000 K, Z CRI 50% 3500 K, Z CRI 3000 K, Z CRI 40% 2700 K, Z CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Spectral Power Distribution Specialty 100% Relative Spectral Power 90% 80% 70% 31Q, 3100 K, 90 CRI 60% 30Q, 3000 K, 90 CRI 50% 30U, 3000 K, 90 CRI 40% L7B, 3000 K 80 CRI 30% L7C, 3000 K, Z CRI 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLAMP (R) CXB1512 LED RELATIVE SPECTRAL POWER DISTRIBUTION - ETONETM LEDS The following graphs are the result of a series of pulsed measurements at 700mA for the 18-V CXB1512 LED and 350mA for the 36-V eTone CXB1512 LED and TJ = 85C. 100% Relative Spectral Power 90% 80% 70% 4000 K, 90 CRI 60% 3500 K,90 CRI 50% 3000 K, 90 CRI 40% 2700 K, 90 CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) eTone 100% Relative Spectral Power 90% 80% 70% 4000 K, Z CRI 60% 3500 K, Z CRI 50% 3000 K, Z CRI 40% 2700 K, Z CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLAMP (R) CXB1512 LED ELECTRICAL CHARACTERISTICS The following graphs are the result of a series of steady-state measurements. 18.5 Voltage (V) 18.0 18 V 17.5 Tc = 25 C Tc = 55 C 17.0 Tc = 85 C Tc = 105 C 16.5 16.0 15.5 200 300 400 500 600 700 800 900 1000 1100 1200 Current (mA) 37.0 Voltage (V) 36.0 36 V 35.0 Tc = 25 C Tc = 55 C 34.0 Tc = 85 C Tc = 105 C 33.0 32.0 31.0 100 150 200 250 300 350 400 450 500 550 600 Current (mA) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 XLAMP (R) CXB1512 LED RELATIVE LUMINOUS FLUX The relative luminous flux values provided below are the ratio of: * Measurements of CXB1512 at steady-state operation at the given conditions, divided by * Flux measured during binning, which is a pulsed measurement at 700mA at TJ = 85C for the 18V CXB1512 LED. Using the 18V CXB1512 LED as an example, at steady-state operation of Tc = 25C, IF = 800mA, the relative luminous flux ratio is 120% in the chart below. A CXB1512 LED that measures 1290lm during binning will deliver 1548lm (1290 * 1.2) at steady-state operation of Tc = 25C, IF = 800mA. 180% Relative Luminous Flux 160% 18 V 140% 120% Tc = 25 C 100% Tc = 55 C Tc = 85 C 80% Tc = 105 C 60% 40% 20% 0% 200 300 400 500 600 700 800 900 1000 1100 1200 Current (mA) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLAMP (R) CXB1512 LED RELATIVE LUMINOUS FLUX - CONTINUED The relative luminous flux values provided below are the ratio of: * Measurements of CXB1512 at steady-state operation at the given conditions, divided by * Flux measured during binning, which is a pulsed measurement at 350mA at TJ = 85C for the 36V CXB1512 LED. Using the 36V CXB1512 LED as an example, at steady-state operation of Tc = 25C, IF = 400mA, the relative luminous flux ratio is 120% in the chart below. A CXB1512 LED that measures 1290lm during binning will deliver 1548lm (1290 * 1.2) at steady-state operation of Tc = 25C, IF = 400mA. 180% Relative Luminous Flux 160% 36 V 140% 120% Tc = 25 C 100% Tc = 55 C Tc = 85 C 80% Tc = 105 C 60% 40% 20% 0% 100 150 200 250 300 350 400 450 500 550 600 Current (mA) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLAMP (R) CXB1512 LED Far Field TYPICAL SPATIAL DISTRIBUTION 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () PERFORMANCE GROUPS - BRIGHTNESS (18V, I F = 700mA; 36V, IF = 350mA, TJ = 85C) XLamp CXB1512 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux J4 1120 1200 K2 1200 1290 K4 1290 1380 1485 M2 1380 M4 1485 1590 N2 1590 1710 N4 1710 1830 P2 1830 1965 P4 1965 2100 Q2 2100 2260 Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 22 XLAMP (R) CXB1512 LED EASYWHITE(R) PERFORMANCE GROUPS - CHROMATICITY (TJ = 85C) XLamp CXB1512 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures - 2-Step Code 40H 35H 30H 27H CCT 4000K 3500K 3000K 2700K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 EasyWhite Color Temperatures - 3-Step Ellipse Center Point Major Axis Minor Axis x y a b Rotation Angle () 5000K 0.3447 0.3553 0.00840 0.00312 65.0 4000K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5 22G 2200K 0.5066 0.4158 0.00980 0.00480 45.5 Bin Code CCT 50G 40G EasyWhite Color Temperatures - 5-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle () 6500K 0.3123 0.3282 0.01110 0.00550 61.0 5700K 0.3287 0.3417 0.01230 0.00600 72.0 50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0 40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7 Bin Code CCT 65E 57E Center Point Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 23 XLAMP (R) CXB1512 LED PREMIUM COLOR PERFORMANCE GROUPS - CHROMATICITY (TJ = 85C) XLamp CXB1512 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. Fidelity EasyWhite Color Temperatures - 2-Step Code L5A 35H 30H 27H CCT 4000K 3500K 3000K 2700K x y 0.3764 0.3711 0.3784 0.3787 0.3847 0.3826 0.3825 0.3748 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 Specialty EasyWhite Color Temperatures - 2-Step Code L7B L7C CCT 3000K 3000K x y 0.4263 0.3848 0.4296 0.3916 0.4361 0.3938 0.4326 0.3868 0.4192 0.3754 0.4224 0.3823 0.4291 0.3847 0.4257 0.3777 EasyWhite Color Temperatures - 3-Step Ellipse Center Point Major Axis Minor Axis x y a b Rotation Angle () 3100K 0.4236 0.3888 0.00848 0.00455 50.3 30Q 3000K 0.4305 0.3935 0.00834 0.00408 53.2 30U 3000K 0.4274 0.3837 0.00834 0.00408 53.2 Bin Code CCT 31Q Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 24 XLAMP (R) CXB1512 LED CREE EASYWHITE(R) BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85C) 0.45 ANSI C78.377 Quadrangle 0.44 2700 K EasyWhite 5-step 0.43 2200 K 2450 K 3000 K EasyWhite 3-step 0.42 EasyWhite 2-step 3500 K 0.41 4000 K 0.40 CCy 0.39 5000 K 4500 K 5700 K 0.38 0.37 6500 K 0.36 0.35 7000K 0.34 0.33 0.32 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.31 CCx Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 25 XLAMP (R) CXB1512 LED CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85C) Fidelity (2-step) 0.44 2700K ANSI C78.377 Quadrangle 0.43 3000K 0.42 3500K 0.41 27H 4000K CCy 0.40 30H 4500K 35H 0.39 0.38 L5A 0.37 0.36 0.35 0.48 0.47 0.46 0.45 0.44 CCx 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 26 XLAMP (R) CXB1512 LED CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85C) - CONTINUED Speciality (2-step) 0.44 ANSI C78.377 Quadrangle 3000 K 0.43 0.42 3500 K CCy 0.41 0.40 0.39 L7B L7C 0.38 0.46 0.45 CCx 0.44 0.43 0.42 0.41 0.37 Speciality (3-step) 0.44 ANSI C78.377 Quadrangle 3000K 0.43 0.42 3500K CCy 0.41 0.40 30Q 0.39 31Q 30U 0.38 0.46 0.45 CCx 0.44 0.43 0.42 0.41 0.37 Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 27 XLAMP (R) CXB1512 LED BIN AND ORDER CODE FORMATS Bin codes and order codes are configured as follows: Order Code Bin Code Series = CXB15 Series = CXB15 Internal code Chromaticity bin Version 0 = Standard P = eTone Vf class: F0 = 18-V class N0 = 36-V class CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Z = 95 CRI minimum Version 0 = Standard P = eTone SSSSSCC-HHHH-HHEGGRNNNNN Kit code SSSSSCC-WWW-FF-GGR-EAAAA Internal code Vf class: F0 = 18-V class N0 = 36-V class CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Z = 95 CRI minimum Performance class Flux bin Performance class Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 28 XLAMP (R) CXB1512 LED MECHANICAL DIMENSIONS Dimensions are in mm. Tolerances unless otherwise specified: +.13 x +1 B1512F = 18V CXB1512 B1512N = 36V CXB1512 B1512Fe = 18V CXB1512 eTone B1512X Meaning of LED marking B1512Ne = 36V CXB1512 eTone Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 29 XLAMP (R) CXB1512 LED THERMAL DESIGN The CXB family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure that the CXB LED is being operated within its designed limits. LES temperature measurement provides additional verification of good thermal design. Please refer to page 4 for the Operating Limit specifications. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from TSP to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXB soldering recommendations and more information on thermal interface materials (TIM), LES temperature measurement, and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXB LEDs successfully in luminaire designs. To keep the CXB1512 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following graphs, depending on the operating environment. The yaxis in the graphs is a base 10 logarithmic scale. R_j-c R_j-c Tc Tc R_tim As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim) R_c-a plus the thermal resistance of the heat sink (R_hs). R_hs CXB1512 - 18 V Ta Ta 100.00 18 V Maximum R_c-a 10.00 Ta = 25 C Ta = 55 C 1.00 Ta = 85 C Ta = 105 C 0.10 0.01 200 300 400 500 600 700 800 900 1000 1100 1200 Current (mA) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 30 XLAMP (R) CXB1512 LED V THERMALCXB1512 DESIGN -- 37 CONTINUED 100.00 36 V Maximum R_c-a 10.00 Ta = 25 C Ta = 55 C 1.00 Ta = 85 C Ta = 105 C 0.10 0.01 100 200 300 400 500 600 Current (mA) Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 31 XLAMP (R) CXB1512 LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks and eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 32 XLAMP (R) CXB1512 LED PACKAGING Cree CXB1512 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100 6 5 4 3 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. 2 NOTICE ENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND AL INFORMATION OF CREE, INC. THIS PLOT COPIED, REPRODUCED OR DISCLOSED TO ANY ED PERSON WITHOUT THE WRITTEN CONSENT NSENT Dimensions are in inches. Tolerances: +.13 x +1 5 4 3 5.875 2 1 R .375 6 5 4 NOTICE FIDENTIAL. THIS PLOT AND THE INFORMATION D WITHIN ARE THE PROPRIETARY AND TIAL INFORMATION OF CREE, INC. THIS PLOT E COPIED, REPRODUCED OR DISCLOSED TO ANY IZED PERSON WITHOUTTHE WRITTEN CONSENT C. 3 5.875 2 1 .875 R .375 5.875 R.375 5.875 .875 .875 5.875 LABEL WITH CREE BIN CODE, QUANTITY, LOT # BAG .38 .875 PATENT LABEL IS LOCATED PATENT LABEL IS ON UNDERSIDE OFLOCATED COVER ON UNDERSIDE OF CARTON ITH CREE BIN ANTITY, LOT # .875 LABEL WITH CREE .875 BIN CODE, QTY, LOT# BAG BAG .38 .38 LABEL WITH CREE BIN CODE, QUANTITY, LOT # PATENT LABEL EL IS LOCATED IS LOCATED ON UNDERSIDE OF CARTON IDE OF COVER LABEL WITH CREE BIN CODE, QTY, LOT# LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: LABEL WITH CREE BIN CODE, QUANTITY, LOT # .X .XX .XXX X THIRD ANGLE PROJECTION 6 5 3.X .XX 0.1 .05 .XXX DRAWN .005BY X 1 4 THIRD ANGLE PROJECTION L WITH CREE BIN QUANTITY, LOT # Copyright (c) 2015-2019 Cree, Inc. All rights reserved. The information in this document is subject to change eToneTM is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 4 THIRD ANGLE PROJECTION APPROVED 0.1 .05 .005 1 FOR SHEET METAL PARTS ONLY .X .06 .XXX APPROVED .010 X 2 MATERIAL DATE CXA15 SIZE FINAL PROTECTIVE FINISH DRAW C CXA 4600 Silicon Dri Durham, N.C 27 SCALE Phone (919) 361 0.500 Fax (919) 313-5 2 DATE TITLE CXA15XX_DATASHEET DATE SIZE C DRAWING NO. 4600 Silicon Drive Durham, N.C 27703 Phone (919) 361-4770 CXA15XX_DATASHEET_BAG2013 are registered trademarks and Fax (919) 313-5303 DATE SCALE TITLE 2 0.500 SHEET CXA15XX_DATASHEET 33 SIZE FINAL PROTECTIVE FINISH DATE APPROVED TITLE MATERIAL UNLESS OTHERWISE SPECIFIED DIMENSIONS AREFOR IN SHEET METAL PARTS ONLY CHECK DATE MILLIMETERS & BEFORE FINISH. .X .06 (R) (R) (R) PROTECTIVE FINISH withoutTOLERANCE notice. Cree the Cree .XX logo, XLamp andFINALEasyWhite UNLESS, SPECIFIED: .03 .X .XX 3.XXX X DATE MATERIAL FOR SHEET METAL PARTS ONLY DRAWN BY .06 DATE UNLESS OTHERWISE SPECIFIED .X .XX .03 DIMENSIONS ARE IN CHECK .XXX .010 DATE MILLIMETERS & BEFORE FINISH. 2 TOLERANCE UNLESS SPECIFIED: X LABEL WITH CREE BIN CODE, QTY, LOT# 6 0.1 .05 .005 1 DRAWN BY CHECK 1 DRAWING NO. CXA15XX_DATASHEET_BAG2013 OF