Data Sheet ACD-6 PRO 1000A Clamp-on Multimeter Simple to operate and well-suited for high current applications. 1000 No hassle warranty No waiting. No shipping charges. Our commitment to high-quality products and customer service is demonstrated by our industry exclusive "No Hassle" warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. Amp AC current AC/DC voltage to 600V Resistance Continuity Beeper Relative zero mode Auto power off Data hold Carrying case included Large, easy to read digital display Accommodates conductors up to 45mm (1.77") in diameter ACD-6 PRO (note: $500 MSLP limit) 600V Amprobe(R) Test Tools www.Amprobe.com Data Sheet ACD-6 PRO 1000A Digital Clamp-on Multimeter Electrical Specifications Accuracy is (% reading digits + number of digits) or otherwise specified, at 23 C 5 C (73F 9F) & less than 75% R.H. Range Accuracy DC Voltage 400.0 mV 1.0% + 3d 4.000V, 40.00V, 400.0V 1.7% + 3d 600V 2.0% + 4d NMRR : >50dB @ 50/60Hz CMRR : >120dB @ DC, 50/60Hz, Rs=1k Input Impedance: 10M, 30pF nominal (1000M for 400.0mV range) Audible Continuity Tester Open Circuit Voltage: 0.4VDC typical 400.0 1.5% + 6d Audible threshold: between 10 and 120. Resistance 400.0 1.5% + 6d 4.000k, 40.00k, 400.0k 1.0% + 4d 4.000M 1.5% + 4d 40.00M 2.5% + 4d Open Circuit Voltage: 0.4VDC typical AC Voltage 50Hz -- 500Hz 400.0mV 1) 4.0% + 5d 50Hz -- 60Hz 4.000V, 40.00V, 400.0V 2.0% + 5d 60Hz -- 500Hz 4.000V, 40.00V, 400.0V 2.5% + 5d 50Hz -- 500Hz 600V 3.0% + 5d CMRR : >60dB @ DC to 60Hz, Rs=1k Input Impedance : 10M, 30pF nominal 1)Selection by RANGE button manually, and is specified from AC 40mV (AC 60mV for True RMS model ACD-6 TRMS-PRO) and up Diode Tester Open Circuit < 1.6 VDC Voltage Test Current (Typical) 0.4mA AC Current (Clamp-on) 50Hz / 60Hz 400.0A 1.5% + 5d 1000A 1.5% + 5d 1) Add 8d to specified accuracy while reading is below 15% of range 2) Induced error from adjacent current carrying conductor: < 0.06A/A 3) Specified accuracy is for measurements made at the jaw center. When the conductor is not positioned at the jaw center, position errors introduced are: Add 1% to specified accuracy for measurements made WITHIN jaw marking lines (away from jaw opening) Add 4% to specified accuracy for measurements made BEYOND jaw marking lines (toward jaws opening) Amprobe(R) Test Tools www.Amprobe.com ACD-6 PRO 1000A Digital Clamp-on Multimeter Data Sheet General Specifications Display : 3-3/4 digits 4000 counts LCD display Update Rate : 3 per second nominal Polarity : Automatic Low Battery : Below approx. 2.4V Operating Temperature : 0C TO 40C (32F TO 104F) Relative Humidity : Maximum relative humidity 80% for temperature up to 31C decreasing linearly to 50% relative humidity at 40C Altitude : Operate below 6,562ft (2000m) Storage Temperature : -20C to 60C (-4F to 140F), < 80% R.H. (with battery removed) Temperature Coefficient : nominal 0.15 x (specified accuracy)/C @ 0C -18C or 28C -40C (32F - 64F OR 82F - 104F), or otherwise specified Sensing : Average sensing Safety : Meets EN61010-1:2001; IEC61010-2-032(1994), EN61010-2-032(1995), UL3111-2-032(1999). Category III 600 Volts AC & DC. Transient protection : 6.5kV (1.2/50s surge) for all models Pollution degree : 2 E.M.C. : Meets EN61326 In an RF field of 3V/m: Total Accuracy = Specified Accuracy + 45 digits Performance above 3V/m is not specified Overload Protections : ACA Clamp-on jaws : AC 1000A rms continuous + & COM terminals (all functions) : 600VDC/VAC rms Power Supply : One 3V coin battery (ANSI/NEDA-5004LC, IEC-CR2032) Power Consumption : 2.2 mA typical APO Timing : Idle for 30 minutes APO Consumption : 190A typical on voltage & current functions Dimension : L224mm X W78mm X H40mm Weight : 220 gm approx Jaw opening & Conductor diameter : 45mm max www.Amprobe.com ACD-6 PRO 1000A Digital Clamp-on Multimeter Data Sheet Included Accessories Test leads MTL-90B, Carrying case SV-U, Users manual Optional Accessories ELS2A Line splitter (Energizer) ACF-3000AK 3000A AC Flexible Clamp-on Attachment TMA-K Single Input Thermocouple Temperature Attachment VRC-320 Alligator Clips (For test leads) Amprobe(R) Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE Amprobe(R) Test Tools Europe In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 (c)2007 Amprobe Test Tools. All rights reserved. 9/2007 3128732 Rev A Amprobe(R) Test Tools www.Amprobe.com