55A0131-22-0/2/9 - TE Connectivity / Raychem

Users should evaluate the suitability of this product for their application. Specications are subject to change without notice.

Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specication, without notication to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,

AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: “901/902...” MAY BE REPLACED BY “Axxx”.) OTHER CODES AND

SUFFIXES MAY BE ADDED TO THE PART NUMBER AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

Page 1 of 1

The TE logo, Tyco Electronics and Raychem are trademarks. Raychem Wire & Cable

501 Oakside Avenue

Redwood City, CA 94063-3800

Phone: 1-800-227-8816

Fax: 1-650-361-6297

DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

COMPONENT WIRES - 55A0111

NOTE: Nominal values are for information only.

Nominal values are not requirements.

SPECIFICATION CONTROL DRAWING 55A0131

THREE CONDUCTOR CABLE, UNSHIELDED, UNJACKETED, GENERAL PURPOSE, 600 VOLT 7-31-09 C

This specication sheet forms a part of the latest issue of Raychem Specication 55A.

TITLE Date Revision

CABLE CONSTRUCTION DETAILS

PART NUMBER

CONDUCTOR

SIZE

(AWG)

OUTSIDE DIAMETER

(inches) MAXIMUM

WEIGHT

(lbs/1000 ft.)

NOMINAL MAXIMUM

55A0131-30-* 30 .052 .056 2.0

55A0131-28-* 28 .058 .063 2.8

55A0131-26-* 26 .069 .073 4.2

55A0131-24-* 24 .080 .084 6.1

55A0131-22-* 22 .093 .097 8.6

55A0131-20-* 20 .108 .112 13.2

55A0131-18-* 18 .130 .134 19.9

55A0131-16-* 16 .147 .151 25.4

55A0131-14-* 14 .184 .190 39.8

55A0131-12-* 12 .222 .229 60.3

CABLE RATINGS AND ADDITIONAL REQUIREMENTS

TEMPERATURE RATING: 150°C

Maximum continuous conductor temperature

VOLTAGE RATING: 600 volts (rms) at sea level

INSULATION FLAWS:

Spark Test, 5.7 kV (rms) at 3 kHz

Impulse Dielectric Test, 8.0 kV (peak)

PART NUMBER:

The “*” in the part numbers above shall be replaced by color

code designators with a slash separating the component wire

colors. Colors shown do not necessarily reect the sequence

of manufacturing.

1/ Example: AWG 22, black, brown and red component wires:

55A0131-22-0/1/2