O35-50 JACK \ 748 REVISIONS REV DESCRIPTION DATE APPROVED 014 REVISED ap 10/19/95 Tom 4/5/96 19.0 [ GROOVE 240 ; | 312 230 79 DIA Sp DIA | M7,0 X 0,75-6g | .250 6.4 NOTES: 1. CAPTURED CENTER CONTACT DESIGN CONTROL REQUIRED XXX XX.X = mm 53 DIA 250-36 UNS-2A , ACROSS FLATS "OS 2.9" JACK HOUS ING DIELECTRIC CENTER CONTACT A582, STAINLESS STEEL PER ASTM- A484 AND ASTM- TYPE 303 TFE FLUOROCARBON PER ASTM-D-1457 BERYLLIUM COPPER PER QQ-P-35 N/A PASSIVATE PER GOLD PLATE PER ASTM-B-196 OR ASTM-B- 197, MIL-G-45204 ALLOY C17300, CONDITION H COMPONENT MATERIAL FINISH UNLESS OTHERWGSE SPEOFED ~~ /oRAw DIMENSIONS ARE IN INCHES TOLERANCE ON FRAC DEC ANGLES |_ 1/54 #005 27 These drawings and specificot- long ore the property of M/A-COM incorporated and shall not be reproduced or copled or used In whole or In part as the basie fer the manufacture or edle of Item(s) without written permaaion. USE ASSY NO. AP_ ow 2/2/95 TITLE PROCEDURE AMP incorporated 140 Fourth Avenue Waltham. MA 02451-7599 OS-50 JACK TO "OS 2.9" JACK N/A 26805 1250-2187-02 | 01, iy wi 6:1 SHEET 1 OF 1 CUSTOMER DRAWING AMP PART # 1046295-1 SHEET 10F 1 REV A