FCN-723J016/1M-HN - Fujitsu Limited

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

■FEATURES

• The 720 series connectors (crimp type connectors)

are designed for a wide range of uses.

• 1-row and 2-row types are available to allow various

types of mounting.

• DIP sockets allow board-to-board connections (for 18-

pin type only).

• Contact pitch of 2 × 2 mm (0.079 × 0.079 in.),

mounting height of 3.8 mm (0.149 in.) for crimp type,

and 6.6 mm (0.260 in.) for DIP type. A compact and

low profile allows high density mounting.

• Multiple crimp sockets can be aligned in contact with

each other to connect with one header on a PC board.

• Insulator material is UL approved (94V-0/94V-1).

■SPECIFICATIONS

Item

Operating temperature range

Current rating

Voltage rating

Contact resistance

Insulation resistance

Dielectric strength

Applicable wire

Specification

–55°C to +85°C

DC 3 A

AC 250 V

20 mΩ max. (DC 6 V, 0.1 A)

1000 MΩ max. (500 V)

AC 500 V for 1 minute

AWG #26 to #34

■MATERIALS

Item

Insulating material

Conductor

Plating

Plug

Plug (SMT)

Housing

Contact

Terminal

Materials

Polyester (UL94V-0)

PPS

PPO

Copper alloy

Gold

Palladium

PC BOARD CONNECTORS

720M SERIES (CRIMP TYPE CONNECTORS)

720M Series (Crimp Type Connectors)

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

■ORDERING CODE

1. Plug

2. Housing

FCN-72 3 J 018 / 2 M

M series

Main body

1: 1-row type

2: 2-row type

Number of contacts

J: Socket

Tail type

3: Crimp

4: Straight (for 18-contact type only)

720 series

Fujitsu connector

FCN-72 4 P 018-G/W M

M series

Main body

S: 1-row type

W: 2-row type

R: 1-row type (SMT)

Plating

G: Gold

T: Tin

Number of contacts

P: Plug

Tail type

4: Straight

5: Right-angle

8: SMT

720 series

Fujitsu connector

720M Series (Crimp Type Connectors)

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

HOUSING (1-ROW TYPE)

■DIMENSIONS

Unit: mm (in.)

■PART NUMBERS AND DIMENSIONS

2.0(0.079)

Pin No. 1

6.5(0.256)

3.2 (0.126)

Number of

contacts

Part number

FCN-723J002/1M

FCN-723J003/1M

FCN-723J004/1M

FCN-723J005/1M

FCN-723J006/1M

FCN-723J007/1M

FCN-723J008/1M

FCN-723J009/1M

FCN-723J010/1M

FCN-723J011/1M

FCN-723J012/1M

FCN-723J013/1M

FCN-723J014/1M

FCN-723J015/1M

FCN-723J016/1M

FCN-723J017/1M

FCN-723J018/1M

Dimensions: mm (in.)

4.0 (0.157)

6.0 (0.236)

8.0 (0.315)

10.0 (0.394)

12.0 (0.472)

14.0 (0.551)

16.0 (0.630)

18.0 (0.708)

20.0 (0.787)

22.0 (0.866)

24.0 (0.945)

26.0 (1.023)

28.0 (1.102)

30.0 (1.181)

32.0 (1.260)

34.0 (1.339)

36.0 (1.417)

2.0 (0.079)

4.0 (0.157)

6.0 (0.236)

8.0 (0.315)

10.0 (0.394)

12.0 (0.472)

14.0 (0.551)

16.0 (0.630)

18.0 (0.708)

20.0 (0.787)

22.0 (0.866)

24.0 (0.945)

26.0 (1.023)

28.0 (1.102)

30.0 (1.181)

32.0 (1.260)

34.0 (1.339)

Note: For 'Lite PAGOS' add -HN to part number.

720M Series (Crimp Type Connectors)

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

CRIMP CONTACT

■DIMENSIONS

1. Parts in bulk

Tool: Hand crimping tool

Tin-plated

FCN-723J-T/AM

Gold-plated

FCN-723J-G/AM

Applicable contactApplicable wire

size (AWG#)

#26

#28

#30

#32

#34

Unit: mm (in.)

2. Parts in strips

Tool: Semiautomatic crimping tool

5.5(0.216)

2.45(0.096)

1.15(0.045)

Tin-plated

FCN-723J-T/BM

Gold-plated

FCN-723J-G/BM

Applicable contactApplicable wire

size (AWG#)

#26

#28

#30

#32

#34

Unit: mm (in.)

5.5(0.216)

2.45(.096)

1.15(0.045)

10.5(0.413)

5.08(0.208)

720M Series (Crimp Type Connectors)

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

CRIMPING TOOLS

■NOTES ON USING CRIMPING TOOLS

• Many crimping tools are available,

but they are not compatible. Always

use the crimping tools specified by

Fujitsu.

• When using crimping tools, be sure

to adjust the crimp height according

to the table below. Otherwise, wire

may be loose or break off.

Semiautomatic

crimping tool Hand crimping tool

Crimp height

Wire to be crimped

■HAND CRIMPING TOOL

Wire

gauge

(AWG#)

#26

#28

#30

#32

#34

Insulator

diameter

(mm (in.)) Hand crimping tool

FCN-723T-T021/H

FCN-723T-T022/H

Gold-plated

FCN-723J-G/AM

Tin-plated

FCN-723J-T/AM

Stripped

length

(mm (in.))

1.2 to 1.6

(.047 to

.063)

Contact type

■SEMIAUTOMATIC CRIMPING TOOL

Wire

gauge

(AWG#)

#26

#28

#30

#32

#34

Insulator

diameter

(mm (in.)) Gold-plated

FCN-723J-G/BM

Tin-plated

FCN-723J-T/BM

Stripped

length

(mm (in.))

1.2 to 1.6

(.047 to

.063)

Contact type

Semiautomatic crimping tool

Press

FCN-M100

Applicator

FCN-A121

FCN-A122

Note: FCN-M100 conventional 3-ton press is also available. Contact us.

■UNITS OF ORDERING PARTS IN STRIPS

Part number

FCN-723J-G/BM

FCN-723J-T/BM

Units of order

10,000

Stripped length (mm (in.))

1.2(0.047) to 1.6(0.063)

Wire cross-

sectional area

(mm (in.))

0.1 to 0.16

(0.0039 to 0.0063)

0.065 to 0.096

(0.0025 to 0.0038)

0.05 to 0.06

(0.0019 to 0.0024)

0.032 to 0.038

(0.0013 to 0.0015)

0.02 to 0.023

(0.0008 to 0.0009)

Crimp height

(mm (in.))

0.64 to 0.70

(0.025 to 0.027)

0.60 to 0.66

(0.024 to 0.026)

0.62 to 0.68

(.0244 to .0268)

0.60 to 0.66

(0.024 to 0.026)

0.58 to 0.64

(0.023 to 0.025)

Wire cross-

sectional area

(mm (in.))

0.1 to 0.16

(0.0039 to 0.0063)

0.065 to 0.096

(0.0025 to 0.0038)

0.05 to 0.06

(0.0019 to 0.0024)

0.032 to 0.038

(0.0013 to 0.0015)

0.02 to 0.023

(0.0008 to 0.0009)

Crimp height

(mm (in.))

0.64 to 0.70

(0.025 to 0.027)

0.60 to 0.66

(0.024 to 0.026)

0.62 to 0.68

(.0244 to .0268)

0.60 to 0.66

(0.024 to 0.026)

0.58 to 0.64

(0.023 to 0.025)

φ1.1 to φ1.4

(0.043 to 0.055)

φ0.7 to φ1.0

(0.028 to 0.039)

φ0.8 to φ1.4

(0.031 to 0.055)

φ0.5 to φ1.3

(0.020 to 0.051)

Contact type

720M Series (Crimp Type Connectors)

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

POLARIZING KEY

■DIMENSIONS

Part number: FCN-720A01

1.2(0.047)

3(0.118)

0.65(0.026)

Note : Can be ordered in units of 10.

Unit: mm (in.)

■SPECIFICATION OF POLARITY TO PREVENT INCORRECT INSERTION

Plug

Pull out a specified pin.

Specify a two-digit pin number with polarity at the

end of the part number.

Example: When specifying pin No. 4

FCN-725P018-G/WM#4

Socket

Plug a polarizing key into a specified position.

Specify a two-digit pin number with polarity at the

end of the part number.

Example: When specifying pin No. 4

FCN-723J018/2M#4

Polarization

Specification

of their respective owners. Rev. 09/2001

Japan

Fujitsu Component Limited

Gotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-ku

Tokyo 141, Japan

Tel: (81-3) 5449-7010

Fax: (81-3) 5449-2626

Email: promothq@ft.ed.fujitsu.com

Web: www.fcl.fujitsu.com

North and South America

Fujitsu Components America, Inc.

250 E. Caribbean Drive

Sunnyvale, CA 94089 U.S.A.

Tel: (1-408) 745-4900

Fax: (1-408) 745-4970

Email: marcom@fcai.fujitsu.com

Web: www.fcai.fujitsu.com

Europe

Fujitsu Components Europe B.V.

Diamantlaan 25

2132 WV Hoofddorp

Netherlands

Tel: (31-23) 5560910

Fax: (31-23) 5560950

Email: info.marketing@fceu.fujitsu.com

Web: www.fceu.fujitsu.com

Asia Pacific

Fujitsu Components Asia Ltd.

102E Pasir Panjang Road

#04-01 Citilink Warehouse Complex

Singapore 118529

Tel: (65) 375-8560

Fax: (65) 273-3021

Email: fcal@fcal.fujitsu.com

www.fcal.fujitsu.com

Fujitsu Components

International

Headquarter

Offices