SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282
Description
SF4 Made with Galliu m Aluminum Arsenid e Infrared
Emitting diodes.
Part Number: APTD3216SF4C
3.2x1.6mm INFRARED EMITTING DIODE
Features
z3.2mmx1.6mm SMT LED,1.8mm THICKNESS.
zMECHANICALLY AND SPECTRALLY MATCHED TO
APTD3216 PHOTOTRANSISTOR
zWATER CLEAR LENS
zPACKAGE: 2000PCS / REEL.
●MOISTURE SENSITIVITY LEVEL : LEVEL 3.
●RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282
Selection Guide
Part No. Dice Lens Type
Po( mW/sr) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTD3216SF4C SF4 (GaAlAs) WATER CLEAR 1.6 3.2 50°
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/100 Duty Cycle, 10μs Pulse Width.
Parameter P/N Symbol Typ. Max. Units Test Conditions
Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA
Reverse Current SF4 IR - 10 uA VR=5V
Capacitance SF4 C 90 - pF VF=0V;f=1MHz
Peak Spectral Wavelength SF4 λP 880 - nm IF=20mA
Spectral Bandwidth SF4 Δλ1/2 50 - nm IF=20mA
Parameter Symbol SF4 Units
Power Dissipation PT 80 mW
DC Forward Current IF 50 mA
Peak Forward Current [1] iFS 1.2 A
Reverse Voltage VR 5 V
Operating Temperature TA -40 To + 8 5 °C
Storage Temperature TSTG -40 To +85 °C
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Radiant Intensity/ luminous flux: +/-15%.
Note:
1. Forward Voltage: +/-0.1V.
SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282
APTD3216SF4C
SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282
APTD3216SF4C
Recommended Soldering Pattern
(Units : mm; Toleranc e: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282
PACKING & LABEL SPECIFICATIONS APTD3216SF4C