3.2x1.6mm INFRARED EMITTING DIODE Part Number: APTD3216SF4C Features Description z3.2mmx1.6mm SMT LED,1.8mm THICKNESS. zMECHANICALLY AND SPECTRALLY MATCHED TO SF4 Made with Gallium Aluminum Arsenide Infrared Emitting diodes. APTD3216 PHOTOTRANSISTOR zWATER CLEAR LENS zPACKAGE: 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282 Selection Guide Dice Part No. APTD3216SF4C Po( mW/sr) [2] @ 20mA Lens Type SF4 (GaAlAs) WATER CLEAR Viewing Angle [1] Min. Typ. 21/2 1.6 3.2 50 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR - 10 uA VR=5V Capacitance SF4 C 90 - pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 - nm IF=20mA Spectral Bandwidth SF4 1/2 50 - nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Symbol SF4 Units Power Dissipation PT 80 mW DC Forward Current IF 50 mA Peak Forward Current [1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 C TSTG -40 To +85 C Storage Temperature Note: 1. 1/100 Duty Cycle, 10s Pulse Width. SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282 APTD3216SF4C SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282 APTD3216SF4C Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282 PACKING & LABEL SPECIFICATIONS APTD3216SF4C SPEC NO: DSAB8153 REV NO: V.3 DATE: AUG/07/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1203002282