FPS060WF20136BJ1 - Vishay Presicion Group

Document Number: 22099 For technical questions, contact: powcap@vishay.com www.vishay.com

Revision: 02-May-11 1

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

RF Power Plate Capacitors with Flat Rim,

Class 1 Ceramic

FPS 60, FPS 80, FPS 110

Vishay Draloric

MATERIAL

Capacitor elements made from Class 1 ceramic dielectric

with noble metal electrodes.

Connection terminals made from copper/brass, silver plated

FINISH

Capacitor body completely protective lacquered

MARKING

Type designator, capacitance value and tolerance, rated

peak voltage, production date code, ceramic material code,

manufacturer logo

ACCESSORIES ADDED

Two screws and washers

FEATURES

• Low losses

• High reliability

• Small dimensions

APPLICATIONS

• Industrial high frequency appliances

• Medical RF equipment

• Filter, bypass, and coupling circuits

CAPACITANCE RANGE

100 pF to 1.0 nF

CAPACITANCE TOLERANCE

± 10 %

CERAMIC DIELECTRICS

• R42 (TCC - 250 ppm/K)

• R85 (TCC - 750 ppm/K)

RATED VOLTAGE

• 3.5 kVpp (peak-to-peak voltage)

• 7.0 kVpp (peak-to-peak voltage)

•10 kV

•12 kV

pp (peak-to-peak voltage)

DIELECTRIC STRENGTH TEST

200 % of rated voltage (50 Hz)

DISSIPATION FACTOR

Max. 0.05 %

Measuring frequencies:

1 MHz (< 1 nF); 300 kHz or 100 kHz ( 1 nF)

INSULATION RESISTANCE

Min. 10 000 M (at 25 °C)

OPERATING TEMPERATURE RANGE

- 55 °C to + 100 °C

QUICK REFERENCE DATA

DESCRIPTION VALUE

Ceramic Class 1

Ceramic Dielectric R42, R85

Type FPS 60 FPS 80 FPS 110

Voltage (VDC)10 000,

12 000

3500,

7000 12 000

Min. Capacitance (pF) 100 500 1000

Max. Capacitance (pF) 500 1000 1000

Mounting Screw terminal

www.vishay.com For technical questions, contact: powcap@vishay.com Document Number: 22099

2Revision: 02-May-11

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

FPS 60, FPS 80, FPS 110

Vishay Draloric RF Power Plate Capacitors with Flat Rim,

Class 1 Ceramic

Notes

(1) The surface temperature during operation must not exceed + 100 °C

(2) Peak-to-peak voltage

Note

• Dimensions W2 will vary depending upon capacitance value

SAP PART NUMBER, ELECTRICAL AND DIMENSIONAL DATA

PART NUMBER CERAMIC

CAP.

VALUE

(pF)

RATED

VOLTAGE

(kVp) (2)

RATED

POWER

(kvar) (1)

RATED

CURRENT

(ARMS)

DIA.

DMAX.

mm (inches)

WIDTH

mm (inches)

WIDTH

mm (inches)

TYPE FPS 60

FPS060WF10136BH1

R42 100

10 13 62

(2.44)

29 ± 1

(1.14 ± 0.04)

20 ± 1

(0.79 ± 0.04)

FPS060WF20136BJ1

R85

200 30 ± 1

(1.18 ± 0.04)

21 ± 1

(0.83 ± 0.04)

FPS060WF25136BJ1

250 29 ± 1

(1.14 ± 0.04)

20 ± 1

(0.79 ± 0.04)

FPS060WF30136BJ1

300 27 ± 1

(1.06 ± 0.04)

18 ± 1

(0.71 ± 0.04)

FPS060BH50136BJ1

500 10 25 ± 1

(0.98 ± 0.04)

16 ± 1

(0.63 ± 0.04)

TYPE FPS 80

FPS080VY50136BJ1

R85

500 7.0 15 13 80

(3.15)

29 ± 3

(1.14 ± 0.12)

15 ± 3

(0.59 ± 0.12)

FPS080VT10236BJ1

1000 3.5 15 16 27 ± 3

(1.06 ± 0.12)

11 ± 3

(0.43 ± 0.12)

TYPE FPS 110

FPS110BF10236BJ1

R85 1000 12 30 13 110 + 0 /- 6

(4.33 + 0/- 0.24)

30 ± 3

(1.18 ± 0.12)

16 ± 3

(0.63 ± 0.12)

DIMENSIONS in millimeters (inches)

M6 Threads

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.