01.11.2013Page1/7

Panel feed-through terminal block-UWV 10-3073403

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

Panel feed-through terminal block, Connection method:Screw connection, Load current :76 A, Cross section:0.5

mm²-16 mm², AWG20-8, Connection direction of the conductor to plug-in direction:90 °, Width:10.1 mm,

Spacer plates increase air and creepage distances

Automatic compensation of the panel thickness via the snap principle integrated in the insulation housing



Key commercial data

Packing unit 1 1

Custom tariff number 85369010

Country of origin China

Technical data

Number of levels 1

Surge voltage category III

Insulating material group I

01.11.2013Page2/7

Panel feed-through terminal block-UWV 10-3073403

Technical data

Connection in acc. with standard IEC 60947-7-1

Nominal current IN57 A

Nominal voltage UN500 V with spacer plate

Open side panel nein

Number of positions 1

Conductor cross section stranded min. 0.5 mm²

Conductor cross section stranded max. 10 mm²

Conductor cross section AWG/kcmil min. 20

Conductor cross section AWG/kcmil max 6

Conductor cross section stranded, with ferrule without plastic sleeve min. 0.5 mm²

Conductor cross section stranded, with ferrule without plastic sleeve max. 10 mm²

Conductor cross section stranded, with ferrule with plastic sleeve min. 0.5 mm²

Conductor cross section stranded, with ferrule with plastic sleeve max. 10 mm²

2 conductors with same cross section, solid min. 0.5 mm²

2 conductors with same cross section, solid max. 4 mm²

2 conductors with same cross section, stranded, TWIN ferrules with plastic

sleeve, min. 0.5 mm²

2 conductors with same cross section, stranded, TWIN ferrules with plastic

sleeve, max. 6 mm²

Cross section with insertion bridge, solid max. 10 mm²

Cross section with insertion bridge, stranded max. 10 mm²

Stripping length 11 mm

Internal cylindrical gage B 6

Screw thread M4

Tightening torque, min 1.5 Nm

01.11.2013Page3/7

Panel feed-through terminal block-UWV 10-3073403

Technical data

Connection data

Tightening torque max 1.8 Nm

eCl@ss 6.0 27141134

eCl@ss 7.0 27141134

eCl@ss 8.0 27141134

ETIM 2.0 EC001283

ETIM 3.0 EC001283

ETIM 4.0 EC001283

ETIM 5.0 EC001283

UNSPSC 6.01 30211811

UL Recognized / GOST / GOST

Ex Approvals

Approvals submitted

01.11.2013Page4/7

Panel feed-through terminal block-UWV 10-3073403

Approval details

UL Recognized

 B C D

mm²/AWG/kcmil 20-6 20-6 20-6

Nominal current IN 65 A 65 A 5 A

Nominal voltage UN 300 V 300 V 600 V

Insertion bridge, Number of positions:2, Color:gray

Insertion bridge-EB 3-10-0203328

Insertion bridge, Number of positions:3, Color:gray

01.11.2013Page5/7

Panel feed-through terminal block-UWV 10-3073403

Insertion bridge-EB 10-10-0203137

Insertion bridge, Number of positions:10, Color:gray

Mounting material

Sealing plate-POT-UW 10-3074059

Sealing plate, Color:gray

Partition plate

Spacer plate-DP-UWV 10-3074415

Spacer plate, Color:gray

01.11.2013Page6/7

Panel feed-through terminal block-UWV 10-3073403

Screwdriver-SZS 1,0X4,0 VDE-1205066

Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip

Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat marker groove,

For terminal block width: 10 mm, Lettering field: 5.15 x 10 mm

Marker for terminal blocks-UC-TM 10-0818069

Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,

Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm

Marker for terminal blocks-UC-TMF 10-0818124

01.11.2013Page7/7

Panel feed-through terminal block-UWV 10-3073403

Marker for terminal blocks-TMT 10 R-0816210

THERMOMARK S1.1, Perforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, For

terminal block width: 10.2 mm, Lettering field: 6.35 x 10.15 mm