THYRISTOR MODULE PK(PD,PE)40FG UL;E76102 M Power Thyristor/Diode Module PK40FG series are designed for various rectifier circuits and power controls. For your circuit application, following internal connections and wide voltage ratings up to 1600V are available. and electrically isolated mounting base make your mechanical design easy. 92 2 2 2 5 35 Internal Configurations K G 950A 100A/s dv/dt 1000V/s di/dt IT(AV) 40A, IT(RMS) 62A, ITSM KG -6 Mx1 A1K2 1 K1 G1 A2 3 2 1 K2 A1K2 PK 4-TAB K1 A2 PE NAME PLATE MAX 2 K2 3 K2 G2 K2 G2 Applications Various rectifiers AC/DC motor drives Heater controls Light dimmers Static switches K2 3 2 A1K2 1 K2 K1 G1 A2 UnitA PD Maximum Ratings Tj25 unless otherwise specified Ratings Symbol Item PK40FG40 PD40FG40 PE40FG40 PK40FG80 PD40FG80 PE40FG80 PK40FG120 PD40FG120 PE40FG120 PK40FG160 PD40FG160 PE40FG160 Unit VRRM Repetitive Peak Reverse Voltage 400 800 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 1300 1700 V VDRM Repetitive Peak off-state Voltage 400 800 1200 1600 V Symbol Item ITAV Average On-state Current ITRMS R.M.S. On-state Current ITSM It 2 Conditions Single phase, half wave, 180conduction, Tc83 Single phase, half wave, 180conduction, Tc83 Surge On-state Current 1 2 I t Value for one cycle surge current 2 Cycle, 50/60HZ, Peak Value, non-repetitive Ratings Unit 40 A 62 A 870/950 3760 A A2S PGM Peak Gate Power Dissipation 10 W PGAV Average Gate Power Dissipation 1 W 3 A 10 V IFGM Peak Gate Current VFGM Peak Gate Voltage (Forward) VRGM Peak Gate Voltage (Reverse) di/dt VISO Critical Rate of Rise of On-state Current Tj Tstg Isolation Breakdown VoltageR.M.S. 5 IG100mA VD12VDRM di G /dt0.1A/s V A/s 2500 V Operating Junction Temperature -40 to 125 Storage Temperature Mounting Torque A.C. 1minute 100 -40 to 125 MountingM5 Recommended Value 1.5-2.515-25 2.728 TerminalM5 Recommended Value 1.5-2.515-25 2.728 Nm fB 170 g Ratings Unit Mass Typical Value Electrical Characteristics Symbol Item Conditions IDRM Repetitive Peak off-state Current,max Tj125VDVDRM IRRM Repetitive Peak Reverse Current,max Tj125VDVDRM VTM On-state Voltage,max IT120A 10 mA 10 mA 1.6 V IGT Gate Trigger Current,max VD6VIT1A 50 mA VGT Gate Trigger Voltage,max VD6VIT1A 3 V VGD Gate Non-Trigger Voltage,min Tj125VD12VDRM 0.25 V dv/dt Critical Rate of Rise of off-state Voltage,min Tj125VD23VDRM 1000 V/s Junction to case 0.65 /W Rthj-cThermal Impedance,max markThyristor and Diode part. No markThyristor part SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com http://store.iiic.cc/ PK(PD,PE)40FG Gate Characteristics VFGM10V PG M 10 W PG AV W On-State CurrentA IFGMA Gate VoltageV Gate CurrentmA 1 On-State VoltageV Surge On-State Current Rating Non-Repetitive Transient Thermal Impedance j-c/W Surge On-State CurrentA = Maximum VGD On-State Voltage max Transient Thermal Impedance Per One Element HZ HZ = start Junction to Case Per One Element Timecycles http://store.iiic.cc/ Time tsec