MODEL
ZUW1R50512 ZUW1R50515 ZUW1R51212 ZUW1R51215 ZUW1R52412 ZUW1R52415 ZUW1R54812 ZUW1R54815
MAX OUTPUT WATTAGE[W] 1.56 1.50 1.56 1.50 1.56 1.50 1.56 1.50
DC OUTPUT
VOLTAGE[V]
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.065 0.050 0.065 0.050 0.065 0.050 0.065 0.050
SPECIFICATIONS
MODEL
ZUW1R50512 ZUW1R50515 ZUW1R51212 ZUW1R51215 ZUW1R52412 ZUW1R52415 ZUW1R54812 ZUW1R54815
INPUT
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 72
CURRENT[A]
*1
0.466typ 0.448typ 0.183typ 0.176typ 0.092typ 0.088typ 0.046typ 0.044typ
EFFICIENCY[%]
*1
67typ 67typ 71typ 71typ 71typ 71typ 71typ 71typ
OUTPUT
VOLTAGE[V] t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)
CURRENT[A] 0.065 0.050 0.065 0.050 0.065 0.050 0.065 0.050
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
*2
120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p]
*2
150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV]
-20 to +55C
150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV]
*3
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
Fixed
OUTPUT VOLTAGE SETTING[V]
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
ISOLATION
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
INPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
OUTPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-20 to +71C,20 - 95%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-40 to +85C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each X,Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1,EN60950-1,CSA C22.2 No.60950-1 Complies with IEC60950-1
OTHERS CASE SIZE/WEIGHT 27.5X7X18mm (WXHXD)/ 10g max
COOLING METHOD Convection
Output pins can be connected in series to make a 24V/30V output.
*1Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2Measured by 20MHz oscilloscope.
*3The drift is a change at 25Cof ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
*The output specification is at t12V and t15V.
*Series/Parallel operation with other model is not possible.
ZUW1R5
DC-DC Converters PCB Mount type
ZU W 1R5 12 12
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
R
12345
ZU/ZT
ZU/ZT-18
¡DERATING CURVE
¡RISE TIME & FALL TIME (ZUW1R50515:+15V)
¡OVERCURRENT CHARACTERISTICS (ZUW1R50515)
¡STATIC CHARACTERISTICS (ZUW1R50515)
OUTPUT CURRENT(+) A
OUTPUT VOLTAGE V
0
15
10
5
0.05 0.10 0.15
(-)Io=100%
ZU/ZT
ZU/ZT-19
ZUW1R5
External view
Outline
¶
Recomended size for
processing PCB
(TOP VIEW)
6.35
12.7
6.35
17.78
(1.25)
(1.25)
(1.25) (1.25)
5-
º
1.5
2-
º
1.6
21.59
(19.465)
8.89
6.35
¶Dimensions in
The converter is in contact with the
slanted area of the P.C.B. To keep
isolation, adequate wiring on the
mounted side is required.
¶Div.: 0.1inch
[inch]
[0.25] [0.35]
[0.85]
[0.25]
[0.25]
[0.5]
[0.7]
mm
¶Weight: 10g or less.
¶Tolerance: ±0.5
¶Case material: Brass
¶Specification
at A part
¶Specification
at B part
Size between
case pins
27.5
8.89
11.43
21.59
(9.305)
(8.035)
(2.955)
+V
-V
+V
-V
2.5
18
4
6.35
(2.54)
17.78
7±0.3
IN OUT
6.35
(0.5)
2.7
2.5
COM
5- 1±0.1
1±0.1
0.4
0.4
º
Name plate
2-A
part
2-B
part
Performance data
MODEL ZUW30512 ZUW30515 ZUW31212 ZUW31215 ZUW32412 ZUW32415 ZUW34812 ZUW34815
MAX OUTPUT WATTAGE[W] 3.12 3.00 3.12 3.00 3.12 3.00 3.12 3.00
DC OUTPUT
VOLTAGE[V]
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.13 0.10 0.13 0.10 0.13 0.10 0.13 0.10
SPECIFICATIONS
MODEL ZUW30512 ZUW30515 ZUW31212 ZUW31215 ZUW32412 ZUW32415 ZUW34812 ZUW34815
INPUT
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 72
CURRENT[A]
*1
0.891typ 0.857typ 0.351typ 0.338typ 0.176typ 0.169typ 0.087typ 0.083typ
EFFICIENCY[%]
*1
70typ 70typ 74typ 74typ 74typ 74typ 75typ 75typ
OUTPUT
VOLTAGE[V] t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)
CURRENT[A] 0.13 0.10 0.13 0.10 0.13 0.10 0.13 0.10
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
*2
120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p]
*2
150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV]
-20 to +55C
150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV]
*3
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
Fixed
OUTPUT VOLTAGE SETTING[V]
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
ISOLATION
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
INPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
OUTPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-20 to +71C,20 - 95%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-40 to +85C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each X,Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1,EN60950-1,CSA C22.2 No.60950-1 Complies with IEC60950-1
OTHERS CASE SIZE/WEIGHT 35X7X23mm (WXHXD)/ 16g max
COOLING METHOD Convection
Output pins can be connected in series to make a 24V/30V output.
*1Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2Measured by 20MHz oscilloscope.
*3The drift is a change at 25Cof ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
*The output specification is at t12V and t15V.
*Series/Parallel operation with other model is not possible.
ZUW3
DC-DC Converters PCB Mount type
ZU W 3 12 12
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
R
12345
ZU/ZT
ZU/ZT-20
¡DERATING CURVE
¡RISE TIME & FALL TIME (ZUW30515:+15V)
¡OVERCURRENT CHARACTERISTICS (ZUW30515)
¡STATIC CHARACTERISTICS (ZUW30515)
ZU/ZT
ZU/ZT-21
ZUW3
External view
Outline
¶
Recomended size for
processing PCB
(TOP VIEW)
7.62
15.24
7.62
(0.3)
22.86
(1.25)
(1.25) (1.25)
(1.25) 5-
º
1.5
2-
º
1.6
29.21
16.51
6.35
¶Dimensions in
The converter is in contact with the
slanted area of the P.C.B. To keep
isolation, adequate wiring on the
mounted side is required.
¶Div.: 0.1inch
[inch]
[1.15]
[0.25] [0.65]
[0.6]
[0.9]
[0.3]
mm
¶Specification
at A part
¶Specification
at B part
Size between
case pins
¶Weight: 16g or less.
¶Tolerance: ±0.5
¶Case material: Brass
+V
-V IN OUT
+V
-V
35
23
(2.895)
(9.245) 16.51
29.21
22.86
7.62 7.62
(3.81)
2.5
47±0.3
COM
(0.5)
5- 1 ±0.1
2.7
2.5
1±0.1
0.4
0.4
Name plate
2-A
part
2-B
part
º
Performance data
MODEL ZUW60512 ZUW60515 ZUW61212 ZUW61215 ZUW62412 ZUW62415 ZUW64812 ZUW64815
MAX OUTPUT WATTAGE[W] 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00
DC OUTPUT
VOLTAGE[V]
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.25 0.20 0.25 0.20 0.25 0.20 0.25 0.20
SPECIFICATIONS
MODEL ZUW60512 ZUW60515 ZUW61212 ZUW61215 ZUW62412 ZUW62415 ZUW64812 ZUW64815
INPUT
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 72
CURRENT[A]
*1
1.60typ 1.60typ 0.65typ 0.65typ 0.33typ 0.33typ 0.17typ 0.17typ
EFFICIENCY[%]
*1
75typ 75typ 77typ 77typ 77typ 77typ 77typ 77typ
OUTPUT
VOLTAGE[V] t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)
CURRENT[A] 0.25 0.20 0.25 0.20 0.25 0.20 0.25 0.20
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
*2
120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p]
*2
150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV]
-20 to +55C
150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV]
*3
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
Fixed
OUTPUT VOLTAGE SETTING[V]
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
ISOLATION
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
INPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
OUTPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-20 to +71C,20 - 95%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-40 to +85C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each X,Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1,EN60950-1,CSA C22.2 No.60950-1 Complies with IEC60950-1
OTHERS CASE SIZE/WEIGHT 44.5X7X28mm (WXHXD)/ 25g max
COOLING METHOD Convection
Output pins can be connected in series to make a 24V/30V output.
*1Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2Measured by 20MHz oscilloscope.
*3The drift is a change at 25Cof ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
*The output specification is at t12V and t15V.
*Series/Parallel operation with other model is not possible.
ZUW6
DC-DC Converters PCB Mount type
ZU W 6 12 12
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
R
12345
ZU/ZT
ZU/ZT-22
¡DERATING CURVE
¡RISE TIME & FALL TIME (ZUW60515:+15V)
¡OVERCURRENT CHARACTERISTICS (ZUW60515)
¡STATIC CHARACTERISTICS (ZUW60515)
INPUT VOLTAGE V
OUTPUT VOLTAGE V
RIPPLE mVp-p
(+)Io=100%
(-)Io=100%
Ripple
OUTPUT
VOLTAGE
10
0
15
10
5
20
30
40
50
105
ZU/ZT
ZU/ZT-23
ZUW6
External view
Outline
¶
Recomended size for
processing PCB
(TOP VIEW)
15.24
20.32
10.16
27.94
(1.25)
(1.25) (1.25)
(1.25) 5-
º
1.5
2-
º
1.6
38.1
25.4
6.35
¶Dimensions in
The converter is in contact with the
slanted area of the P.C.B. To keep
isolation, adequate wiring on the
mounted side is required.
¶Div.: 0.1inch
[1.5]
[0.25] [1]
[0.8]
[0.4]
[1.1]
[0.6]
[inch]
mm
¶Specification
at A part
¶Specification
at B part
Size between
case pins
¶Weight: 25g or less.
¶Tolerance: ±0.5
¶Case material: Brass
+V
-V IN
OUT
+V
-V
44.5
(9.55)
(3.2) 38.1
25.4
47±0.3
(3.81) 15.24
27.94
2.5
10.16 10.16
COM
(0.5)
28
5- 1 ±0.1
2.7
2.5
1±0.1
0.4
0.4
Name plate
2-A
part
2-B
part
º
Performance data
MODEL
ZUW100512 ZUW100515 ZUW101212 ZUW101215 ZUW102412 ZUW102415 ZUW104812 ZUW104815
MAX OUTPUT WATTAGE[W] 8.4 9.0 10.8 10.5 10.8 10.5 10.8 10.5
DC OUTPUT
VOLTAGE[V]
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.35 0.30 0.45 0.35 0.45 0.35 0.45 0.35
SPECIFICATIONS
MODEL
ZUW100512 ZUW100515 ZUW101212 ZUW101215 ZUW102412 ZUW102415 ZUW104812 ZUW104815
INPUT
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 72
CURRENT[A]
*1
2.24typ 2.40typ 1.12typ 1.09typ 0.56typ 0.55typ 0.28typ 0.28typ
EFFICIENCY[%]
*1
75typ 75typ 81typ 81typ 81typ 81typ 81typ 81typ
OUTPUT
VOLTAGE[V] t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)
CURRENT[A] 0.35 0.30 0.45 0.35 0.45 0.35 0.45 0.35
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
*2
120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p]
*2
150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV]
-20 to +55C
150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV]
*3
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 20max (Minimum input,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
Fixed
OUTPUT VOLTAGE SETTING[V]
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
ISOLATION
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
INPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
OUTPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-20 to +71C,20 - 95%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-40 to +85C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each X,Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1,EN60950-1,CSA C22.2 No.60950-1 Complies with IEC60950-1
OTHERS CASE SIZE/WEIGHT 45X7X35mm (WXHXD)/ 40g max
COOLING METHOD Convection
Output pins can be connected in series to make a 24V/30V output.
*1Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2Measured by 20MHz oscilloscope.
*3The drift is a change at 25Cof ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
*The output specification is at t12V and t15V.
*Series/Parallel operation with other model is not possible.
ZUW10
DC-DC Converters PCB Mount type
ZU W 10 12 12
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
R
12345
ZU/ZT
ZU/ZT-24
¡DERATING CURVE
¡RISE TIME & FALL TIME (ZUW100515:+15V)
¡OVERCURRENT CHARACTERISTICS (ZUW100515)
¡STATIC CHARACTERISTICS (ZUW100515)
ZU/ZT
ZU/ZT-25
ZUW10
External view
¶
Recomended size for
processing PCB
Outline
¶Dimensions in
The converter is in contact with the
slanted area of the P.C.B. To keep
isolation, adequate wiring on the
mounted side is required.
¶Div.: 0.1inch
(TOP VIEW)
(1.25) (1.25)
(1.25) (1.25)
2-
º
1.6
20.32
6.35
5-
º
1.5
38.1
25.4
27.94
13.97
34.29
[inch]
[1.5]
[0.25] [1]
[1.1]
[0.55]
[1.35]
[0.8]
mm
¶Specification
at A part
¶Specification
at B part
Size between
case pins
¶Weight: 40g or less.
¶Tolerance: ±0.5
¶Case material: Brass
45
+V
-V
OUT
-V
+V
20.32
34.29
(3.18)
47±0.3
(3.45)
(9.8)
13.97 13.97
COM
IN
35
2.5
(0.5)
25.4
38.1 5- 1±0.1
2.7
2.5
1±0.1
0.4
0.4
Name plate
2-A
part
2-B
part
º
Performance data
MODEL
ZUW150512 ZUW150515 ZUW151212 ZUW151215 ZUW152412 ZUW152415 ZUW154812 ZUW154815
MAX OUTPUT WATTAGE[W] 14.4 15.0 15.6 15.0 15.6 15.0 15.6 15.0
DC OUTPUT
VOLTAGE[V]
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.6 0.5 0.65 0.5 0.65 0.5 0.65 0.5
SPECIFICATIONS
MODEL
ZUW150512 ZUW150515 ZUW151212 ZUW151215 ZUW152412 ZUW152415 ZUW154812 ZUW154815
INPUT
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 75
CURRENT[A]
*1
3.56typ 3.70typ 1.57typ 1.51typ 0.78typ 0.75typ 0.39typ 0.38typ
EFFICIENCY[%]
*1
81typ 81typ 83typ 83typ 83typ 83typ 83typ 83typ
OUTPUT
VOLTAGE[V] t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)
CURRENT[A] 0.60 0.50 0.65 0.50 0.65 0.50 0.65 0.50
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
*2
120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p]
*2
150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV]
0to+55
C
150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV]
*3
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 100max (Minimum input,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
Internally fixed (TRM pin open),t5% adjustable by external VR
OUTPUT VOLTAGE SETTING[V]
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
OVERVOLTAGE PROTECTION
Works at 115 - 140% of rating (Total of +V and -V)
REMOTE ON/OFF
Between RC and -side of input:short - 1.2V ---output ON,2.4V - 5.5V(or open)---output OFF,Compatible to TTL
ISOLATION
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
INPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
OUTPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-20 to +71C,20 - 95%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-40 to +85C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each X,Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1,EN60950-1,CSA C22.2 No.60950-1 Complies with IEC60950-1
OTHERS CASE SIZE/WEIGHT 45X8.5X50mm (WXHXD)/ 55g max
COOLING METHOD Convection
Output pins can be connected in series to make a 24V/30V output.
*1Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2Measured by 20MHz oscilloscope.
*3The drift is a change at 25Cof ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
*The output specification is at t12V and t15V.
*Series/Parallel operation with other model is not possible.
ZUW15
DC-DC Converters PCB Mount type
ZU W 15 12 12
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
R
12345
ZU/ZT
ZU/ZT-26
¡DERATING CURVE
¡RISE TIME & FALL TIME (ZUW151212:+12V)
¡OVERCURRENT CHARACTERISTICS (ZUW151212)
¡STATIC CHARACTERISTICS (ZUW151212)
ZU/ZT
ZU/ZT-27
ZUW15
External view
Outline
¶
Recomended size for
processing PCB
(TOP VIEW)
15.245.08
5.08 (5)
(5)
(5)
(5) (5)
(5)(5)
7-
º
1.5
35.56
¶Dimensions in
The converter is in contact with the
slanted area of the P.C.B. To keep
isolation, adequate wiring on the
mounted side is required.
¶Div.: 0.2inch
7.62
7.62
5.08
(5)
[1.4]
[0.6] [0.2]
[0.2] [0.3]
[0.3]
[0.2]
[inch]
mm
¶Weight: 55g or less.
note)Internal parts
¶Tolerance: ±0.5
¶Case material: Aluminum
45
IN OUT
50
(5) (5)
35.56
1
(4.72)
4 8.5±0.3
(5)(5)
1
(4.68) 5.08
5.08
15.24
(4.68) 5.08
+V
-V
TRM
+V
-V
RC
COM
7.62 7.62
7- 1±0.1
Name plate
note
º
Performance data
MODEL
ZUW250512 ZUW250515 ZUW251212 ZUW251215 ZUW252412 ZUW252415 ZUW254812 ZUW254815
MAX OUTPUT WATTAGE[W] 20.2 20.1 25.2 25.5 25.2 25.5 25.2 25.5
DC OUTPUT
VOLTAGE[V]
t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30
CURRENT[A]
0.84 0.67 1.05 0.85 1.05 0.85 1.05 0.85
SPECIFICATIONS
MODEL
ZUW250512 ZUW250515 ZUW251212 ZUW251215 ZUW252412 ZUW252415 ZUW254812 ZUW254815
INPUT
VOLTAGE[V] DC4.5 - 9 DC9 - 18 DC18 - 36 DC36 - 75
CURRENT[A]
*1
4.92typ 4.90typ 2.47typ 2.50typ 1.23typ 1.25typ 0.62typ 0.63typ
EFFICIENCY[%]
*1
82typ 82typ 85typ 85typ 85typ 85typ 85typ 85typ
OUTPUT
VOLTAGE[V] t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)t12 (+24)t15 (+30)
CURRENT[A] 0.84 0.67 1.05 0.85 1.05 0.85 1.05 0.85
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p]
*2
120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p]
*2
150max 150max 150max 150max 150max 150max 150max 150max
TEMPERATURE REGULATION[mV]
0to+55
C
150max 180max 150max 180max 150max 180max 150max 180max
DRIFT[mV]
*3
50max 60max 50max 60max 50max 60max 50max 60max
START-UP TIME[ms] 100max (Minimum input,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
Internally fixed (TRM pin open), t5% adjustable by external VR
OUTPUT VOLTAGE SETTING[V]
11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75
PROTECTION
CIRCUIT
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
OVERVOLTAGE PROTECTION
Works at 115 - 140% of rating (Total of +V and -V)
REMOTE ON/OFF
Between RC and -side of input:short - 1.2V ---output ON,2.4V - 5.5V(or open)---output OFF,Compatible to TTL
ISOLATION
INPUT-OUTPUT AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
INPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
OUTPUT-CASE AC500V 1minute,Cutoff current = 10mA,DC500V 50MWmin (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-20 to +71C,20 - 95%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-40 to +85C,20 - 95%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10 - 55Hz,98.0m/s2(10G), 3minutes period,60minutes each along X,Y and Z axis
IMPACT 490.3m/s2(50G), 11ms,once each X,Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1,EN60950-1,CSA C22.2 No.60950-1 Complies with IEC60950-1
OTHERS CASE SIZE/WEIGHT 65X8.5X50mm (WXHXD)/ 65g max
COOLING METHOD Convection
Output pins can be connected in series to make a 24V/30V output.
*1Rated input 5V, 12V, 24V or 48V DC, Io=100%.
*2Measured by 20MHz oscilloscope.
*3The drift is a change at 25Cof ambient temperature and 30 minutes - 8 hours after the input voltage applied at rated input/output.
*The output specification is at t12V and t15V.
*Series/Parallel operation with other model is not possible.
ZUW25
DC-DC Converters PCB Mount type
ZU W 25 12 12
Ordering information
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
R
12345
ZU/ZT
ZU/ZT-28
¡DERATING CURVE
¡RISE TIME & FALL TIME (ZUW251212:+12V)
¡OVERCURRENT CHARACTERISTICS (ZUW251212)
¡STATIC CHARACTERISTICS (ZUW251212)
ZU/ZT
ZU/ZT-29
ZUW25
External view
¶
Recomended size for
processing PCB
Outline
(TOP VIEW)
15.24
7.62
7.62
5.08
5.08
5.08
(5)
(5)
(5)
(5)
(5)
(5) (5)
(5)
7-
º
1.5
55.88
¶Dimensions in
The converter is in contact with the
slanted area of the P.C.B. To keep
isolation, adequate wiring on the
mounted side is required.
¶Div.: 0.2inch
[inch]
mm
[2.2]
[0.6] [0.2]
[0.2] [0.3]
[0.3]
[0.2]
¶Weight: 65g or less.
note)Internal parts
¶Tolerance: ±0.5
¶Case material: Aluminum
IN OUT
50
(5) (5)
1
4 8.5±0.3
(5)(5)
1
(4.68)
5.08
5.08
15.24
(4.68) 5.08
+V
-V
TRM
+V
-V
RC
65
55.88
(4.56)
7.62
7.62
COM
7- 1±0.1
Name plate
note note
º
Performance data
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cosel:
ZUW64815 ZUW30512 ZUW62415-G ZUW1R51212 ZUW101212 ZUW34812-A ZUW250515 ZUW252412
ZUW31212-G ZUW61215 ZUW152415 ZUW1R52412-G ZUW32412-G ZUW104815 ZUW62415 ZUW34812
ZUW254815-A ZUW151212 ZUW60512 ZUW251215 ZUW1R50515 ZUW152412-G ZUW31212 ZUW100515
ZUW61212 ZUW1R54815-A ZUW31215 ZUW1R51215 ZUW60515 ZUW252412-G ZUW64812-A ZUW152412
ZUW32415 ZUW1R54812 ZUW252415 ZUW154812-A ZUW30515 ZUW1R52415 ZUW151215 ZUW250512
ZUW154815 ZUW32412 ZUW104812-A ZUW1R50512-A ZUW64812 ZUW154812 ZUW104812 ZUW1R54815
ZUW62412 ZUW150512 ZUW60512-A ZUW102415 ZUW254812 ZUW1R54812-A ZUW1R52412 ZUW102412
ZUW100512 ZUW34815 ZUW32415-G ZUW150515 ZUW254815 ZUW62412-G ZUW101215 ZUW251212
ZUW254812-A ZUW1R50512
