LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110 W AC/DC Universal Input Switch Mode Power Supplies 1
2 YEAR WARRANTY
NLP110 Series
Single and triple output
•Provides low voltage outputs
•Compliance to EN61000-3-2 (Power Factor = 0.98)
•Smallest industry standard package 6.5 x 3.0 x 1.26 inches
•90 Vac to 264 Vac universal input range
•UL, CSA and VDE safety approvals and CE-Marked to LVD
•Overvoltage and short circuit protection
•VDE0871-B, EN55022-B, EN55011-B conducted noise
•VDE0871-A, EN55022-A, EN55011-A radiated noise
•Meets all applicable and relevant immunity standards
EN61000-4-2, 4, 5 and 6
•Available RoHS compliant
The NLP110 is a series of 110 W ac-dc open frame power supplies in a 3 x 6.5 x 1.26 inch package.
The NLP110 is power factor corrected to meet EN61000-3-2 and is available in single and multiple
output models. The multiple output models have a capability that is unique to the power supply market
- they can deliver equal amounts of current on multiple low voltage outputs to support designs that will
span the industry transition from 5 V logic to 3.3 V logic. The NLP110 is practically the same size as a
65 Watt 3 x 5 inch product, e.g. NLP65 - the one difference is that the footprint is a mere 1.5 inches
longer. The NLP110 is primarily designed for networking applications in 1U shelves or boxes that have
a heavy logic content such as access concentrators, midrange routers, LAN switches and shared
media hubs. The availability of single output models with high peak load capability also means that the
NLP110 can provide a power factor corrected solution for applications currently using the NFS110.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
EMC CHARACTERISTICS (continued)
Surge EN61000-4-5 Level 3
Fast transients EN61000-4-4 Level 3
Radiated immunity EN61000-4-3 Level 3
Conducted immunity EN61000-4-6 Level 3
GENERAL SPECIFICATIONS
Hold-up time 120 Vac, 60 Hz 16.7 ms @ 110 W
Efficiency 120 Vac, 80 W (-9605J) 75% min.
Isolation voltage Input/output 3000 Vac
Input/chassis 1500 Vac
Approvals and EN60950, VDE0805, IEC950,
standards pending UL1950, CSA C22.2 No. 950,
Weight 283 g (10 oz)
MTBF (@ 25 °C) MIL-HDBK-217F 220,000 hours min.
ENVIRONMENTAL SPECIFICATIONS (9)
Thermal performance Operating ambient, 0 °C to +50 °C
(See derating curve)
Non-operating -40 °C to +85 °C
50 °C to 70 °C, ambient, Derate to
convection cooled 50% load
0 °C to 50 °C, ambient, 80 W
convection cooled
0 °C to 50 °C ambient, 110 W
150 LFM forced air
Peak (0 °C to +50 °C, 60 s) (See Note 3)
Relative humidity Non-condensing 5% to 95% RH
Altitude Operating 10,000 feet max.
Non-operating 30,000 feet max.
Vibration (See Note 8) 5-500 Hz 2.4 G rms peak
Shock per MIL-STD-810E 516.4 Part IV
OUTPUT SPECIFICATIONS
Total regulation Main output ±2.0%
(Line and load) Auxiliary outputs ±5.0%
Rise time At turn-on 1.0 s, max.
Transient response Main output 5.0% or 250 mV
75% to 100% max. dev., 1 ms max.
step at 0.1 A/µs recovery to 1%
Temperature coefficient ±0.02%/°C
Overvoltage protection Main outputs 125%, ±10%
Short circuit protection Cyclic operation Continuous
Minimum output current Single and multiple See table
INPUT SPECIFICATIONS
Input voltage range Universal input 90-264 Vac
(See Note 6)
Input frequency range 47-63 Hz
Input surge current 120 Vac 18 A max.
(cold start) 230 Vac 35 A max.
Safety ground 120 Vac, 60 Hz 0.45 mA
leakage current 230 Vac, 50 Hz 0.75 mA
Input current 120 Vac @ 80 W 0.9 A rms
120 Vac @ 110 W 1.3 A rms
230 Vac @ 80 W 0.48 A rms
230 Vac @ 110 W 0.7 A rms
Input fuse UL/IEC127 F3.15A H, 250 Vac
EMC CHARACTERISTICS (12)
Conducted emissions EN55022, FCC part 15 Level B
Radiated emissions EN55022, FCC part 15 Level A
Harmonic current EN61000-3-2 Compliant
emission correction
ESD air EN61000-4-2 Level 3
ESD contact EN61000-4-2 Level 3
SPECIFICATIONS
File Name: nlp110.pdf Rev (02): 08 Nov 2005
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
Notes
1Free air convection.
Multiple output units: maximum continuous output power not to exceed
80 W.
For -9693J; I3.3 V = 13 A max.; I5.0 V = 13 A max.; I3.3 V +I
5.0 V ≤16 A.
For -9694J; I3.3 V = 13 A max.; I2.5 V = 13 A max.; I3.3 V +I
2.5 V ≤16 A
For -9695J; I3.3 V = 13 A max.; I12 V = 6.5 A max.; I3.3 V +I
12 V ≤16 A.
For -9608J; I5.0 V = 13 A max.; I12 V = 6.5 A max.; I5.0 V +I
12 V ≤16 A.
Single output units: maximum continuous output power not to exceed; 75
W on –9605J; 76.8 W on –9612J,-9624J, and –9617J.
2150 LFM forced air cooling from L4 side.
Multiple output units: maximum continuous output power not to exceed
105 W.
For -9693J; I3.3 V = 16 A max.; I5.0 V = 16 A max.; I3.3 V +I
5.0 V ≤20 A.
For -9694J; I3.3 V = 16 A max.; I2.5 V = 16 A max.; I3.3 V +I
2.5 V ≤20 A
For -9695J; I3.3 V = 16 A max.; I12 V = 8.5 A max.; I3.3 V +I
12 V ≤20 A.
For -9608J; I5.0 V = 16 A max.; I12 V = 8.5 A max.; I5.0 V +I
12 V ≤20 A.
Single output units: maximum continuous output power not to exceed
110 W for all models.
3300 LFM forced air cooling from L4 side.
Multiple output units: maximum continuous output power not to exceed
110 W.
For -9693J; I3.3 V = 20 A max.; I5.0 V = 18 A max.; I3.3 V +I
5.0 V ≤22 A.
For -9694J; I3.3 V = 20 A max.; I2.5 V = 20 A max.; I3.3 V +I
2.5 V ≤22 A
For -9695J; I3.3 V = 20 A max.; I12 V = 8.5 A max.; I3.3 V +I
12 V ≤22 A.
For -9608J; I5.0 V = 20 A max.; I12 V = 8.5 A max.; I5.0 V +I
12 V ≤22 A.
Single output units: maximum continuous output power not to exceed
110 W for all models.
4Peak output current lasting less than 30 seconds with duty cycle less
than 5%. During peak loading, output voltage may exceed total
regulation limits.
5Figure is peak-to-peak for convection power rating. Output noise
measurements are made across a 20 MHz bandwidth using a 6” twisted
pair, terminated with a 10 µF electrolytic capacitor and a 0.1 µF ceramic
capacitor.
6Minimum load required for correct start-up and operation on single
outputs and on main output of multiple versions. Failure to observe
minimum load on main output will not allow the supply to start-up
correctly. Some electronic test loads have a large delay time before they
start drawing current even though the voltage from the supply is present.
During this time delay, there is no load on the output and as a result, the
supply cannot start-up properly and maintain its correct output voltage.
In these instances, a dummy resistive load across the output may be
necessary to load the output of the supply until the test load can function
correctly and draw the intended minimum load. Minimum load required
on auxiliary outputs to maintain regulation.
N
7For models NLP110-9608J and NLP110-9695J, the 12 V output is
floating. For -12 V output, pin 11 on J2 has to be connected to Return
making pin 12 the -12 V output
8Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G
rms 5 Hz to 500 Hz.
9For optimum reliability, no part of the heatsink should exceed 110 ºC,
and no semiconductor case temperature should exceed 120 ºC.
10 CAUTION: Allow a minimum of 1 second after disconnecting line power
when making thermal measurements.
11 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
12 The EMI specifications reference measurements made with the power
supply mounted on a grounded metal sheet extending 1 inch beyond
each edge, using an unshielded cable. No external filtering required
during conducted emissions testing but some applications may require
additional filtering to achieve system compliance. A line choke, (ac input
cords looped twice through an EMI suppression toroid) was used during
radiated emissions testing. Considerable radiated testing in 1U six-sided
boxes has shown that units can meet level B in typical systems.
Application support is available from the factory to assist with EMI
compliance.
13 All models require a minimum mounting stand-off of 6.35 mm (0.25
inches) in the end use product.
14 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
15 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
NLP110 Series
Single and triple output
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110 W AC/DC Universal Input Switch Mode Power Supplies 2
File Name: nlp110.pdf Rev (02): 08 Nov 2005
OUTPUT OUTPUT CURRENT
RIPPLE (5) TOTAL MODEL
VOLTAGE MIN (6) MAX (1) 150 LFM (2) 300 LFM (3)
PEAK (4)
REGULATION NUMBERS (7,14,15)
+5 V 0.5 A 15 A 22 A 22 A 22 A 50 mV ±2.0% NLP110-9605J
+12 V 0.3 A 6.4 A 9.2 A 9.2 A 11.5 A 120 mV ±2.0% NLP110-9612J
+48 V 0 A 1.6 A 2.3 A 2.3 A 2.5 A 240 mV ±2.0% NLP110-9617J
+24 V 0.2 A 3.2 A 4.6 A 4.6 A 6.0 A 240 mV ±2.0% NLP110-9624J
+5 V (A) 0.5 A 13 A 16 A 18 A 18 A 50 mV ±2.0% NLP110-9693J
+3.3 V (B) 0.2 A 13 A 16 A 20 A 20 A 50 mV ±2.0%
+12 V 0 A 0.65 A 1.0 A 1 A 1 A 120 mV ±5.0%
+3.3 V (A) 0.5 A 13 A 16 A 20 A 22 A 50 mV ±2.0% NLP110-9694J
+2.5 V (B) 0.1 A 13 A 16 A 20 A 22 A 50 mV ±2.0%
+12 V 0 A 0.65 A 1 A 1 A 1 A 120 mV ±5.0%
+12 V (A) 0.2 A 6.5 A 8.5 A 8.5 A 10 A 1200 mV ±2.0% NLP110-9695J
+3.3 V (B) 0.5 A 13 A 16 A 20 A 22 A 50 mV ±2.0%
-12 V 0 A 0.65 A 1 A 1 A 1 A 120 mV ±5.0%
+12 V (A) 0.2 A 6.5 A 8.5 A 8.5 A 10 A 120 mV ±2.0% NLP110-9608J
+5 V (B) 0.2 A 13 A 16 A 18 A 22 A 50 mV ±2.0%
-12 V 0 A 0.65 A 1 A 1 A 1 A 120 mV ±5.0%
DERATING CURVE
Output Power (Watts)
0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C
40W
80W
110W 150 LFM FORCED
AIR COOLING
55W
NATURAL
CONVECTION
COOLING
Input and output connectors Mating connectors
AC (J1) connector type AC (J1) mating connector type
Molex 26-60-4030 or equivalent. Molex 09-50-3031 or equivalent with Molex
08-50-0105 or equivalent crimp terminals.
DC (J2) connector type DC (J2) mating connector type
12 position Molex Spox type 26-48-1125 Molex Spox type 26-03-3121 and
or equivalent. contact 08-52-0113.
Sense (J3) connector type Sense (J3) mating connector type
Molex 22-23-2021 or equivalent. Molex 22-01-3027 and contact
08-50-0113.
Earth (J4) connector type Earth (J4) mating connector type
Male 0.250 quick disconnect. Molex 90028.
Sense (J5) connector type Sense (J5) mating connector type
Leoco 2421P02H000. Leoco 2420S020000 and contact
2453TPB00V1.
0.23
(5.842)
6.50
(165.10)
3T1 (REF.)
J4
J1
6.050
(153.670)
2.550
(64.770)
ALL DIMENSIONS IN INCHES (mm)
J2
J3
1
1
2
12
3.00
(76.20)
F1
J5 2
10.23
(5.842)
!
1
MAXIMUM COMPONENT
HEIGHT IS 1.26 (32.00)
OUTPUT PIN CONNECTIONS
J2 SINGLE TRIPLE
Pin 1 No Connection V (B)
Pin 2 No Connection V (B)
Pin 3 No Connection V (B)
Pin 4 Return Return
Pin 5 Return Return
Pin 6 Return Return
Pin 7 Return Return
Pin 8 V (A) V (A)
Pin 9 V (A) V (A)
Pin 10 V (A) V (A)
Pin 11 No Connection V (C)
Pin 12 No Connection V (C) Return (7)
Recommended direction
for forced air relative to
power supply orientation
shown below.
1Optimum.
2Very good.
3Good.
4Not recommended.
2
34
1
INPUT
PIN CONNECTIONS
J1
Pin 1 AC Neutral
Pin 2 No Connection
Pin 3 AC Line
J3
Pin 1 V (A) Sense +
Pin 2 V (A) Sense -
J4
Pin 1 Safety Earth
J5
Pin 1 V (B) Sense +
Pin 2 V (B) Sense -
Datasheet © Artesyn Technologies
®
2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NLP110 Series
Single and triple output
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110 W AC/DC Universal Input Switch Mode Power Supplies 3
www.artesyn.com
File Name: nlp110.pdf Rev (02): 08 Nov 2005
Mechanical Notes
AAll dimensions are in inches (mm).
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 10401-3336-1096.
UL1950 File No. E136005.
CSA C22.2 No. 950 File No. LR41062C.
