FJH1101 Information Only Data Sheet FINAL REVERSE CURRENT & FORWARD VOLTAGE LIMITS MIGHT BE INCREASED SLIGHTLY General Description: An Ultra Low Leakage Diode in the DO-35 package. The forward voltage is typically greater than 0.5 volts at 1.0 micro-ampere. This product is light sensitive, any damage to the body coating will affect the reverse leakage when exposed to light. Ultra Low Leakage Diode Absolute Maximum Ratings* Sym TA = 25OC unless otherwise noted Parameter Tstg Storage Temperature TJ Operating Junction Temperature PD Total Power Dissipation at TA = 25OC Linear Derating Factor from TA = 25OC Value Units -55 to +200 OC 175 OC 250 mW 1.67 mW/OC 300 OC/W R OJA Thermal Resistance Junction-to-Ambient Wiv Working Inverse Voltage 15 V IF DC Forward Current (IF) 150 mA *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired Typical Forward Voltages CATHODE BAND 0.500 Minimum 12.70 Typ 1.000 LOGO FJH 11 01 0.022 (0.558) Diameter 0.018 (0.458) Typ 20 mils 0.090 (2.28) Diameter 0.060 (1.53) 0.200 (5.08) 0.120 (3.05) Electrical Characteristics SYM TA = 25OC unless otherwise noted CHARACTERISTICS BV Breakdown Voltage IR Reverse Leakage VF Forward Voltage CT Diode Capacitance (c) 1999 Fairchild Semiconductor Corporation 1.0 uA - - - - - - - - - - 530 mV 10 uA - - - - - - - - - - 605 mV 100 uA - - - - - - - - - - 685 mV 1.0 mA- - - - - - - - - - 780 mV 10 mA- - - - - - - - - - 895 mV 50 mA- - - - - - - - - - 995 mV 100 mA- - - - - - - - - - 1.07 V MIN MAX 20 UNITS TEST CONDITIONS V IR = 5.0 15 pA pA VR = VR = 5.0 V 15 V 1.10 V IF 50 mA 2.0 pF VR = = 5.0 uA 0 V, f = 1.0 MHz FJH1101 - Rev. A DO-35 Tape and Reel Data DO-35 Packaging Configuration: Figure 1.0 Soabar Label Corrugated Outer Liner White (Anode) Red/Blue (Cathode) T50R TNR Options Kraft Paper Wound Between Layers DO-35 Packaging Information Table: Figure 2.0 DO-35 Packaging Information Soabar Label sample Packaging Option T50R T50A Packaging type TNR Ammo Standard (no flow code) Bag 10,000 5,000 500 13 - - TYPE IN5225A MARK 52 - REV A2 PART No. Qty per Reel/Tube/Bag Reel Size (inch diameter) Inside Tape Spacing (mm) Int Box Dimension (mm) 52 P.O. No. PKG 254x79x794 406x267x184 279x133x108 Max qty per Box 30,000 50,000 5,000 QTY Weight per unit (gm) 0.137 0.137 0.137 Q.C. Weight per Reel/Ammo (kg) 2.23 0.800 Note/Comments BLK-BRN EC No. 10,000 M.O. No. OX5046F035 DATE D9903 MFD. UNDER US PAT 3.025.589 & OTHER US PATS & APPLICATIONS Bulk DO-35 Reel Dimensions: Figure 3.0 Soabar Label REEL DIMENSIONS ITEM DESCRIPTION SYMBOL MINIMUM MAXIMUM Reel Diameter D1 10.375 10.625 Arbor Hole Diameter (Standard) D2 1.245 1.255 Core Diameter D3 3.190 3.310 Flange to Flange Inner Width W1 D1 D2 3.400 Note: All Dimensions are in inches W1 D3 (c)2000 Fairchild Semiconductor International September 1999, Rev. A DO-35 Tape and Ammo Data, continued DO-35 Ammo Packing Configuration: Figure 4.0 Soabar Label (on top of box) 254mm x 79mm x 79mm Intermediate Container (5,000 cap) T50A Option DO-35 Taping Dimension: Figure 5.0 H TAPING DIMENSIONS G L1 F B L2 E C A INCH MM MILS NOTES A 2.520 +0.066/ -0.027 64.00 +1.69/ -0.69 2519 +66.5/ -27.0 Overall width B 2.0470.027 52 0.69 204727 Inside Tape Spacing C 0.200 0.0157 5.08 0.40 200 15.7 Component Pitch D 0.047(max) 1.2(max) 47(max) Component Misalignment E 0.022(max) 0.55(max) 22(max) Tape Mismatch F 0.027(max) 0.69 27 Units in line w/ one another G 0.126(min) 3.2(min) 126(min) Lead amount between tapes H 0 0 0 Lead amount beyond tapes L1-L2 0.027 0.69 27 Delta between two leads D DO-35 Bulk Packing Configuration: Figure 6.0 102mm x 76mm x 127mm Immediate Box (1,000 cap) 133mm x 95mm Anti-static bag (500/bag) September 1999, Rev. A DO-35 Package Dimensions DO-35 (FS PKG Code D2) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in millimeters Part Weight per unit (gram): 0.137 (c)2000 Fairchild Semiconductor International March 2000, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET VCXTM STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H3