128383-HMC916LP3E - ANALOG DEVICES

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

FREQ. MULTIPLIERS - ACTIVE - SMT

5 - 1

HMC916LP3E

SMT MMIC x3 ACTIVE

FREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT

v00.0410

General Description

Features

Functional Diagram

Output Power: 2 dBm

Spurious Suppression: >15 dBc

SSB Phase Noise: -152 dBc/Hz @ 100 kHz Offset

Single Supply: +5V @ 83 mA

16 Lead 3x3 mm SMT Package: 9 mm

Electrical Specications, TA = +25° C, Vcc= 5V [1]

Typical Applications

The HMC916LP3E is Ideal for:

• Microwave Radio & VSAT

• Military Radios, Radar & ECM

• Test Instrumentation

The HMC916LP3E is an active x3 frequency mult-

iplier in a 3x3 mm leadless QFN surface mount

package. Power output is 2 dBm typical from a

single +5V supply and varies little vs. input power,

temperature and supply voltage. Suppression of

undesired fundamental and spurious is 15 dBc

typical with respect to output signal level. The low

additive SSB phase noise of -152 dBc/Hz at 100 kHz

offset helps the user maintain good system noise

performance. The HMC916LP3E is ideal for use in LO

multiplier chains allowing reduced parts count versus

traditional approaches.

Parameter Min. Typ. Max. Units

Frequency Range, Input 2.66 - 5.33 GHz

Frequency Range, Output 8 - 16 GHz

Input Power Range 0 5 10 dBm

Output power Range 2 dBm

Spurious -15 dBc

Input Return Loss 13 dB

Output Return Loss 15 dB

SSB Phase Noise (100 kHz offset) Pin = +5 dBm -152 dBc/Hz

Supply Current (Icc) 83 mA

[1] All data shown is single ended operation.

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

FREQ. MULTIPLIERS - ACTIVE - SMT

5 - 2

Output Power vs.

Temperature @ 0 dBm Drive Level [1]

Output Power vs.

Supply Voltage @ 0 dBm Drive Level [1]

Spurious Output vs. Fin

Pin = +5 dBm [1]

Output Power vs. Drive Level [1]

Output Return Loss vs. Temperature [1]

Input Return Loss vs. Temperature [1]

HMC916LP3E

v00.0410

SMT MMIC x3 ACTIVE

FREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT

-6

-4

-2

7 8 9 10 11 12 13 14 15 16 17

+25C

+85C

-40C

OUTPUT POWER (dBm)

OUTPUT FREQUENCY (GHz)

-6

-4

-2

7 8 9 10 11 12 13 14 15 16 17

0 dBm

+ 5 dBm

+ 10 dBm

OUTPUT POWER (dBm)

OUTPUT FREQUENCY (GHz)

-6

-4

-2

7 8 9 10 11 12 13 14 15 16 17

4.75V

5.0V

5.25V

OUTPUT POWER (dBm)

OUTPUT FREQUENCY (GHz)

-80

-70

-60

-50

-40

-30

-20

-10

2.5 3 3.5 4 4.5 5 5.5

1rst Harmonic

2nd Harmonic

3rd Harmonic

4th Harmonic

5th Harmonic

6th Harmonic

OUTPUT LEVEL (dBm)

INPUT FREQUENCY (GHz)

-20

-15

-10

-5

2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0

+25C

+85C

-40C

RETURN LOSS (dB)

FREQUENCY (GHz)

-35

-30

-25

-20

-15

-10

-5

7 8 9 10 11 12 13 14 15 16 17

+25C

+85C

-40C

RETURN LOSS (dB)

FREQUENCY (GHz)

[1] All data shown is single ended operation.

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

FREQ. MULTIPLIERS - ACTIVE - SMT

5 - 3

SSB Phase Noise vs. Pin

Fout = 12 GHz, T = 25 °C [1]

Absolute Maximum Ratings

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

HMC916LP3E

v00.0410

SMT MMIC x3 ACTIVE

FREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT

RF Input (Vcc = +5V) +20 dBm

Vcc +6.0V

Storage Temperature -65 to +150 °C

ESD Sensitivity (HBM) 100V

Icc vs. Temperature [1]

Junction Temperature To Maintain

1 Million Hour MTTF 150 °C

Nominal Junction Temperature

(T = 85 °C) 101.4 °C

Thermal Resistance

(Junction to GND paddle, 5V supply) 39.5 °C/W

Operating Temperature -40 °C to + 85 °C

Reliability Information

[1] All data shown is single ended operation.

-160

-150

-140

-130

-120

1.0e+2 1.0e+3 1.0e+4 1.0e+5 1.0e+6 1.0e+7

0 dBm

5 dBm

10 dBm

SSB PHASE NOISE (dBc/Hz)

OFFSET FREQUENCY (Hz)

4.7 4.8 4.9 5 5.1 5.2 5.3

+25C

+85C

-40C

OPERATING CURRENT (mA)

Vcc (V)

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

FREQ. MULTIPLIERS - ACTIVE - SMT

5 - 4

Outline Drawing

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE

SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED

LAND PATTERN.

Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]

HMC916LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 916

XXXX

[1] 4-Digit lot number XXXX

[2] Max peak reow temperature of 260 °C

Package Information

HMC916LP3E

v00.0410

SMT MMIC x3 ACTIVE

FREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

FREQ. MULTIPLIERS - ACTIVE - SMT

5 - 5

Pin Description

HMC916LP3E

v00.0410

SMT MMIC x3 ACTIVE

FREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT

Pin Number Function Description Interface Schematic

1, 4 - 9, 12,

13, 15, 16 GND These pins and exposed paddle must

be connected to RF/DC ground.

2RFNIN

(or GND)

This pin is AC coupled and matched to 50 ohms, and

is 180° out of phase with pin 3 for differential opera-

tion. RF/DC ground for single ended operation.

3 RFIN This pin is AC coupled and matched to 50 ohms

10 RFOUT This pin is AC coupled and matched to 50 ohms

11 RFNOUT

This pin is AC coupled and matched to 50 ohms, and

is 180° out of phase with pin 10 for differential opera-

tion. Terminate in 50 ohms for single ended operation.

14 Vcc Supply voltage +5V

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

FREQ. MULTIPLIERS - ACTIVE - SMT

5 - 6

Evaluation PCB

Item Description

J1 - J3 PCB Mount SMA Connector

J4, J5 DC Pin

C1 100 pF Capacitor, 0402 Pkg.

C2 1000 pF Capacitor, 0402 Pkg.

C3 4.7 µF Capacitor, 0402 Pkg.

U1 HMC916LP3E x3 Active Multiplier

PCB [2] 128702 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

The circuit board used in the application should

be generated with proper RF circuit design tech-

niques. Signal lines should have 50 Ohm imped-

ance while the package ground leads and exposed

paddle should be connected directly to the ground

plane similar to that shown. The evaluation circuit

board shown is available from Hittite upon request.

List of Materials for Evaluation PCB 128383 [1]

HMC916LP3E

v00.0410

SMT MMIC x3 ACTIVE

FREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D