1812DPS Coupled Inductors
Document 248-1
Document 248-1 Revised 10/12/15
L DCR SRF
±20%2 Q max min Isat4 Irms5
Part number1 (µH)
min3 (Ohms) (MHz) (mA) (mA)
1812DPS-102ML_ 1.0 38 0.20 285 2400 2100
1812DPS-222ML_ 2.2 29 0.33 175 1500 1200
1812DPS-472ML_ 4.7 43 0.41 102 1500 1000
1812DPS-103ML_ 10 35 0.74 74 800 780
1812DPS-153ML_ 15 37 0.96 65 700 710
1812DPS-223ML_ 22 38 1.84 54 500 530
1812DPS-393ML_ 39 39 2.60 5.7 450 420
1812DPS-473ML_ 47 40 2.66 4.8 400 390
1. When ordering, please specify packaging code:
1812DPS-473MLC
Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic
tape (600 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13 machine-ready reel. EIA-481 embossed plastic
tape (2200 parts per full reel).
2. Per winding. Tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. Q measured at 1 MHz.
4. DC current at which the inductance drops 10% (typ) from its value
without current.
5. Current that causes a 40°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute maxi-
mum ratings.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Ferrite
Terminations RoHS compliant gold over nickel over moly-manganese.
Weight 0.30 – 0.36 g
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +125°C (ambient + temp rise)
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 600/7reel; 2200/13 reel Plastic tape: 12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 3.9 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Coupled inductor optimized for xDSL filtering applications
Can be used as a common mode choke, 1:1 transformer or
in SEPIC applications
A B C D E F G
max max max ref ref ref min H
0.231 0.196 0.150 0.107 0.100 0.178 0.04 0.03 inches
5,87 4,98 3,81 2,72 2,54 4,52 1,02 0,76 mm
2
14
3
41
A
B
E
H
G
F
C
D
0.048
1,22
0.015
0,38
0.115
2,92
0.018
0,46
0.020
0,51
0.057
1,45
Recommended
Land Pattern
0.015
0,38 ref
0.040
1,02
0.020
0,51
min
0.030 ±0.002
0,76 ±0,05
PadDetail
41
3
2
Document 248-2
Document 248-2 Revised 10/12/15
1812DPS Coupled Inductors
Typical L vs Frequency Typical Q vs Frequency
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Coilcraft:
1812DPS-223MLC 1812DPS-103MLC 1812DPS-153MLC 1812DPS-472MLB 1812DPS-102MLB 1812DPS-
393MLB 1812DPS-222MLC 1812DPS-223MLB 1812DPS-153MLB 1812DPS-222MLB 1812DPS-393MLC
1812DPS-473MLB 1812DPS-103MLB 1812DPS-102MLC 1812DPS-472MLC 1812DPS-473MLC