SONG CHUAN
167
731 731
Note :
(1) Initial value. Operate and release time excluding contact bounce.
(2) Unless otherwise specified, all tests are under room temperature and humidity.
(3) Consider the heat of PCB is necessary, please check the actual condition of PCB.
(4) Applying no diode to this relay. The life expectancy will be lower when a diode is used. To use
a varistor (ZNR) could absorb the coil surge of relay that is recommended.
(5) Do not use the relay exceeding the coil rating, contact rating and life expectancy, or this may cause
the risk of overheating.
(6) To assure optimum performance, avoid the relay from dropping, hitting, or other unnecessary shocks.
(7) Use suitable harnesses and bus bars according to the current as below︰
10A type︰Min. 2.0 mm
25A type︰Min. 6.0 mm
(8) Usage, transport and storage conditions
● 1. Temperature: -45~+70°C
● 2. Humidity: 5 to 85% R.H.
● 3. Pressure: 86 to 106 kPa
● Furthermore, the humidity range varies with the temperature. So, use relays
within the range indicated in the graph below.
(9) Please contact Song Chuan for the detailed information.
2
2
Tolerance range
Humidity, %RH
(Avoid freezing
when used at
temperatures
lower than 0°C)
(Avoid
condensation
when used at
temperatures
higher than 0°C )
Temperature, °C
Insulation Data
Insulation of IEC 61810-1
Clearance / creepage distances Between coil to contact : Reinforce
,
≧ 3.0mm / ≧ 5.0mm
: Functional
Between open contact
Rated insulation voltage 250V
Rated impulse withstand voltage 2500V
Pollution degree 2
Rated voltage 230 / 400V
Overvoltage category II
Note;(1) Initial value.
Insulation resistance (1) 1000 MΩ Min. (DC 500V)
Between open contact : AC 500V , 50/60Hz 1 min. (for 731)
: AC 1000V , 50/60Hz 1 min. (for 731H)
Between contact and coil : AC 1500V , 50/60Hz 1 min. (for 731)
Dielectric strength (1)
: AC 2500V , 50/60Hz 1 min. (for 731H)
Between contact circuits : AC 1500V , 50/60Hz 1 min. (for 731)
: AC 2500V , 50/60Hz 1 min. (for 731H)