XTL1011 * Surface Mount Seam-Weld Package * Good Frequency Stability over Temperature * Excellent Reliability * Complies with Directive 2002/95/EC (RoHS) 26.00000 MHz Crystal Unit 2 > The XTL1011 is a surface mount 3.2 x 2.5 mm crystal unit for use in wireless telecommunications devices, especially where an ultra-miniature package is needed for mobility. SM3225-4 Case Electrical Characteristics Characteristic Sym Notes Minimum Typical Nominal Frequency 26.00000 Mode of Oscillation Fundamental Maximum Units MHz Storage Temperature Range -40 +85 C Operating Temperature Range -20 +75 C Frequency Stability over Operating Temperature Range 30 ppm (referred to the value at 25C) FL Frequency Make Tolerance Equivalent Series Resistance 30 ppm @ 25C 3C ESR 80 Nominal Drive Level 10 Shunt Capacitance CO Load Capacitance CL 3.0 9 Insulation Resistance uW pF pF 500 M min @ 100 VDC Stanard Shipping Quantity on 178 mm (7") Reel 3000 Lid Symbolization (in addition to Lot and/or Date Codes) units 1011 YWWS C r y s ta l E q u iv a le n t C ir c u it 2 C E S R 4 O CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. The design, manufacturing process, and specifications of this device are subject to change without notice. www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 1 of 3 XTL1011 - 2/3/10 SM3225-4 Case 4-Terminal Surface-Mount Seam Weld Case 3.2 x 2.5 mm Nominal Footprint Pin Connection 1 GND 2 IN/OUT 3 GND 4 IN/OUT Internal Connections (Top View) www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Land Pattern (unit: mm) Page 2 of 3 XTL1011 - 2/3/10 Reel Dimensions Tape Dimensions www.RFM.com E-mail: info@rfm.com (c)2009-2010 by RF Monolithics, Inc. Page 3 of 3 XTL1011 - 2/3/10