Low-voltage operation photo IC S7610-10 High reliability photo IC operable at 2.2 V S7610-10 is a photo IC comprised of a photodiode, amplifier, schmitt trigger circuit and output transistor, all integrated onto a single chip and molded with clear resin into a miniature package. An optical encoder resistant to tough environmental conditions can be configured by combining S7610-10 with infrared LED L6895-10 (made by Hamamatsu). Features Applications Pd plated leads Rotary encoders, etc. Miniature package with lens Open collector output "L" level output at light input Absolute maximum ratings (Ta=25 C) Parameter Symbol Value Supply voltage Vcc -0.5 to +7 Output voltage Vo -0.5 to +7 Low level output current Io 8 Power dissipation P 250 Operating temperature Topr -30 to +85 Storage temperature Tstg -40 to +90 Soldering 260 C, 3 s, at least 2.5 mm away from package surface Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to product within the absolute maximum ratings. Unit V V mA mW C C use the Electrical and optical characteristics (Ta=25 C, Vcc=5 V, unless otherwise noted, light source: p=890 nm LED) Parameter Supply voltage Low level output voltage High level output current Current consumption HL threshold illuminance Hysterisis Symbol Vcc VOL IOH Icc EHL Hys LH propagation delay time tPLH HL propagation delay time tPHL Peak sensitivity wavelength p Rise time tr Fall time tf Condition IOL=4 mA, E=0.4 W/mm2 E=0 W/mm2, Vo=5 V ELH/EHL E0=0 W/mm2 E1=0.4 W/mm2 RL=1.2 k E0=0 W/mm2 E1=0.4 W/mm2 RL=1.2 k Min. 2.2 - Typ. 0.05 1.3 0.10 0.85 Max. 7.0 0.4 10 3 0.25 - Unit V V A mA W/mm2 - - 4 15 s - 1.5 10 s - 850 - nm - 0.07 1 s - 0.03 1 s www.hamamatsu.com 1 Low-voltage operation photo IC S7610-10 Response time measurement circuit IF IF 5V 50 % RL Vo Pulse input tPLH tPHL 0.1 F VOH 90 % GND 1.5 V 10 % VOL tf tr KPICC0038EA Spectral response Threshold illuminance vs. ambient temperature (Typ. Ta=25 C, Vcc=5 V) Relative sensitivity (%) 80 60 40 20 0 200 400 600 800 1000 (Typ. Ta=25 C, Vcc=5 V, EHL=1.0) 1.5 Threshold illuminance (relative value) 100 HL 1 LH 0.5 0 -50 1200 -25 0 25 50 75 Ambient temperature (C) Wavelength (nm) KPICB0181EA KPICB0029EA Directivity Power dissipation vs. ambient temperature (Typ. Ta=25 C) 20 10 0 10 300 20 40 40 50 50 60 60 70 70 80 80 80 60 40 20 0 20 40 60 80 90 100 Power dissipation (mW) 30 30 90 100 100 200 100 Relative sensitivity (%) KPICB0182EA 0 -25 0 25 50 75 100 Ambient temperature (C) KPICB0049EA 2 Low-voltage operation photo IC S7610-10 Dimensional outline (unit: mm) 4.3 0.3 (Including burr) 4.15 5 3.0 10 2.4 0.6 1.4 10 0.6 0.3 0.45 0.45 2.54 0.5 (Specified at the lead root) GND VO Vcc +0.6 15 Min. 5 (0.8) (1.2) R 0.9 4.6 - 0.3 (Including burr) 4.43 1.43 1.7 Tolerance unless otherwise noted: 0.2, 2 Shaded area indicates burr. Values in parentheses are not guaranteed, but for reference. Lead surface process: Pd plated leads KPICA0044EA 3 Low-voltage operation photo IC S7610-10 Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions Notice Metal, ceramic, plastic package products / Precautions Information described in this material is current as of July, 2013. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KPIC1027E05 Jul. 2013 DN 4