B.J. Wolfe Enterprises, Inc. SIL10E Series mere Single output Woh (800) 554-1224 (818) 889-8412 DC/DC CONVERTERS | E Class Non-isolated 10A Current rating . Input voltage range: 3.0V - 5.5V * Output voltage range: 0.8V - 3.63V * Ultra high efficiency: 95% @ 5Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns * Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required Industry standard footprint and pin out The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or a 3.3V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to 95%. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25C unless otherwise stated SPECIFICATIONS EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage adjustability Fixed output versions 10% Electrostatic discharge _EN61000-4-2, IEC801-2 5Vin with wide trim 3.6V to 0.8V Conducted immunity EN61000-4-6 3.3Vin with wide trim 2.75V to 0.8V Radiated immunity EN61000-4-3 Setpoint accuracy +2.7% GENERAL SPECIFICATIONS Line regulation +1.0% Efficiency See table Load regulation +1.0% Insulation voltage Non-isolated Minimum load 0A Switching frequency Fixed 300kHz typ. Overshoot/undershoot None - - Approvals and EN60950 Ripple and noise 5SOmV pk-pk standards UL/cUL60950 0 to 20MHz BW 25mV rms max. Material flammability UL94V-0 Temperature co-efficient +0.01%/C , a Dimensions (LxWxH) 50.8 x 7.8 x 12.7mm Transient response 50mV max. deviation (Vertical version) 2.0 x 0.31 x 0.5 inches 50us recovery to within +1.0% Pin length Vertical 0.135 +0.02 in (3.43 0.5mm) Remote sense 10% Vo compensation Weight 5g (0.1802) INPUT SPECIFICATIONS MTBF Telcordia SR-332 7,042,000 Input voltage range 3.0 to 5.5VDC Input current No load 70mA Thermal performance Operating ambient, -40C to +100C Input current (max.) 8A max. @ lo max. Nan operatin -40C to +125C and Vout = 3.3V 9 o* Input current ripple 65mA rms Remote ON/OFF (See Note 1) Short-circuit protection Continuous Start-up time 20ms Thermal protection Automatic recovery International Safety Standard Approvals UL60950 file No. E174104 TUV _TUV Product Service (EN60950) Certificate No. BO2 12 38572 035 CB report and certificate to IEC60950 : UL/cUL CAN/CSA 22.2 No. E174104 cA USB.J. Wolfe Enterprises, Inc. SIL10E Series as Single output WI (800) 554-1224 (818) 889-8412 , DC/DC CONVERTERS | E Class Non-isolated -_ ee For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product SIL10E-05S0V8-V SIL10E-0581V0-V SIL10E-05S1V2-V SIL10E-05S1V5-V SIL10E-05S1V8-V SIL10E-05S2V0-V SIL10E-05S2V5-V SIL10E-05S3V3-V SIL10E-05W3V3-V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 4.5V - 5.5V 4.5V - 5.5V 13.2W Part Number System with Options SIL10E-05S3V3-V cers lerei marci ha SIL = Single In Line Rated Output Current 10 = 10Amps Mounting Option V = Vertical Mount H = Horizontal Mount Output Voltage 2.5V, 3.3V etc Number of Outputs S = Single +m rel) Performance E = Enhanced Performace Input Voltage 05 = 3.0V - 5.5V Output Voltage Adjustment of the SIL10E-O5W3V3 Series The uitra-wide output voitage trim range offers major advantages to users who select the SIL10E-O5W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voitage can be trimmed in a range of 0.8V to 3.6V. When the SIL10E-O5W3V3 converter leaves the factory the output has been adjusted to the default voltage of 3.3V When Vin > 4.5V, then Vout can be adjusted from 0.8V to 3.6V @ When Vin < 4.5V, then Vout can be adjusted from 0.8V to 2.75V Notes 1. Referenced to ground for shutdown. If pin 6 is high unit will shutdown. If pin 6 is open unit will operate as normal. Converter is guaranteed OFF when control pin is greater than 1.2V. 2 Full de-rating curves available in both the Long Form Data Sheet and Application Note 134. 3 For certain applications that use low ESR capacitors on the output of the convertor and to insure maximum converter stability, please add the suffix 02 to the model, e.g. SIL1OE-05S2V5-V02. CAUTION: High internal temperatures. Ensure that unit is not user accessible.B.J. Wolfe Enterprises, Inc. SIL10E Series as Single output Wolk DC/DC CONVERTERS | E Class Non-isolated Bs pad perererery PIN VIEW 2.000 +0.020 (60.80 40.50) r 0.500 (12.70) SIDE VIEW PCB a TS | oC tapi 5 oO in qa age oBCo4 A UY os Gabe LC JI 0.316 +0.008. Ji PIN CONNECTIONS (8.05 40.20) 0.100 (2.54) 0.170 (4.32) PIN NUMBER FUNCTION 1.900 (48.26, -=] [= 0.050 (1.27) 1 +Vout Dimensions in Inches (mm) 2 +Vout Tolerances (unless otherwise specified) 2 Place +0.15 3 Remote Sense (+) 5 Place 40.006 4 +Vout 5 Ground Figure 1: Mechanical Drawing - Horizontal Mount Version J2 PIN CONNECTIONS me ela FUNCTION 1 Ground 2 +Vin 3 +Vin 4 No Pin SIDE VIEW FRONT VIEW 5 Trim 0.307 +0.001 2.000 40.020 (7.80 +0,20) (50.80 +0.50) 0.500 (12.70) 6 Remote ON/OFF | - Pcs [ [ 0.135 (3.43) [4 Ho [4 a i | P 1100 Oot fo LV yx ry yur VUUT UY vy f 2346 123 at a2 0.168 (4.26) e} - smwen_| __ 0.050 (1.27) =| 1,900 (48.26) Dimensions in Inches (rm) Toierances (unless otherwise specified) 2 Place 40.15 3 Place +0.006 Figure 2: Mechanical Drawing - Vertical Mount Version Data Sheet Artesyn Technologies 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.