HOOK-UP & LEAD WIRE 3.12
EPDM
High-Temperature
600V, 125°C Flex/150°C No Flex (UL) • 600V, 125°C (CSA)
UL AWM Style 3340 and 3374 • CSA Type CL1254
37118 18 (16x30) .045 1.14 .142 3.61 500 †152.4 7.5 3.4 2, 4, 5, 9, 10, 13
[.82 (16x.25)] 5000 †† 1524.0 70.0 31.8 2, 9, 10, 13
37116 16 (26x30) .045 1.14 .154 3.91 500 †152.4 9.5 4.3 2, 4, 5, 9, 10, 13
[1.32 (26x.25)] 4000 †† 1219.2 72.0 32.7 10
5000 †† 1524.0 90.0 40.9 10
37114 14 (41x30) .045 1.14 .169 4.29 500 †152.4 12.5 5.7 2, 10
[2.08 (41x.25)] 4000 †† 1219.2 96.0 43.6 2, 10
5000 †† 1524.0 125.0 56.8 10
37112 12 (65x30) .045 1.14 .190 4.83 500 †152.4 16.5 7.5 2, 10
[3.29 (65x.25)] 3000 †† 914.4 105.0 47.7 10
5000 †† 1524.0 175.0 79.5 10
37110 10 (65x28) .060 1.52 .240 6.10 500 †152.4 26.0 11.8 10
[5.23 (65x.32)] 2000 †† 609.6 108.0 49.2 10
5000 †† 1524.0 275.0 125.0 10
37108▼8 (84x27) .080 2.03 .327 8.31 250 ** 76.2 22.5 10.2 10
[8.60 (84x.36)] 500 †152.4 48.0 21.8 10
2500 762.0 235.0 106.8 10
37106▼6 (84x25) .080 2.03 .383 9.73 100 * 30.5 14.2 6.5 10
[13.66 (84x.46)] 250 ** 76.2 33.0 15.0 10
500 †152.4 69.0 31.3 10
2500 762.0 345.0 156.8 10
37104▼4 (105x24) .080 2.03 .432 10.97 100 * 30.5 18.7 8.5 10
[21.53 (105x.51)] 250 ** 76.2 50.0 22.7 10
500 †152.4 98.5 44.8 10
1000 304.8 196.0 89.1 10
37103▼3 (133x24) .080 2.03 .453 11.51 100 * 30.5 22.7 10.3 10
[27.28 (133x.51)] 250 ** 76.2 61.8 28.1 10
37102▼2 (163x24) .080 2.03 .494 12.55 100 * 30.5 31.1 14.1 10
[33.43 (163x.51)] 250 ** 76.2 72.3 32.8 10
1000 304.8 286.0 130.0 10
37101▼1 (210x24) .095 2.41 .583 14.81 100 * 30.5 41.0 18.6 10
[43.07 (210x.51)] 250 ** 76.2 95.0 43.2 10
1000 304.8 376.0 170.9 10
37190▼1/0 (262x24) .095 2.41 .633 16.08 50 15.2 24.7 11.2 10
[53.73 (262x.51)] 100 * 30.5 48.3 22.0 10
250 ** 76.2 115.5 52.5 10
500 152.4 223.5 101.6 10
37100▼2/0 (504x26) .095 2.41 .698 17.73 50 15.2 30.9 14.0 10
[67.85 (504x.41)] 100 * 30.5 58.8 26.7 10
250 ** 76.2 141.8 64.4 10
500 152.4 279.5 127.0 10
37130▼3/0 (630x26) .095 2.41 .758 19.25 50 15.2 38.5 17.5 10
[84.81 (630x.41)] 250 ** 76.2 174.0 79.1 10
500 152.4 346.0 157.3 10
37140▼4/0 (805x26) .095 2.41 .849 21.57 50 15.2 44.6 20.2 10
[108.37 (805x.41)] 250 ** 76.2 215.8 98.1 10
500 152.4 449.0 203.7 10
▼Separator over conductor.
†May contain more than one piece. Length may vary ±10% from length shown.
††May contain more than one piece. Minimum length of any one piece is 200 ft.
*100 ft. put-ups are exact, one piece.
**200 ft. put-ups are exact, but may contain 2 pieces max. Minimum length of any one piece is 50 ft.
UL AWM Style 3340 and 3374
600V, 125°C Flex/150°C No Flex
(CSA Type CL1254)
Product Description
The insulation used for this High-
Temperature lead wire is a chemically
cross-linked ethylene-propylene diene
elastomer. Never before could you find
many of the characteristics that are found
in Silicone and Hypalon®combined into
one insulation. This 150°C EPDM wire offers
more abrasion resistance than Hypalon…
has the temperature rating of Silicone…
at a price less than Silicone. EPDM has
exceptional qualities that help you achieve
new levels of economy and quality. 150°C
EPDM wire is recommended for Class
130(B), 155(F) and also in some 180(H)
systems. It’s UL Recognized under
Style 3374 as a 150°C—600V Appliance
Wiring Material. The CSA Listing, as a
coil lead, is 125°C, 600V. For additional
technical information, see Technical
Information pages at the end of this section.
Recommended maximum baking cycles:
24 hours @ 350°F (177°C) • 4 hours @ 375°F (190°C)
Stranded Conductor
Separator Over Conductor
Stranded tinned
copper conductor
Insulation
Thickness
Inch mm
Nominal OD
Part
No.
AWG
(stranding)
[sq.mm]
(stranding in mm) Ft. m
Standard Lengths Standard
Unit Weight
Lbs. kg
Stock Colors
(See Color Codes
Chart on Page 3.29)
Inch mm
For more information, contact Belden Technical Support: 1-800-BELDEN-1 • www.belden.com
Separator
Hypalon is a DuPont trademark.
HOOK-UP & LEAD WIRE 3.13
EPDM
High-Temperature
3•Hook-Up and Lead Wire
600V, 125°C (UL & CSA)
UL AWM Style 3484 • CSA Type AWM
37222 22 (7x30) .030 .76 .093 2.36 ** **
Special Order*
[.36 (7x.25)]
37220 20 (10x30) .030 .76 .102 2.59 ** **
Special Order*
[.51 (10x.25)]
37218 18 (16x30) .030 .76 .109 2.77 ** **
Special Order*
[.81 (16x.25)]
37216 16 (26x30) .030 .76 .123 3.12 ** **
Special Order*
[1.32 (26x.25)]
37214 14 (41x30) .030 .76 .138 3.51 ** **
Special Order*
[2.08 (41x.25)]
37212 12 (65x30) .030 .76 .158 4.01 ** **
Special Order*
[3.29 (65x.25)]
*Contact Belden’s Customer Service Department for order requirements. 1-800-BELDEN-1.
7500V, 150°C (UL)
UL AWM Style 3499
37508 8 (84x27) .125 3.18 .423 10.74 50 * 15.2 9.6 4.4 10
[8.60 (84x.36)] 500 †† 152.4 66.0 30.0 10
1000†† 304.8 130.0 59.1 10
37506 6 (84x25) .125 3.18 .470 11.94 50 * 15.2 11.8 5.3 10
[13.66 (84x.46)] 500 †† 152.4 90.0 40.9 10
1000†† 304.8 176.0 80.0 10
37504 4 (105x24) .125 3.18 .526 13.36 50 * 15.2 15.0 6.8 10
[21.53 (105x.51)] 500 †† 152.4 122.0 55.5 10
1000†† 304.8 240.0 109.1 10
37502 2 (163x24) .125 3.18 .581 14.76 50 * 15.2 19.4 8.8 10
[33.43 (163x.51)] 500 †† 152.4 167.5 76.0 10
1000†† 304.8 333.0 151.4 10
37501 1 (210x24) .125 3.18 .638 16.21 50 * 15.2 23.1 10.5 10
[43.07 (210x.51)] 500†† 152.4 206.0 93.6 10
37590 1/0 (262x24) .125 3.18 .688 17.48 50* 15.2 27.3 12.4 10
[53.73 (262x.51)] 250 †76.2 123.5 56.1 10
500†† 152.4 243.0 110.5 10
37500 2/0 (504x26) .125 3.18 .753 19.13 50* 15.2 34.2 15.5 10
[67.85 (504x.41)] 250 †76.2 150.5 68.4 10
500†† 152.4 302.5 137.5 10
37530 3/0 (630x26) .125 3.18 .813 20.65 50* 15.2 40.5 18.4 10
[84.81 (630x.41)] 250†76.2 184.0 83.6 10
37540 4/0 (805x26) .125 3.18 .909 23.09 50* 15.2 48.7 22.1 10
[108.37 (805x.41)] 250 †76.2 228.8 104.0 10
500†† 152.4 472.0 214.5 10
*50 ft. put-ups are one piece, exact.
†250 ft. put-ups are exact, but may contain 2 pieces max. Minimum length of any one piece is 50 ft.
††May contain more than one piece. Length may vary ±10% from length shown.
UL AWM Style 3484
600V, 125°C
(CSA Type AWM)
Product Description
This series of EPDM (ethylene-propylene
diene elastomer) will provide you with a
lead wire which possesses excellent
characteristics. The reduced wall thickness
results in a UL and CSA Rating of 600V,
125°C. For additional technical information,
see Technical Information pages at the
end of this section.
UL AWM Style 3499
7500V, 150°C
High-Voltage EPDM
Product Description
The insulation used for this High-Voltage
wire is a chemically cross-linked ethylene-
propylene diene elastomer with a separator
for improved strippability. EPDM is naturally
corona resistant and more heat resistant
than many other rubber compounds and
is able to take the longer bake cycles
frequently needed for the big jobs. EPDM
has superior weather resistance and
low temperature pliability. EPDM is used
in many high voltage applications.
For additional technical information,
see Technical Information pages at
the end of this section.
Recommended maximum baking cycles:
24 hours @ 350°F (177°C) • 4 hours @ 375°F (190°C)
Insulation
Thickness
Inch mm
Nominal OD
Part
No.
AWG
(stranding)
[sq.mm]
(stranding in mm) Ft. m
Standard Lengths Standard
Unit Weight
Lbs. kg
Stock Colors
(See Color Codes
Chart on Page 3.29)
Inch mm
For more information, contact Belden Technical Support: 1-800-BELDEN-1 • www.belden.com
Stranded tinned
copper conductor
Stranded tinned
copper conductor
Separator
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Belden Wire & Cable:
37140 010250 37104 0101000 37104 010500 37140 010500 37108 0102500 37116 0104000 37114 0024000
37118 0025000 37118 0135000 37112 0103000 37112 0105000 37118 0105000 37190 010500 37110 0105000
37106 010500 37190 01050 37116 0105000 37106 0102500 37504 01050 37114 0105000 37114 0104000 37106
010100 37190 010250 37118 0095000 37504 0101000
