REV. Status PRELIMINARY 05/31/01 MP PRELIMINARY 1 CHANGED A.4 & MARKING 05/02/02 MP D. Mechanical Specifications; L 12.00[0.472]MAX 12.50[0.492]MAX| Common mode choke for use in ADSL application co A. Electrical Specifications (@ 25C) ti] OD S| O 5 1. Primary Open Circuit Inductance; 5.0mH +7% @ 10KHz, 0.1Vrms, 100mA DC Zz wt Measured (14) | 2) O 2. DC Resistance; (14)=7.59 MAX CO} = (58)=7.50 MAX = 3. Turns Ratio; (14):(58)=1:1.00+2% 4. Dielectric Strength; 1000Vrms 1 second @ Wdg. to Wdg. B. Marking; TTC4096, TAMURA, date code and country of origin C. Schematic; Factory & 1 . 8 Date code 1 . White dot indicates Pin 1 4 : 5 11.50[0.453]MAX Zpo.s0i0.0243V0 8 PLACES 7,50+0.50[0.2960.02]| 2.40[0.090]MIN J. Coleman 1_ 8 2.50+0.30[0.1000.012] PREPARED BY: 4- 5 D. Rund ENGINEER: DWG CONTROL NO.| REV COMMON MODE PA112825 _ M. Pitchai ACAD\TTC\A1128251.0WG |PR1 CHOKE TTC 409 6 QUALITY CONTROL: CONTENTS OF THIS DRAWING ARE TAMURA CORPORATION OF AMERICA MODEL SPECIFICATION D. Kelley PRIOR NOTICE 45552 SIN 5 ARK DRIVE, NEU Seouaee Ot DIM: mm<(In} SCL: 2/1 | SH: 10F 1 APPROVED: PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY TEMS TO WHICH TAMURA RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAW CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING. ING, PRINT OR DOCUMENT IS SUBMITTED IN