Product note SR2 series Metal enclosures for automation and distribution The range of SR2 enclosures is a complete offer of monobloc metal enclosures for constructing small and medium-sized electric switchboards, in particular for control and command or small distribution: their typical use is as an on-board machine switchboard, thermal power station switchboard, pump control switchboard, and others. Construction characteristics The construction characteristics of the series guarantee practical installation and versatility, as well as highly technical features, such as the IP65 degree of protection. The enclosure structure is fitted with two ample cable entry flanges (one for the top and one for the bottom side) so that the whole enclosure is made reversible, offering the possibility of having door opening either on the right or left. The apparatus can be installed either on a blind or slotted back plate or on a DIN rail combined with the various hinged modular panels. Range The range is available in two versions with blind or glass door and is divided into 23 different dimensions: from H=300 to 1200 mm, W=200 to 800 mm and D=150 to 300 mm. Some dimensions can also be stacked vertically, allowing two switchboard sections completely separate from each other to be made inside a single structure. The enclosures can by installed either on the wall using special brackets, or on the floor using a plinth h=100 mm. All the products in the range conform to the national and international standards in force, and in particular with the CEI EN 61439-1 and 2 Standard and have IP65 and TYPE 12 (UL Standard) degree of protection. The mechanical impact rating is IK10 for the version with blind door and IK09 for the version with glass door. Technical characteristics Conformity with CEI EN 62208, CEI EN 60439-1, IEC61439-1-2 Degree of protection IP65 (CEI EN 60529) - TYPE 12 (Normativa UL) Mechanical impact rating IK10 blind door IK09 glass door (IEC 62262) Certifications II 3 G D Type of metal Installation site Fixing method Normal service conditions - ambient temperature Atmospheric conditions - relative humidity material indoor wall/floor from -5 to +40 C 50% at 40 C 90% at 20 C For further information, please consult the "General Catalogue. Switchboards for automation" technical catalogue (cod. 1STC804013D0902). SR2 series Metal enclosures for automation and distribution Selection table Overall dimensions Enclosure with blind door Enclosure with glass door Components for automation Frame for DIN rail H [mm] W [mm] D [mm] 200 300 Enclosure with blind door (with mounting plate) Enclosure with glass door (without mounting plate) IP20 Blind counterdoor Blind mounting Slotted mounting plate plate N vertical modules H=185mm N DIN modules per row Total Fu installable fo modules mod SRN3215K PF3020 TQ3020 SRN3315K PF3030 TQ3030 SRN3415K PF3040 TQ3040 PF4030 TQ4030 SRN4420K PF4040 TQ4040 600 SRN4620K PF4060 TQ4060 300 SRN5320K PF5030 TQ5030 KC5040K PF5040 TQ5040 2 14 28 KC6040K PF6040 TQ6040 3 14 42 PF6060 TQ6060 KC7050K PF7050 TQ7050 KC8060K PF8060 TQ8060 4 25 100 PF8080 TQ8080 PF1060 TQ1060 25 125 300 150 400 300 150 300 SRN4315K SRN4320K 400 400 200 200 500 600 400 400 250 400 200 400 SRN5420K SRN5420VK SRN5425K SRN5425VK SRN6420K SRN6420VK SRN6425K SRN6425VK 250 600 SRN6625K 500 200 SRN7520K SRN7520VK 500 250 SRN7525K SRN7525VK 600 250 700 800 600 SRN8625K SRN8625VK SRN8630K SRN8630VK 300 800 600 SRN8830K 250 SRN10625K SRN10625VK SRN10630K SRN10630VK 800 SRN10830K SRN10830VK KC1080K PF1080 TQ1080 36 180 600 SRN12630K SRN12630VK KC1260K PF1260 TQ1260 25 150 36 216 KC1060K 1000 600 5 300 1200 300 800 SR2 Enclosures | ABB 6 SRN12830K SRN12830VK KC1280K PF1280 TQ1280 Components for distribution DIN rail DIN rail Kit al Functional frame able for mounting the les modular components KD5040 KD6040 Hinged panel + DIN rail and fixing brackets PM1414K PM1414K Accessories for stacking possibility Modular panels Blind hinged panels Hinged panels for measuring instruments PS2476K PS2476K H=185mm H=370mm 5 KD8060 KD1060 PM1625K PM1625K PS2676K PS2676K Plinth GZ4020 ZA4020 GZ4020 ZA4020 PC1406K GZ4025 ZA4025 GZ4020 ZA4020 GZ4025 ZA4025 GZ6025 ZA6025 GZ6025 ZA6025 GZ6030 ZA6030 PC1406K PC2606K 0 IP65 gasket PC1606K PC1606K GZ8030 ZA8030 GZ6025 ZA6025 GZ6030 ZA6030 PC2606K 0 KD1080 PM1836K PS2876K PC1806K PC2806K GZ8030 ZA8030 0 KD1260 PM1625K PS2676K PC1606K PC2606K GZ6030 ZA6030 6 KD1280 PM1836K PS2876K PC1806K PC2806K GZ8030 ZA8030 SR2 series Metal enclosures for automation and distribution Accessories DIN rail and fixing brackets Brackets for wall fixing Code Description Dimensions mm (W) GD4006 DIN rail and fixing brackets (14 mod.) 400 GD6006 DIN rail and fixing brackets (25 mod.) 600 These allow wall installation of the enclosures and are mounted using the special holes located on the rear of the enclosures. Made of 25/10 thick steel sheet and treated with white galvanization. GD8006 DIN rail and fixing brackets (36 mod.) 800 Code Description AA1206 N4 Brackets for wall fixing Depth adapter Code Description AP6001 Depth adapter for Tmax XT1-XT2-XT3 Dimensions mm (W) 600 AA8010 AA8011 Hole-covering strip Code Description AD1086 N10 slit covers W=2000 mm grey RAL 7035 colour AD1088 N3 slit covers DIN 24 modules grey RAL 7035 colour AD1089 N3 slit covers DIN 36 modules grey RAL 7035 colour Neutral or earthing busbars The busbars, made of electrolytic copper with M6 threaded holes with 25 mm pitch, can be mounted on the back plates by means of special supports. They must be sized according to the enclosure and their installation position. Code Description AA8010 N4 busbars cross-sect. 20x5 mm AA8011 Dimensions mm (W) 1000 N5 busbar supports Closing caps for instrument panels Code Description EV1135 N10 closing caps for 72x72 mm instrument panel EV1136 N5 closing caps for 96x96 mm instrument panel Sections for accessories These allow accessories to be fixed (e.g. wiring ducts) inside the blind doors. They consist of a pair of white galvanized sheet vertical crosspieces 15/10 thick pre-drilled with 25 mm pitch. In the 1000 and 1200 mm high enclosures with blind door, the sections are already provided. Adhesive label holder Code Description Code Description Dimensions mm (W) EH2118 N20 label holders 18 DIN mod. 325 TS6009 N2 sections for door 600 EH2129 N20 label holders 29 DIN mod. 525 TS7009 N2 sections for door 700 AD1600 N20 label holders 24 DIN mod. 432 TS8009 N2 sections for door 800 AD1800 N20 label holders 36 DIN mod. 634 Dimensions mm (W) A4 Labels Diagram pockets Made of plastic, grey RAL 7035 colour, size A4. The pocket can be applied inside the blind doors with width higher than 400 mm, by means of the adhesive provided. Code Description AD1101 (2) N288 labels 1 DIN mod. AD1102 (2) N192 labels 2 DIN mod. AD1103 (2) N96 labels 3 DIN mod. N96 labels 4 DIN mod. Code Description AD1104 (2) EV1075K Plastic diagram pockets for A4 (2) Labels writable using compatible Grafoplast system SR2 Enclosures | ABB Overall dimensions Front view Modular panels and internal counte rdoor I 40 35,5 43 G Fairlead flange 1.5 E D o 43 C F (*) 35,5 F (*) 1 117-217-317 417-517-717 4 20 L 43 1 F (*) 46 A H 43 (**) 18 1.5 43-93 143-193 (****) 75 80 M6 (***) 60.5 80 B A B C D SRN3215K 303 203 147 82 SRN3315K 303 303 147 82 SRN3415K 303 403 147 82 SRN4315K 403 303 147 82 SRN4320K 403 303 197 132 SRN4420K 403 403 197 132 SRN4620K 403 603 197 132 SRN5320K 503 303 197 132 SRN5420K 503 403 197 132 SRN5425K 503 403 247 SRN6420K 603 403 SRN6425K 603 SRN6625K F (*) G H I L 133,5 151,5 133,5 151,5 163 337 237 263 263 337 337 263 133,5 151,5 133,5 201,5 363 337 437 263 437 183,5 201,5 183,5 201,5 263 363 183,5 201,5 183,5 251,5 E (*) Locks (F) no1 central for enclosures with h=303 to 503 mm no2 for enclosures with h=603 to 703 mm (F=100 mm) no2 for enclosures from h=803 to 1203 mm (F=150 mm) (**) Coppered pin only for enclosures from h=1003 to 1203 mm (***) Coppered pin on the door no1 for enclosures from h=303 to 503 mm no4 for enclosures from h=603 to 803 mm no6 for enclosures from h=1003 to 1203 mm (****) Flange fixing holes no4 for enclosures from W=203 mm no6 for enclosures from W=303 to 403 mm no8 for enclosures from W=503 to 1203 mm B C D E F (*) G H I L SRN10625K 1003 603 247 182 233,5 150 563 1037 637 963 SRN10630K 1003 603 297 232 283,5 150 563 1037 637 963 263 SRN10830K 1003 803 297 232 283,5 150 763 1037 837 963 337 363 SRN12630K 1203 603 297 232 283,5 150 563 1237 637 1163 437 337 363 SRN12830K 1203 803 297 232 283,5 150 763 1237 837 1163 437 437 363 SRN5420VK 503 403 197 132 183,5 150 363 537 437 463 563 437 637 363 SRN5425VK 503 403 247 182 233,5 150 363 537 437 463 263 537 337 463 SRN6420VK 603 403 197 132 183,5 150 363 637 437 563 363 537 437 463 SRN6425VK 603 403 247 182 233,5 150 363 637 437 563 182 183,5 251,5 233,5 251,5 363 537 437 463 SRN7520VK 703 503 197 132 183,5 150 463 737 537 663 197 132 183,5 100 363 637 437 563 SRN7525VK 703 503 247 182 233,5 150 463 737 537 663 403 247 182 233,5 100 363 637 437 563 SRN8625VK 803 603 247 182 233,5 150 563 837 637 763 603 603 247 182 233,5 100 563 637 637 563 SRN8630VK 803 603 297 232 283,5 150 563 837 637 763 SRN7520K 703 503 197 132 183,5 100 463 737 537 663 SRN10625VK 1003 603 247 182 233,5 150 563 1037 637 963 SRN7525K 703 503 247 182 233,5 100 463 737 537 663 SRN10630VK 1003 603 297 232 283,5 150 563 1037 637 963 SRN8625K 803 603 247 182 233,5 150 563 837 637 763 SRN10830VK 1003 803 297 232 283,5 150 763 1037 837 963 SRN8630K 803 603 297 232 283,5 150 563 837 637 763 SRN12630VK 1203 603 297 232 283,5 150 563 1237 637 1163 SRN8830K 803 803 297 232 283,5 150 763 837 837 763 SRN12830VK 1203 803 297 232 283,5 150 763 1237 837 1163 A O 150 * The counterdoors with H 500 mm, 600 mm, 700 mm, only have a centre hole for the lock O 160 260 360 360 260 360 360 560 460 560 760 560 760 560 760 P 260 260 260 360 460 460 560 560 660 760 760 960 960 1160 1160 14 14 Code PF3020 PF3030 PF3040 - PF4030 PF4040 PF5030 PF5040 PF6040 - PF4060 PF6060 PF7050 PF8060 PF8080 PF1060 PF1080 PF1260 PF1280 14 14 N 360 360 460 560 560 760 560 760 150 M 456 556 656 756 956 956 1156 1156 M Code KC5040K* KC6040K* KC7050K* KC8060K KC1060K KC1080K KC1260K KC1280K Internal plates 35 P Internal counterdoors (**) 35 10,5 13 N SR2 Enclosures | ABB ABB SACE A division of ABB S.p.A. Automation and Distribuition Boards Via Italia, 58 23846 Garbagnate Monastero (LC) - Italy Tel.: +39 031 3570 1 Fax: +39 031 3570228 www.abb.com The data and illustrations are not binding. We reserve the right to modify the contents of this document on the basis of technical development of the products, without prior notice. Copyright 2010 ABB. All rights reserved. 1STC804017L0201 - 12/2010 - 5.000 Contact us