PHOTOCOUPLER
PS2701A-1
HIGH ISOLATION VOLTAGE
SOP PHOTOCOUPLER
NEPOC Series
Document No. PN10396EJ05V0DS (5th edition)
Date Published August 2009 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DESCRIPTION
The PS2701A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor to realize an excellent cost performance.
This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light.
It is designed for high density mounting applications.
FEATURES
High isolation voltage (BV = 3 750 Vr.m.s.)
SOP (Small Outline Package) type
Ordering number of taping product: PS2701A-1-F3, F4: 3 500 pcs/reel
Pb-Free product
Safety standards
UL approved: No. E72422
CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008902 (Option)
APPLICATIONS
Hybrid IC
Measuring instruments
Power supply
Programmable logic controllers
<R>
Data Sheet PN10396EJ05V0DS
2
PS2701A-1
PACKAGE DIMENSIONS (in millimeters)
PHOTOCOUPLER CONSTRUCTION
Unit (MIN.)
5 mm
5 mm
2.5 mm
0.3 mm
MARKING EXAMPLE
Pb-Free Special version (Pb-Free and Halogen Free)
<R>
<R>
Data Sheet PN10396EJ05V0DS
3
PS2701A-1
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application
Part Number*1
PS2701A-1
PS2701A-1-A
Pb-Free
Magazine case 100 pcs
Standard products
PS2701A-1
PS2701A-1-F3
PS2701A-1-F3-A
Embossed Tape 3 500 pcs/reel
(UL, CSA approved)
PS2701A-1-F4
PS2701A-1-F4-A
PS2701A-1-V
PS2701A-1-V-A
Magazine case 100 pcs
DIN EN60747-5-2
PS2701A-1-V-F3
PS2701A-1-V-F3-A
Embossed Tape 3 500 pcs/reel
(VDE0884 Part2)
PS2701A-1-V-F4
PS2701A-1-V-F4-A
Approved (Option)
PS2701A-1
PS2701A-1Y-A
Special version
Magazine case 100 pcs
Standard products
PS2701A-1
PS2701A-1-F3
PS2701A-1Y-F3-A
(Pb-Free and
Embossed Tape 3 500 pcs/reel
(UL, CSA approved)
PS2701A-1-V
PS2701A-1Y-V-A
Halogen Free)
Magazine case 100 pcs
DIN EN60747-5-2
PS2701A-1-V-F3
PS2701A-1Y-V-F3-A
Embossed Tape 3 500 pcs/reel
(VDE0884 Part2)
Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
<R>
Data Sheet PN10396EJ05V0DS
4
PS2701A-1
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Diode
Forward Current (DC)
IF
30
mA
Reverse Voltage
VR
6
V
Power Dissipation Derating
PD/ C
0.8
mW/ C
Power Dissipation
PD
80
mW
Peak Forward Current*1
IFP
0.5
A
Transistor
Collector to Emitter Voltage
VCEO
70
V
Emitter to Collector Voltage
VECO
5
V
Collector Current
IC
30
mA
Power Dissipation Derating
PC/ C
1.5
mW/ C
Power Dissipation
PC
150
mW
Isolation Voltage*2
BV
3 750
Vr.m.s.
Operating Ambient Temperature
TA
55 to +100
C
Storage Temperature
Tstg
55 to +150
C
*1 PW = 100 s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
Data Sheet PN10396EJ05V0DS
5
PS2701A-1
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
Diode
Forward Voltage
VF
IF = 5 mA
1.2
1.4
V
Reverse Current
IR
VR = 5 V
5
A
Terminal Capacitance
Ct
V = 0 V, f = 1.0 MHz
10
pF
Transistor
Collector to Emitter Dark
Current
ICEO
IF = 0 mA, VCE = 70 V
100
nA
Coupled
Current Transfer Ratio
(IC/IF)*1
CTR
IF = 5 mA, VCE = 5 V
50
300
%
Collector Saturation
Voltage
VCE (sat)
IF = 10 mA, IC = 2 mA
0.13
0.3
V
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
1011
Isolation Capacitance
CI-O
V = 0 V, f = 1.0 MHz
0.4
pF
Rise Time *2
tr
VCC = 5 V, IC = 2 mA, RL = 100
5
s
Fall Time *2
tf
7
*1 CTR rank
N: 50 to 300 (%)
P: 150 to 300 (%)
L: 100 to 300 (%)
M: 50 to 150 (%)
*2 Test circuit for switching time
Data Sheet PN10396EJ05V0DS
6
PS2701A-1
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10396EJ05V0DS
7
PS2701A-1
Remark The graphs indicate nominal characteristics.
Data Sheet PN10396EJ05V0DS
8
PS2701A-1
TAPING SPECIFICATIONS (in millimeters)
Data Sheet PN10396EJ05V0DS
9
PS2701A-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
Peak reflow temperature 260 C or below (package surface temperature)
Time of peak reflow temperature 10 seconds or less
Time of temperature higher than 220 C 60 seconds or less
Time to preheat temperature from 120 to 180 C 120 30 s
Number of reflows Three
Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(2) Wave soldering
Temperature 260 C or below (molten solder temperature)
Time 10 seconds or less
Preheating conditions 120 C or below (package surface temperature)
Number of times One (Allowed to be dipped in solder including plastic mold portion.)
Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
Peak temperature (lead part temperature) 350 C or below
Time (each pins) 3 seconds or less
Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 C.
Data Sheet PN10396EJ05V0DS
10
PS2701A-1
(4) Cautions
Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10396EJ05V0DS
11
PS2701A-1
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Spec.
Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1)
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 UIORM, Pd 5 pC
UIORM
Upr
707
1 060
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM, Pd 5 pC
Upr
1 325
Vpeak
Highest permissible overvoltage
UTR
6 000
Vpeak
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
2
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
CTI
175
Material group (DIN EN 60664-1 VDE0110 Part 1)
III a
Storage temperature range
Tstg
55 to +150
C
Operating temperature range
TA
55 to +100
C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25 C
VIO = 500 V dc at TA MAX. at least 100 C
Ris MIN.
Ris MIN.
1012
1011
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Tsi
Isi
Psi
Ris MIN.
150
300
500
109
C
mA
mW
<R>
Data Sheet PN10396EJ05V0DS
12
PS2701A-1
PS2701A-1
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.